“I saw on the video where the rowers were finished and began to fold up the extension so they could roll the machine against the wall. But do you have another photo that shows the machine when it is actually completely folded up and against the wall? Thx!”
Answer This Question
1-2 of 2 Answers
Hi Robin, We do have the instructions in our Assembly Manual, page 14 (Moving and Storing the Machine) I will include the instructions below (the manual has photos, I am unable to post on here for reference, sorry). When the machine is not in use, it should be stored in an appropriate space away from foot traffic. To conserve space, fold the Rail Assembly and secure it with the Rail Locking Pin. For safe storage of the machine, remove the batteries. Place the machine in a secure location away from children and pets. 1. Move the Seat to the front of the Rail. 2. Pull the Rail Locking Pin (M) to release and raise the Rail Assembly to the folded position. Make sure that you have a secure grip when raising the Rail Assembly. Stay clear of the movement path of the Rail Assembly. 3. Release the Rail Locking Pin to engage the support tube. Be sure that the Rail Locking Pin is fully engaged. You will hear an audible click when the Rail Locking Pin shifts into the locked position. If it is not fully engaged, injury to the user can occur. M The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you and others are all physically fit and able to move the machine safely. Use proper safety precautions and lifting techniques. 4. Grasp one of the curved Support Plates (J) and the Lift Handle (N). Carefully tilt the machine onto the Transport Rollers (L). 5. Holding the Lift Handle (N), push the machine into position. NOTICE: Be careful when you move the machine. Abrupt motions can affect the computer operation. 6. Carefully lower the machine to the floor and do not let it drop from any height.
Sorry, there was a problem. Please try again later.Hi Robin, We do have the instructions in our Assembly Manual, page 14 (Moving and Storing the Machine) I will include the instructions below (the manual has photos, I am unable to post on here for reference, sorry). When the machine is not in use, it should be stored in an appropriate space away from foot traffic. To conserve space, fold the Rail Assembly and secure it with the Rail Locking Pin. For safe storage of the machine, remove the batteries. Place the machine in a secure location away from children and pets. 1. Move the Seat to the front of the Rail. 2. Pull the Rail Locking Pin (M) to release and raise the Rail Assembly to the folded position. Make sure that you have a secure grip when raising the Rail Assembly. Stay clear of the movement path of the Rail Assembly. 3. Release the Rail Locking Pin to engage the support tube. Be sure that the Rail Locking Pin is fully engaged. You will hear an audible click when the Rail Locking Pin shifts into the locked position. If it is not fully engaged, injury to the user can occur. M The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you and others are all physically fit and able to move the machine safely. Use proper safety precautions and lifting techniques. 4. Grasp one of the curved Support Plates (J) and the Lift Handle (N). Carefully tilt the machine onto the Transport Rollers (L). 5. Holding the Lift Handle (N), push the machine into position. NOTICE: Be careful when you move the machine. Abrupt motions can affect the computer operation. 6. Carefully lower the machine to the floor and do not let it drop from any height.
Sorry, there was a problem. Please try again later.