A:AnswerThe KSTK1 Stacking Kit is for all LG machines that are 27” wide. However your washer and dryer are different depths. Your dryer is listed at 30 1/4” and your washer is listed at 29 15/16” ... so it seems your dryer would hang over (extend beyond) your washer a bit. Now if that is at all is an issue that would prevent you from being able to stack them using the KSTK1 may be a question to ask Best Buy Appliance Department.
A:AnswerThe WM4370HWA has the following dimensions: (WxHxD) 27" x 38 11/16" x 29 3/4". The dryer vent duct is 3 5/8" from the base of the dryer. If you are in need of any assistance, have additional questions, or would just like to see our helpful tips, check us out on Twitter @LGUSSupport Facebook https://www.facebook.com/LGUSA/ ^CP
A:AnswerYes, the KSTK1 stacking kit is compatible with the WM1812CW washing machine. If you are in need of any assistance, have additional questions, or would just like to see our helpful tips, check us out on Twitter @LGUSSupport Facebook https://www.facebook.com/LGUSA/ or you can give us a call at 800-243-0000. ^CP
A:AnswerYou will need the stacking kit model KSTK1 for most 27" LG washers and dryers if you are wanting to stack your washer and dryer. If you are in need of any assistance, have additional questions, or would just like to see our helpful tips, check us out on Twitter @LGUSSupport Facebook https://www.facebook.com/LGUSA/ or you can give us a call at 800-243-0000. ^CP
A:AnswerMore than likely. it wil work.
It has to match the dryer feet so ithe bracket needs to be called out as the right one for the dryer. If the old washer dimensions are the same as the new washer ( that would have come with the new dryer if you bought the set) then you’ll be good.
A:AnswerBoth the 27" LG Stacking Kit, Model # KSTK1 and Model # WSTK1 are basically the exact same stacking kit and either is designed for compatibility with LG Front Load Washing Machines and Dryers that have a width of 27". The only difference between the two stacking kits is the color. The "W" in WSTK1 was a white stacking kit which matched white compatible washers and dryers. All the colored stacking kits were replaced by the KSTK1 stacking kit and regardless of which color the washers and dryers are these days, they all use the KSTK1 stacking kit. The "K" in KSTK1 is for Chrome, but when the dryers are stacked onto the washers, you do not see the stacking kit, so the color does not matter...^IFV
