A:AnswerNot sure of the cost to repair, we can provide you a list of authorized service centers in your area. Please reach out to our Support team on Twitter via @LGUSSupport or on Facebook at https://www.facebook.com/LGUSA. ^Daphane
A:AnswerThe matching dryer models DLE3400W, DLG3401W, uses a 4" rigid, semi-rigid or flexible metal ductwork inside the dryer cabinet and for venting outside. The total length of flexible metal duct must not exceed 8 ft. (2.4 m). The number of allowable 90 degree elbows are 4 for 28 feet. ^Daphane
A:AnswerI cannot confirm compatibility. Pedestal #LG27 is not a valid model number. Model WM3400 is a 27" unit and the compatible pedestal is model WDP4W or LG Sidekick Pedestal Washer WD100CW. ^Daphane
A:AnswerI cannot confirm capability for the new washer to be stacked with the existing dryer, model DLG2522W. They may not have a compatible footprint to allow stacking. The may because they are both 27" wide. ^Daphane
A:AnswerThe Control function can be disabled from the control panel. If you are in need of further assistance, please reach out to our support team on Twitter via @LGUSSupport or on Facebook at https://www.facebook.com/LGUSA or call at 800-243-0000. ^Daphane
A:AnswerThis dryer has been tested for clearances of 1 inch (2.5 cm) on the sides and rear. Recommended clearances should be considered for the following reasons: • Additional clearances should be considered for ease of installation and servicing. • Additional clearances should be considered on all sides of the dryer to reduce noise transfer. For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilation openings are acceptable. The side venting kit is part number 3911EZ9131X. It is available at https://lgparts.com/item/6690199/LG/383EEL9001B/. ^Daphane
A:AnswerYou can view the support page at https://www.lg.com/us/washers/lg-wm3400cw-front-load-washer. I do not know if the unit is available at your local Best Buy for you to physically see in in person, try contacting the store directly. ^Daphane
A:AnswerI am not able to verify the current model. The width of model WM3400CW 27". As long as they have the same widths given that it is compatible for stacking you should be able to use the existing stacking kit. The stacking kit for this model is KSTK1. If you are in need of further assistance, please reach out to our support team on Twitter via @LGUSSupport or on Facebook at https://www.facebook.com/LGUSA or call at 800-243-0000. ^Daphane
A:AnswerThis unit is a washing machine. The matching dryers, Gas DLG3401W/Electric DLE3400W, have side venting options. Right-side venting is not available on gas models. ^Daphane
A:AnswerI sincerely apologize, I am not able to verify compatibility of this kit with a Kenmore unit. For assistance with this issue, please contact Kenmore directly at 1-888-536-6673.
A:AnswerPlease verify the model number provided, wm3401w. This is not a valid model number for a dryer. The matching gas dryer is model DLG3401W, can be vented to the left side. Right-side venting is not available on gas models. ^Daphane
A:AnswerWe have the matching #DLE3400W electric dryer and total height with legs all the way in is 78.5 in and got thru the closet door with an inch to spare
