Early Black Friday Deals & DoorbustersEnds Nov. 8.Shop now

Main Content

Questions & Answers

Page Showing 41-52 of 52 questions
  • QuestionCan this unit be hooked to a refrigerator Ice Machine?

    Asked by Twiggy.

    • Answer No, this can not be hooked up to refrigerator Ice Machine.

      Answered by CommunityAnswer

  • QuestionDoes this unit have a direct hook-up capability to a water supply?

    Asked by RBGcs.

    • Answer It appears so. But I can't figure out how to do it without spilling water all over the floor. Having a difficult time finding instructions, but there appears to be a hook-up in the back that corresponds to our wall supply outlet.

      Answered by Anonymous

  • QuestionIs it star energy? How is the electric usage?

    Asked by Fec.

    • Answer The dispenser is Energy Star compliant. It uses less than the Energy Star guideline of 0.87 kwh/day.

      Answered by PrimoWaterCustomerService

  • QuestionIs it a BPA Free?

    Asked by Matt.

    • Answer Yes, all components that come in contact with water are BPA free.

      Answered by PrimoWaterCustomerService

  • QuestionAvailability

    Asked by Anonymous.

    • Answer Yes

      Answered by Blessed

  • QuestionDo you have the dispenser in just stainless-steel color?

    Asked by Anonymous.

    • Answer There is a black one as well

      Answered by Dadbodgamer

  • QuestionWhat is the measurement from the bottom of the water spout to the top of the tray (ie what size bottle can you fill in inches)?

    Asked by TXwildflower.

    • Answer about 5 and a half inches

      Answered by chipchipperson

  • QuestionWhen I use the keurig function, it will dispense the coffee perfectly, but right at the end of dispensing, it spurts out an extra amount of water which makes coffee leak out of the sides and creates a mess on the machine. How can this be fixed?

    Asked by SAHM3.

    • Answer Thank you for providing your feedback. We apologize for any inconvenience this may have caused and, we would love the opportunity to assist with this matter. To better assist you, can you please message us the phone number and address associated with your account to the following email: social@primowater.com? We look forward to hearing from you. Thank you - Cassandra P.

      Answered by PrimoWaterCustomerService

  • QuestionHow do I drain and clean system

    Asked by Em.

    • Answer Good Afternoon, Thank you for reaching out to us. Below are instructions for cleaning your Primo water dispenser. We recommend that you do this once every three months. How-to video: https://www.youtube.com/watch?v=QwdSPu2TYjo Time Required:  30 minutes   Need:   ( cups of distilled white vinegar, (1) Empty 2) tablespoon regular bleach or (2)5-gallon bottle, (1) 2-gallon bucket, and a Philips head screwdriver.   1. Turn energy saving switches to OFF.   2. Remove the water bottle.   3. Move appliance away from the wall to gain access to the back.   4. Remove remaining water from reservoirs by dispensing from the hot and cold taps into a pitcher or bucket.  5. Remove the cap from a spare empty 5-gallon bottle. Pour the bleach (2 tbsp.) or vinegar (2 cups) and hot tap water (2 Gallons) into the empty bottle.   6. Apply the cleaning bottle to the dispenser.   7. Allow the cleaning solution to fill the reservoirs.   8. Wait 10 minutes, then drain the water from the reservoirs as described in step 5.    9. Rinse the bottle and fill with only hot tap water and apply it to the dispenser.   10. Place a two gallon bucket in the back of the appliance and remove the drain plug and cap as illustrated, while also flushing water through the taps (step 5).   11. Replace the silicone plug and drain cap.   12. Return the unit to its location, install a fresh water bottle, and turn the energy-saving switch ON. Best Regards, José R.

      Answered by PrimoWaterCustomerService

  • QuestionI have a Primo top loading machine. I buy my water at a large warehouse store-it's cheaper. Almost always, the bottle tends to collapse on the machine. Now, I've noticed water leaking around the top of the machine.

    Asked by Martin.

    • Answer Thank you for reaching out to us. We are very sorry to hear that you are having issues with your water dispenser. I’d love to help you find a solution to this issue. The leaking sounds like the unit is overflowing. On most bottom loaders, there is a hole that allows excess water to escape from the cold water reservoir if the pump is sending too much water. This would show how to take care of it: https://youtu.be/SRfnmQOUcLs. If this does not fix the issues, please email us at social@primowater.com with the below information, so that we can look into other options that may be available to resolving the concerns: A Picture of the back of the unit: Full Name: Email address: Phone number: Shipping address: Model number: Serial Number (10 digits on a white sticker on back of unit): What brand of water do you drink?: Is this your first dispenser purchase (any brand), what made you decide to purchase a dispenser if this is your first? Best Regards, Jose R.

      Answered by PrimoWaterCustomerService

  • Questionwill this work with 3 gallon bottles of water from Culligan?

    Asked by Anonymous.

    • Answer Yes, any 5 or 3-gallon bottle should work; however, please note that American Maid brand bottles do not fit our dispensers.

      Answered by PrimoWaterCustomerService

  • QuestionEvery time I’m done getting water more water comes out from the dispenser. I’ll go push the button, fill up my cup, then stop and bursts of water will come out every 2-4 seconds and like 3-5 times.

    Asked by Anonymous.

    • Answer Good Afternoon, Thank you for bringing this matter to our attention. Below are a few troubleshooting tips to assist in resolving this matter: The leaking sounds like the unit is overflowing. On most bottom loaders, there is a hole that allows excess water to escape from the cold water reservoir if the pump is sending too much water. This link would show how to take care of it: https://youtu.be/SRfnmQOUcLs. If the video doesn’t help, the unit may have a failed sensor, in which case you would need to contact customer service to do further troubleshooting.  If it does not fix the issue, please email us at Primo@primowater.com or contact us at 844-237-7466. Our Customer Care Agents are available Monday through Friday 8:00 a.m. – 9:00 p.m. EST and Saturday 9:00 a.m. – 6:00 p.m. EST. Best Regards, José R.

      Answered by PrimoWaterCustomerService