A:AnswerWhile there will be some interchangeability in washer and dryer models across the same brand, you will not be able to stack laundry units from two different brands. ^Daphane
A:AnswerNo, the washer and pedestal should be the same widths. WDP4B Laundry Pedestal – Black Steel, https://www.lg.com/us/laundry-accessories/lg-WDP4B. ^Daphane
A:AnswerYes I although I'm not sure on the exact size you need to measure your washer and dryer but they do have a smaller one then the one I received which was 27 inches.
A:AnswerI do not think you can because the y-connector feeds the water from the washer to the sidekick. To confirm or verify, please reach out to our support team on Twitter via @LGUSSupport or on Facebook at https://www.facebook.com/LGUSA. ^Daphane
A:AnswerThe LG 9.0 cu. ft. Large Smart wi-fi Enabled Electric Dryer w/ TurboSteam™, Model # DLEX9000V is compatible with the LG 29" Laundry Pedestal with Storage Drawer - Graphite Steel, Model # WDP5V...^IFV
A:AnswerI am sorry, the factory did not provide a specification for the inside of the pedestal. Please seek help in the LG Community Forum, https://lgcommunity.us.com. The LG Community Forum is a great resource for getting help from other LG customers. ^Daphane
A:AnswerYou cannot install an LG pedestal under a stacked washer and dryer. As you noted, that would be too much weight on the pedestal, but it will also put the controls for the dryer at an impossible height to reach and at that height with that much weight, that would be a potentially hazardous situation...^IFV
A:AnswerThe LG 29" Laundry Pedestal with Storage Drawer, Model # WDP5V or any other LG Laundry Pedestal are not designed to decrease vibrations or noise, but they can exacerbate the issue if they are not installed properly or if you raise the leveling legs on them unnecessarily. The leveling legs on the washer that you install the pedestal under and those on the pedestal have to be lowered to prevent excessive noise and vibrations. Leveling feet
that can move or slide on the floor can contribute to
excess vibration and noise due to poor contact with
the floor. Your washer should also be installed on a solid floor that is strong and rigid enough to support the weight of the washer, even when fully loaded, without flexing or bouncing. If the floor has too much flex, you may need to reinforce it to make it more rigid. If the floor is not solid, it may cause severe vibration and noise...^IFV
A:AnswerI have that washer and dryer on these pedestals. The W/D depth include the contours of the front, the door and handle and anything else. The machines are nice, clean well, do incredibly large loads as well as smaller ones, are quiet and so easy to use. The pedestals not only put them at a nice height, but they hold a lot, so be sure to use the space (cleaning supplies, washing bags, rags, light bulbs, vacuum attachments, pet supplies (don't put food under the washer - just in case), roasting pans, etc.). These replaced a previous LG pair I was very happy with. I love the slight changes -- like the washer door holding ajar to let the drum dry out without standing open and the large drum for drying quilts or comforters. I didn't have the old pedestals to compare, but these seem just a bit deeper. So, yes -- right pedestals and you will love the whole set up.
