A:AnswerHi Chris, Good question! Yes, you can. You just have to connect your phone to the receiver via Bluetooth or connect it to the Portable IN jack via 3.5 mm Stereo audio cable (not
supplied). Hope this helps! -Sam
A:AnswerHi Akron80, Thank you for your inquiry. The STRDH190 has a built-in FM radio tuner. But, there is no AM radio. Please refer to this link for the full specifications and features of this receiver.
https://www.sony.com/electronics/support/audio-components-receivers-amplifiers/str-dh190/specifications
Regards,
Sam
A:AnswerHi prof2000, Thank you for your inquiry. Yes, the speaker impedance can be adjusted between 8 ohm and 6 ohm.
“8 OHM”: The default setting. Select
this when you connect all speakers
with a nominal impedance of 8 ohms
or higher
“6 OHM”: Select this when you
connect all speakers with a nominal
impedance of lower than 8 ohms.
Hope this helps! -Sam
A:AnswerYes you can. It won't cause any problems. The receiver will be able to identify that the signal does not need amplification and will not use the internal phono signal amp. You could use the phono input for another component (if you didn't have a turntable), but you cannot customize the label.
A:AnswerHi prof2000, thanks for the inquiry. Yes, the AUDIO INPUT 4 OUT works on all 4 audio inputs so you can record sound from an audio device using the receiver. For more information, please refer to the link below:
https://www.sony.com/electronics/support/res/manuals/4726/f63b8edb2b154409daa55875111f95e4/47269071M.pdf (see page 32)
Regards,
Sam
A:AnswerHi there, thanks for your inquiry. You can connect up to 4 speakers to this stereo receiver. Please make sure that the speakers are within the impedance rating of 6-16 ohms. Hope this helps! -Sam
A:AnswerYes, it did come with the FM antenna. It is easy to miss in the packaging though. It was a thin white insulated wire with one end plugging into the receiver and the other end just free to lay where you want.
A:AnswerHi Phyl, Thank you for your interest in the Sony STRDH190. This receiver has a supplied remote control that you can use to opearate the unit. And yes, you can connect it to your TV via analog audio connection. Hope this helps! -Sam
A:AnswerHi jondy, Thank you for your inquiry. Yes, you will see the volume bar on the front panel display when adjusting the volume. Hope this helps! -Sam
A:AnswerHi Newholland, Thank you for your interest in the STRDH190. Yes, the treble and bass can be adjusted separately. You can use the supplied remote and press the treble +,- and bass +,- button and adjust accordingly. Hope this helps! -Sam
A:AnswerHi PRB, Thank you for your interest in the STRDH190. This receiver is designed to receive a Bluetooth signal from a smartphone or tablet. It is not capable of transmitting one to a Bluetooth device such as Bluetooth headphones or Bluetooth speakers. Hope this helps! -Sam
A:AnswerHi there, Thanks for your inquiry. If you're trying to connect passive speakers to the unit, please make sure that your speakers are within the impedance rating of 6-16 ohms. Hope this helps! -Sam
A:AnswerHi there, Thank you for your inquiry. Did you purchase the STRDH190 model? First, please check if your Polk speakers have an impedance rating within 6 to 16 ohms. Also, make sure it is connected correctly on the speaker ports of the receiver.
If you are unable to resolve your concern, please email us at socialsupport@am.sony.com with the following details:
Name:
Bestbuy Username:
Model Number:
Issue:
Telephone Number:
Additional Information regarding your Sony product:
Sincerely,
Sam
