A:AnswerIf you are asking if the disposal hose can go to the drain for it that is 6 1/2 " higher than the machine is, then yes, should be no problem. That's about what mine is and there has been no problem encountered.
A:AnswerThis is what think...
If your handy and can vision / measure the base and as long as the four feet of whatever you want to place on the pedestal lands firmly on to, now you can secure it using the fastener you have.
The key is to make sure all four feet are firmly on the pedestal.
A:AnswerKIKI, this Whirlpool® Washer is compatible with pedestal part numbers XHP1000XW and WFP2715HC. If the pedestal that you have is not one of these, sadly, it will not work.
A:AnswerThis is what think...
If your handy and can vision / measure the base and as long as the four feet of whatever you want to place on the pedestal lands firmly on to, now you can secure it using the fastener you have.
The key is to make sure all four feet are firmly on the pedestal.
A:AnswerHello! We are terribly sorry to hear about your concern. We would recommend contacting Whirlpool® at 800-253-1301. We are available M -F 8 am to 6 pm est. They will be better able to assist you.
A:AnswerHello LBVandal! We would need a model number from your current pedestal to confirm for sure. I can confirm that the pedestal that will fit Washer model WFW6620HC is Pedestal WFP2715HC. If you look at your current pedestal in your home and its model number is this one, then yes it will fit. Otherwise it will not. Hope this helps.
A:AnswerGreat question Heather. We are attaching a link to the use and care guide which should answer all of your questions moving forward. English section starts on page 32.
A:AnswerWe returned three, yes, three versions of this model due to excessive vibrations. This new model was vibrating more than our old Whirlpool duet! Ridiculous. Pure laziness on Whirlpool's part in using bad parts and/or bad engineering.
On the flip side, our current front-load washer has 75% less vibration compared to Whirlpool.
I wouldn't suggest anti-vibration pads as there is risk of the washer coming off it during spin and it would take off the hose from the washer's back leading to your house flooding.
