“What screws do the surround speakers use for stand mounting? I bought a 'universal' stand and the screws were way too big for the surround speaker holes.”
Answer This Question
1-1 of 1 Answer
Hello there! We understand your inquiry about mounting the S80TR rear surround speakers on a stand. Based on the Owner's manual page 50 for Mounting the model: The mounting holes on the back of each wireless rear speaker are designed for metric M4 machine screws (4 mm diameter) with a maximum length of 10 mm so that the screw head secures the speaker without touching any internal components. As a quick troubleshooting step, we recommend measuring your stand’s mounting-post screw diameter with a simple gauge or by comparing against an M4 screw from a hardware kit. If the screws that came with your universal stand are too large, try sourcing M4 × 8–10 mm pan-head or flat-head machine screws—adding a small flat washer under the head can help distribute pressure evenly and prevent the screw from bottoming out inside the speaker housing. Hand-tighten gently; over-torquing can damage the internal bracket threads. Owner's manual: https://www.lg.com/us/support/product/lg-S80TR.DUSALLK If you continue to have difficulty finding the right screws or if your stand requires a different thread pitch, please send us a private message on social media @LGUSSupport. We’ll be more than happy to check your stand’s specs and guide you to the exact hardware or replacement options you need. We appreciate your patience and are here to ensure your S80TR system sounds its best! —Renzo
Sorry, there was a problem. Please try again later.