Customer Ratings & Reviews

If you’re on the fence about getting a 3d printer, get this one. After all the youtube and i ternet of looking for a 3d printer it kept bring me back to this one. The set up was super easy and quick. Right after you just begin printing. And the prints come out amazing. I dont know about other printers but this one just works right out the box. Couldnt be happier with this purchase.

I’ve been using the Bambu Lab P2S and I’m really happy with it. It’s fast, reliable and requires very little tweaking. Auto calibration saves a lot of time and the print quality stays excellent even at high speeds. Overall it feels like a very well designed printer. You just start the print and it works.

The Bambu Labs P2S is absolutely great! Out of the box, after a simple assemble and automatic calibration, I started printing with no effort on my part. The tuning is automatic and the bed leveling is automatic. I just push print and the P2S does the rest. The prints so far are coming out flawless with minimal or no layer lines. If you are looking to get into 3d printing, this thing is a must. It new user friendly and a solid machine.

The Bambu Lab P2S is the ultimate "set it and forget it" machine for daily life. It’s reliable, sleek, and designed to save you time. Why It’s a Great Daily Pick • User-Friendly Screen: The 5-inch touchscreen is intuitive and snappy—no more clicking through clunky menus like on older models.  • Worry-Free Printing: With AI error detection, the printer "watches" itself. If a print fails or a tangle happens, it pauses and alerts your phone so you don't waste filament.  • Quiet & Clean: It’s notably quieter than the P1S, and the new airflow system means you can keep the door closed while printing, keeping your workspace looking tidy and contained. • Fast Color Swaps: If you use the AMS (Automatic Material System), switching between colors or materials is completely hands-off. If you want a printer that feels like a modern appliance rather than a technical project, the P2S is the perfect fit for a busy schedule.

Purchased this printer a month ago. I currently own 4 and this printer is by far the best printer I own. It is fast and easy to use. Prints fast and no issues at all. You can’t go wrong with this one. I will be buying maybe a couple more for my business.

Having years off experience with the 3d printer models of the last 10 years, I thought I was out of the game. I thought I was done. I was tired of misprints, warping, and every other form of disappointment one can achieve through printing with this old dinosaurs. Until I found Bambu Lab printers. I didn’t know exactly how much better the technology became until I purchased the Bambu Lab P2S combo. With everything automatic now, not having to mess with Z offsets and leveling the bed and adhesion, this printer has freed my mind from worry so I can focus on creating/designing/implementing. I will never buy another brand of printer other than Bambu Lab ever again. I’m a lifetime loyalist and would gladly recommend these printers to anyone of any age! If you got out of printing because you got tired of all the hassles, now’s the time to jump back in. All of the Bambu Lab printers have great reviews, but I’d say start with the P2S combo. I never used multicolor before and let me tell you, I was nervous. But again, Bambu Lab’s technology made it virtually impossible to mess up. Hesitate no more. Go get it!!

I have zero experience with 3D printers so I watched a bunch of videos to try and figure out if I wanted to learn something new, and if so, which printer should I invest in. Turns out one of my friends had just purchased the P2S and was printing like crazy. I stopped by his house and got a tour of this printer and what he’s printed and instantly fell in love with the Bambu Lab P2S printer. Of course it was sold out with no date it would be back in stock. I signed up on an app called Trackalacker and put the Best Buy link into the app. A week later, while driving, I got the text it was in stock. Figuring it would sell out immediately, I jumped on the app, added it to my cart and checked out! In less than a minute, it had already sold out. 2 days later, it was delivered. I opened the box, set it up and ran thru the calibrations and was up and running! Luckily i had pre-purchased several spools of filament before the printer arrived as no filament comes with it. Ao far, it’s been flawless! Great prints and so many ideas for future prints. This printer was a perfect choice for being a novice.

This bundle is so good for the price. Hardened nozzle and extruder gear unlike the P1S. The quick swap nozzle is super easy to swap out. Regular maintenance has been painless so far. Bambu Labs Wiki walks you through basically everything as far as maintaining and repairing their printers. The print quality with the P2S has been great. Ive yet to have a failed print in over a month. The AMS 2 Pro is great, it also doubles as a dryer unlike the original AMS system. I wouldnt hesitate to purchase this combo again. Theres also a ton of accessories and prints for the unit because of the popularity.

I highly recommend this pri ter I had a creality ender3 and there is no comparison, this printer worls rught out of the box, amd keeps on working, I have only had it about a monthand had the ender several years, ive printed more in a month. If youre in the market, get this printer!! You wont be sorry! I would equate how it feels to the discovery of Fire !! Or Air Conditioning!! It is that good. Its packaged well, quick swtup and calibration and you're off. Using the mobile app or bambu studio, there are thousands and thousands of files on Makerworld, so many there is ssomething for everyone. I couldn't be happier with the purchase, it has been running non stop!!

I am new to 3-D printing. This model is extremely easy to set up straightforward right out of the box! I did a purchase and then picks up at the store. Customer service was very friendly, helpful, and knowledgeable. I have purchased two more printers because of the ease and beginner, friendly approachability of this printer highly recommend!!!

Thus is my 2nd 3d printer and wow have they improved in everyway over the last 4 years! So more reliable, faster, easier to setup and maintain! I am beyond happy with this purchase! The fact that i was able to get it though best buy with Total warranty protection it was an easy decision! I definitely recommend!

First 3d printer I’ve owned, have close to 200 hours on it and this thing is flawless! Easy to unbox/set up and super user friendly. I highly recommend Bambu products and rate this specific model a 10 out of ten!!!

I’ve had this printer for the last month now, it works like a charm! It’s capable of printing nearly silent on quiet mode and offers a simple and easy nozzle swap method (only comes with the .4mm). Make sure to read the instructions on how to pull the AMS outside of the printer (it’s inside during shipping). It can handle some table shake to an extent that I’ve noted so far. It doesn’t come with filament so I would say buy some alongside it. I recommend Overture Strong PLA to get started on projects as it’s very resilient.

3D printing sure has come a long way, I remember when they seemed extremely difficult and for the most niche of nerds but today bamboo has made so me it many advancements and honestly it's just easy. The fact that the community itself has provided so many improvements for any issue you may have with the printer is astonishing. They Really have an amazing ecosystem. If I were to give it a ding it would just be or how slow it is because it is a single nozzle but for as far as a synchronizer goes this is still incredible.

This printer is a solid workhorse! It's incredibly reliable and user-friendly—153 hours of printing so far with no issues whatsoever. The onboard display is super intuitive and walks you through everything from prep to printing to troubleshooting. The fact that I can send and start projects remotely is a fantastic bonus

My daughter wanted a 3D printer, so I did a lot of research and we ended up with this one. Setup was smooth with the video and we were printing within 1 hour. Total newbies and it has been running everyday since! Already wanting to add another one!

What an amazing machine. The quality and build of this printer is amazing. Doesn’t feel cheap in anyways. Sure u can spend more money and get bigger / professional grade printed for thousands more or u can go with this amazing workhorse. Bambu lab hit this one out of the park. Let me tell u how bambu is as a company. People who bought this model end of 2025 didn’t have a rear exhaust like the models produced in 2026 do. What does Bambu do…. They offer to sell u the upgraded exhaust fan kit for only $20 shipped directly to u AND they went a step further and are giving away the updated rear panel for free. So would would normally cost u over a $100 is only $20. Now mine came with the updated rear panel so I was lucky. But still. Now since mid February I have used this printer (p2s) without a single issue (that wasn’t my fault) and have over 200 prints and well over a 1000 hours already. I’ve made anything from clickers, household upgrades and needs, figurines and decorations for my wife and even RC car parts and accessories that have basically paid for the printer. It’s my first 3d printer so I am new, although I have an engineering background it made it even easier and have moved onto designing my own items, Bambu studio makes everything so freaking easy. What u can’t learn from YouTube, just ask chatgbt and she/he it will help u out in no time. Honestly, I’m having such a blast with this thing.

Made lots of cool prints and very happy with the ease of use. I have a different 3d printer that is older and a lot more work. This one you just edit the model out design the model and hit send a couple hrs later you can go use it!!

Purchased this to explore 3D printing, and the ease of use has been impressive. The ecosystem has made printing a wide variety of projects straightforward and reliable. Most of the print issues I’ve experienced have come down to the quality of the downloaded files rather than the printer itself. I’ve only had one real “spaghetti” incident so far, which was resolved by cleaning the print bed and re-downloading the file. It was not a printer issue, and the unit has been running great. I try to keep the printer running anytime I’m home. The app works extremely well, and the built-in camera feature makes it easy to monitor prints remotely from another room without constantly checking on the machine. The next step is exploring my own designs and printing products for commercial use, along with potentially purchasing a second unit in the future. This is my first 3D printer, and so far I’ve been extremely pleased with the experience. Very happy overall.

I am blown away at how easy this printer is. You pick a model from the catalogue, press ”download” and that’s it. You can even do it all from your smart phone. It’s truly amazing! The printer handles all the complicated stuff for you, calibrating, leveling, switching the filament for multi-color models. The printer even has a built-in camera so you can watch the progress from your phone. I haven’t had one bad print yet! I highly recommend this 3D printer!!!