1-10 of 11 Answers
no but i took a really large zip tie then put a screw in one end on the left side of the router and screwed in the strap then pulled the strap acrossed, started my second screw into the strap and screwed that side too then clipped off the excess thats only on the last side
Sorry, there was a problem. Please try again later.The quick answer is no. I suppose you could use velcro adhesive strips and attach it to the wall that way but at $399.00 I wouldn't dare attempt it.
Sorry, there was a problem. Please try again later.I wall mounted mine using a wire-mesh paper tray. Something similar to this (https://www.amazon.com/dp/B00SGDHRZE/ref=cm_sw_em_r_mt_dp_U_I8R8CbEHNHG26) a few zip ties to hold it in. black ones wouldn't have been quite so obvious but I couldn't find them and I wanted it up. with a little more ingenuity, someone could modify the tray to allow the wired connections to come into the bottom.
Sorry, there was a problem. Please try again later.Hi! The EA9500 can't be mounted on the wall. For more info about the EA9500 router, check out this link: http://www.linksys.com/us/support-article?articleNum=178062 .
Sorry, there was a problem. Please try again later.No, plugs for cords are in the way, it does not have any wall-mounting holes, and it has a base that would prevent it from sitting flush with the wall. You can always put it on a shelf, of course.
Sorry, there was a problem. Please try again later.No it is not. You could build a small shelf on the wall to hold it, if that is your requirement.
Sorry, there was a problem. Please try again later.No, it's very big and a lot heavier than most home router's and there isn't any nail slots on the bottom. Your best bet would be to put a 12 inch shelf on the wall.
Sorry, there was a problem. Please try again later.No slots/openings are provided for wall mounting
Sorry, there was a problem. Please try again later.No... But I think you can buy wall mounts...
Sorry, there was a problem. Please try again later.Not its not wall mountable, It's HUGE trust me.
Sorry, there was a problem. Please try again later.
