Can the gas model be fitted for propane source? null

Hi Debs. Thank you for reaching out regarding your Samsung - 7.5 Cu. Ft. Stackable Gas Dryer with Sensor Dry if this model can be fitted with propane. Regarding your concern, yes, this can be fitted with propane. Here are the details you need to consider if you will be using propane. • Use only natural or LP (liquid propane) gases. • The installation must be conformed with local codes, or in the absence of local codes, with the national fuel gas code, ANSI Z223.1/NFPA 54, latest revision(for the UNITED STATES), or with the natural gas and propane installation code, CSA B149.1(for Canada). • Gas dryers are equipped with a burner vent for use with natural gas. If you plan to use your dryer with LP (liquid propane) gas, it must be converted for safe and proper performance by a qualified service technician. (LNG models only) You must check the burner of your model and use the proper LP Kit accordingly. To check the detail information of the burner, open the door and check the rating label location on the door frame. - 20,000 BTU: LPKIT-4/XAA (DC98-04114A) - 22,000 BTU: LPKIT-3/XAA (DC99-00792A) • A 1/2” (1.27 cm) gas supply line is recommended and must be reduced to connect to the 3/8” (1 cm) gas line on your dryer. The National Fuel Gas Code requires that an accessible, approved manual gas shut-off valve be installed within 6” of your dryer. • Gas dryers installed in residential garages must be raised 18 inches (46 cm) above the floor. • Additionally, a 1/8” (0.3 cm) N.P.T. (National Pipe Thread) plugged tapping, accessible for test gauge connection, must be installed immediately upstream of your dryer’s gas supply connection. • Your dryer must be disconnected from the gas supply pipe system during any pressure testing of the system. • Do not reuse old flexible metal gas lines. Flexible gas lines must be designed and certified by the standard for connectors for Gas Appliances, ANSI Z21.24 • CSA 6.10. NOTE • Your dryer uses an automatic ignition system to ignite the burner. There is no constant burning pilot. • Any pipe joint compound used must be resistant to the action of any liquefied petroleum gas. • As a courtesy, most local gas utilities will inspect a gas appliance installation I suggest you check your user manual for further assistance. Here is the link. Please go to page 17. https://downloadcenter.samsung.com/content/UM/202101/20210108102221776/DV6000_DC68-03381W-03_EN_CFR_MES.pdf Should you need more assistance, please feel free to get back to us via the following options: 1. Facebook Messenger: http://m.me/samsungsupport 2. Twitter: https://twitter.com/messages/compose?recipient_id=18768513 3. Samsung Community: https://us.community.samsung.com/t5/Samsung-Community/ct-p/us Thank you for being a valued customer of Samsung. Have a great day. Reference Ticket Number: 1144326739 ^Camille

“Can the gas model be fitted for propane source?”

Asked by Debs 3 years ago

Answer This Question

See all questions & answers

Samsung - 7.5 Cu. Ft. Stackable Gas Dryer with Sensor Dry - White-Front_Standard

1-1 of 1 Answer

Hi Debs. Thank you for reaching out regarding your Samsung - 7.5 Cu. Ft. Stackable Gas Dryer with Sensor Dry if this model can be fitted with propane. Regarding your concern, yes, this can be fitted with propane. Here are the details you need to consider if you will be using propane. • Use only natural or LP (liquid propane) gases. • The installation must be conformed with local codes, or in the absence of local codes, with the national fuel gas code, ANSI Z223.1/NFPA 54, latest revision(for the UNITED STATES), or with the natural gas and propane installation code, CSA B149.1(for Canada). • Gas dryers are equipped with a burner vent for use with natural gas. If you plan to use your dryer with LP (liquid propane) gas, it must be converted for safe and proper performance by a qualified service technician. (LNG models only) You must check the burner of your model and use the proper LP Kit accordingly. To check the detail information of the burner, open the door and check the rating label location on the door frame. - 20,000 BTU: LPKIT-4/XAA (DC98-04114A) - 22,000 BTU: LPKIT-3/XAA (DC99-00792A) • A 1/2” (1.27 cm) gas supply line is recommended and must be reduced to connect to the 3/8” (1 cm) gas line on your dryer. The National Fuel Gas Code requires that an accessible, approved manual gas shut-off valve be installed within 6” of your dryer. • Gas dryers installed in residential garages must be raised 18 inches (46 cm) above the floor. • Additionally, a 1/8” (0.3 cm) N.P.T. (National Pipe Thread) plugged tapping, accessible for test gauge connection, must be installed immediately upstream of your dryer’s gas supply connection. • Your dryer must be disconnected from the gas supply pipe system during any pressure testing of the system. • Do not reuse old flexible metal gas lines. Flexible gas lines must be designed and certified by the standard for connectors for Gas Appliances, ANSI Z21.24 • CSA 6.10. NOTE • Your dryer uses an automatic ignition system to ignite the burner. There is no constant burning pilot. • Any pipe joint compound used must be resistant to the action of any liquefied petroleum gas. • As a courtesy, most local gas utilities will inspect a gas appliance installation I suggest you check your user manual for further assistance. Here is the link. Please go to page 17. https://downloadcenter.samsung.com/content/UM/202101/20210108102221776/DV6000_DC68-03381W-03_EN_CFR_MES.pdf Should you need more assistance, please feel free to get back to us via the following options: 1. Facebook Messenger: http://m.me/samsungsupport 2. Twitter: https://twitter.com/messages/compose?recipient_id=18768513 3. Samsung Community: https://us.community.samsung.com/t5/Samsung-Community/ct-p/us Thank you for being a valued customer of Samsung. Have a great day. Reference Ticket Number: 1144326739 ^Camille
Answered by Samsung 3 years ago
Sorry, there was a problem. Please try again later.