Can you select the area of motion detection on the SW? Meaning I could select the space the camera would detect motion like around my front door but not the street? null

Question

Marvroom · Accepted Answer

Yes you can. I did this with my front door camera. There is a pan and zoom in the options to help you do this as well as motion detection sensitivity. My issue was the camera was catching my neighbors driveway a bit. Kept getting alerts every time they went up or down the drive with their car. The pan and zoom let me cut off the sliver of the drive in the cameras view without having to adjust the camera physically again.

Answered by Marvroom 9 years ago

Verified Purchase

fatcat · Answer

yes, you can pan and zoom in on a specific area. However they are NOT reliable. Motion detection is shoddy at best

RichardE · Answer

The camera’s field of view determines what motion is detected. If you don’t want the street, you must be sure the street is not in the camera’s field of view. You can adjust the sensitivity of each camera individually so you may be able to have the camera not notice a car in the distance but notice a person walking right up to the camera.

Answered by RichardE 9 years ago

Aware73 · Answer

Yes. It takes a bit of tweaking the settings. Once you set it up you can adjust what in the cameras range you want it to focus on. But...if cars constantly cross the field it will most likely trigger it, so you may need to adjust height and angle.

Answered by Aware73 9 years ago

“Can you select the area of motion detection on the SW? Meaning I could select the space the camera would detect motion like around my front door but not the street?”

1-4 of 4 Answers