A:AnswerHi Greg, This receiver doesn't have Sirius as a default app or feature, you'll gonna need a separate device and connect it to this receiver to be able to stream. Link: https://docs.sony.com/release//SPECS/STRDH190_mksp.pdf Thanks, Zac
A:AnswerHi donnoho, when you connect speakers to BOTH the SPEAKERS A and B terminals, connect the
speakers with a nominal impedance of 12 ohms or higher. However, When you connect speakers to EITHER SPEAKERS A or B terminals, connect the speakers with a nominal impedance of 8 ohms or 6 ohms. Thanks! ^Ron
A:AnswerHi Jay, it will depend on the connections required by your mixer. We recommend checking with the manufacturer of your mixer if it can be connected to this receiver. You may use this link for your reference: https://docs.sony.com/release//Manual_4726907111.pdf Thanks, -Mark
A:AnswerYes - It has a separate phono input and several other inputs that would work for a CD player,
And switching between inputs is easy either with the remote control or the input knob on the receiver
A:AnswerHello, pwp3200
This receiver has two zones and can support two speakers per zone for a total of 4 speakers. You may only use wired speakers with this unit, however.
Cheers!
A:AnswerHi Dwane, We're sorry to hear that you're not able to use the receiver because of this message. Kindly check on page 35 of the link below for troubleshooting steps to help isolate the issue (Error messages):
https://docs.sony.com/release//Manual_4726907111.pdf
If still not resolved, you may reach us at [email protected] and include all information such as model/serial no, address and phone number so that we can assist you further.
Regards,
~Ralph
A:AnswerI will answer my own question. The socket into which you plug the antenna turns out to be proprietary. If Sony has extra sockets and antennas available to purchase separately, order some.
A:AnswerHi Basskicker,
Thank you for the inquiry! Depending what ohms your speaker. For reference, with 8 ohm loads, both channels driven, from 20 Hz – 20,000 Hz; rated 90 watts per channel minimum RMS power at stereo mode, with no more than 0.09% total harmonic distortion from 250 milliwatts to rated output.
Enjoy the sweet sound of vinyl, or streaming from your digital music collection. The perfect match for music lovers seeking a stereo system with classic sound from all your music sources. And with the low-profile design, it’s sure to fit into conventional AV cabinets.
-David
A:AnswerHi smokey,
Thank you for the inquiry! Unfortunately, this AV receiver does not support manual tuning for FM. Check that the antennas (aerials) are connected securely. Adjust the antennasn (aerials) if necessary.
Whether you choose to enjoy the warm sound of vinyl via the phono input, or stream music from your digital music collection, you’ve found a perfect match. Don’t forget the receiver’s A=B function lets you connect two pairs of speakers. You can easily switch between A or B or use them all together at the same time. When you factor in the low-profile design, we’re sure you’ve found the flexibility and performance you’ve been looking for!
-David
A:AnswerHi Karl28,
Thank you for the inquiry! Unfortunately, you cannot connect a wireless speaker to this AV receiver.
Enjoy the sweet sound of vinyl, or streaming from your digital music collection. The perfect match for music lovers seeking a stereo system with classic sound from all your music sources. And with the low-profile design, it’s sure to fit into conventional AV cabinets.
-David
