A:AnswerYou would need to use annalog outputs from your T.V. (RCA Red & White) to one of the 4 different pairs of inputs on the back of the unit. Then just choose the correct inputs from the remote or on the front of the Reciever.
A:AnswerHi there, thank you for your inquiry. Unfortunately, no. The USB port of this receiver is for service purpose only. I'd recommend checking out the STRDN1080 for USB playback option. Hope this helps! -Sam
A:AnswerHi there!
Thank you so much for your inquiry.
If your Bose speakers support a bare wire speaker connection and a nominal impedance of 6 ohms to 16 ohms, yes, it will work with our STRDH190.
For the subwoofer, unfortunately, the STRDH190 doesn't have a MIX / SUB output for the subwoofer connection. The available inputs and outputs on the subwoofer will determine whether or not the subwoofer will be compatible with this receiver.
• Check the subwoofer to determine if it has IN and OUT speaker wire connections. If so, connect the left and right speaker wires from the stereo receiver into the left and right speaker IN on the subwoofer. Then, connect speaker wire from the left and right speaker OUT on the subwoofer to the left and right main speakers.
• If the subwoofer does not have IN and OUT speaker wire connections, then it will not be compatible with the stereo receiver.
We are not sure what brand/model of TV you have. However, if it supports a stereo audio cable audio output connection, you can connect it to the audio input port of the receiver to hear its sound to the connected speakers on the receiver.
ref: https://www.sony.com/electronics/support/res/manuals/4726/f63b8edb2b154409daa55875111f95e4/47269071M.pdf (Pg.16)
I hope you find this information to be helpful!
- Romeo
A:AnswerHi JohnI, thank you for yoru inquiry. Yes, you can. Please make sure to connect speakers with impedances of 6 to 16 ohms. Hope this helps! -Sam
A:AnswerHi Scarab, Yes! You can connect up to 4 speakers to this receiver. Please make sure to connect speakers with impedances of 6 to 16 ohms. Hope this helps! -Sam
A:AnswerHi Mel, Thanks for the inquiry. Yes! You can connect up to 4 speakers to this receiver. Please make sure to connect speakers with impedances of 6 to 16 ohms. Hope this helps! -Sam
A:AnswerYes it just takes all the artificial sound effects and runs it direct through the amp. Great sound that way if you run everything flat like i do.
A:AnswerHi Tassman, thank you for your inquiry. Unfortunately, no. This receiver is designed to receive a Bluetooth signal from a smartphone or tablet. It is not capable of transmitting one to a Bluetooth device such as wireless headphones or speakers. Hope this helps! -Sam
