Customer Ratings & Reviews

This is an extremely fun and easy to use printer. The fun begins fresh out of the box. Easy setup and perfect with the AMS. As a beginner to 3d printing I have really been enjoying it and doing new projects!

This is a great printer. I am just starting out and find the interface super easy to use. The learning curve was very small with this machine. Highly recommend.

Excellent shipping time and quality on this product. I love this printer, high quality BambuLab/MakerWorld prints. I didn't have any issues with delivery or set up and was printing within half an hour of delivery. Came with the AMS, which is very easy to use and great for filament drying and for multicolor prints.

Printer is amazing. If you want a printer that just does it's job, this is it. Printer is straight forward and intuitive. If it's not cooperating, just look up whats wrong. Bambu has a great troubleshooting guide. Every issue I've encountered (all small) has been solved easily by me.

I have been waiting 2 months for this product to be released. From the time arriving through setup and calibration, I was printing quality items within an hour. The simplicity of 3D printing has come along way over the last 6-7 years. I would recommend the brand and this product to anyone considering getting into 3D FDM printing. It is in the mid price range of printers but offers some great perks such as multi-color prints with a variety of material types-PLA, Petg, ABS, and engineered filaments. This is a great printer for you and your family.

Completely entrenched in this printer Easy set up, and printing the same day with absolutely no previous knowledge. Bambu makes it look easy. Remember too order filament and your set Highly recommend PLA basic filament

I fought with my Ender 3 for many years and finally gave up!! I purchased a P2S and out of the 100 plus prints in the 1st month I have only had 1 failed print of 3mm bolt 30mm tall and after I added a platform it printed fine. I did not think I needed the AMS but I found within a week that use it all the time for different projects. Another fact is that the P2S prints faster and better. The Ender 3 would take 36 hours to print and the P2S takes just a bit over 3 hours for the same part and the Ender 3 would leave a poor finish and the P2S would be almost perfect. The Ender 3 would elephant foot and string and I have no issues with that with the P2S. The Ender 3 base plate was so poor that I had to use a raft to have the print stick and with the P2S I print directly on the standard P2S baseplate. My only issue was getting Bambu Studio to print directly to the P2S. After 2 weeks of tweaking I found the the P2S has an FTP issue that will drop the connection if there is a missed packet so I tested and changed the access point and now it works great!! In 6 weeks I have only used 7 rolls of PLA so the P2S is just a hobby. I would recommend the P2S 3d printer.

I bought a P1S in December, and it wasnt long after I bought the P2S. I have to say, my P1S prints lightboxes better. Maybe its because it's textured plate has slightly less texture. But other than that this thing does a fantastic job! I have had zero failed prints so far (knock on wood), and it prints very clean. I kinda wish I had jumped to the H series instead of this one for the build volume, but that is definitely next on the list. Lots of folks complain about Bambu, but they are just solid machines you can count on! That's exactly what I needed....something to make my ideas come to life, rather than something to work on (though I did have a clog in my P1S after 500 hrs) The hardened steel parts, Ams pro with dryer, & touch screen, are the main upgrades over the P1S. If those are not important, get the P1S and save $250. You can't go wrong with either of them, and pretty much anything bambu from what I have read/researched. Happy Printing!

Been using this printer for 2 months and it's been doing great! Very beginner friendly, the quality of the prints has also been outstanding. This is my first time getting into 3d printing and I haven't had any complaints so far. Bambu support has been very helpful as well whenever I've been running into issues with my prints/printer

I have wanted a 3D printer for a few years, but I’ve been nervous because I’m not super tech-savvy. Bought this printer, and it was as simple as following directions to set it up pressing print and watching it go! I love that I can easily plug and go, but there is also SO much I can learn and figure out how to do. So you don’t have to know what you’re doing to use this printer. It is very simple to learn as you go. If there are any notifications that come up, it explains what they are in simple terms. They have a great first learning “course” you can read. I would definitely recommend this printer for anybody in the market for a 3D printer. I also love the fact that it has a camera inside of it, so if you’re not home.. you can watch what is happening! 100% I would buy again. The only problem I’ve had with this printer, is that I want to buy another one.

Been using it almost nonstop and it works great! Wish it came with the hardened steel nozzle though

Easy setup and perfect 3D prints right out of the box. Couldn’t be easier to get started and have excellent results compared to my 5 year old printer technology. Love the Bambu Handy app which allows me to start, stop and view my print from anywhere! Definitely, will be adding another to my printing bench. Be sure and get the Combo so you have the AMS2 Pro filament feed which opens up another multi-color printing convenience. A+++++

As a technophile, I've been looking to get into 3D printing for both myself and because I have young children. My wife and friends have been urging me to check it out but I just didn't feel like I was ready because of various issues I considered deal-breakers. Then one friend told me to check out Bambu Labs, as they fixed all the hacks and compromises that had me hesitating and here we are. I actually almost impulse bought the X1C when it went on flash sale here, but then I saw rumors of the new P2S set to launch any day that basically fixed all the minor issues with the X1C that were also upgrades for the P1S. Needless to say, I'm glad I waited and for the price, I'm absolutely blown away by the quality of prints and the ease of use. If you've used any moderately complex software, you'll have no problems at all using Bambu Studio to make minor edits and changes to prints but realistically you won't have to change much at all other than set the filament colors from your AMS2 Pro. The AMS2 Pro is one of the major benefits of this package, as it increases your multi-color printing capabilities to the 4 in the AMS to the 1 on the side. I actually added a 2nd AMS2 Pro, which can be done with no additional hardware with the P2S, that gives me 8 total colors by giving up the side feed. This really opens up the ability to do multi-color prints with ease, as the P2S and Bambu Studio automatically handle swapping and purging the filament for you allowing you to just wait for the total print to finish. You just need to load and dry your filament in the AMS before starting the print. That's the other major benefit of the AMS2 Pro, it will dry your filament by heating and removing moisture, which is very important for quality printing especially with certain materials like PETG. Wet/humid filament will have more trouble sticking, extruding uniformly or keeping form while printing. Get ready to learn about silica gel and humidity. Even if you use more colors than your AMS2 Pro can hold, you can change mid-print too, but obviously that means you have to keep an eye on the printer and slowing down the print if it stops before you swap filaments. The traditional method of printing was to use monofilament and then paint the resulting models and prints, which is its own hobby, but for now it is just more efficient and more fun for me and my kids to just do the multi-color prints. The only downside of multi-color prints is that you do use a lot more filament as the hot end will waste some filament to purge the old color while the new color is primed so that you don't get a color mix or bleed. The way to counter this is to do multiple prints if possible, instead of just 1 print at a time so that the amount of purge is fixed and reduced by N number of prints. The next level comes with the H2C, which uses the Vortek 6 head system which swaps the actual hot-ends so that there is no purge waste and allows you to print with 6 different colors at once. This might be my only regret, that I didn't just take the plunge and go right for the H2C, which is also larger along with the ability to print multiple colors, faster and with less waste. There is very little learning curve when printing with PLA, but using different filaments do require additional research and can be more difficult to work with. I have printed with PETG as well and it is a little bit more finicky. There's also TPU and ABS for more durable prints, but you will want to be aware those latter two can have fumes that you will want to make sure you have good ventilation. One of the biggest benefits of this 3D Printer however, is that it is a great way for me to spend time and bond with my young children. They are fascinated by this little machine that prints awesome pop toys for them and their friends so it is a STEM gateway for them while I get to spend time with them picking and choosing what to print next. I haven't stopped printing on this thing since I set it up 2 weeks ago!!! The next step will be to design and modify some prints and eventually, I'll get to print some of the things I wanted to print for myself, like power tool holders, brackets, various other things like that. Until then we'll be printing Christmas articulating snowmen for kids friends and teachers, Kpop toys, articulating dragons, all the cool stuff that impresses the kids and their parents too. I did go ahead and spend a few hundred on filament in multiple colors, and the results so far have been amazing. Definitely looking to grab that H2C or its successor at some point but no regrets taking the plunge with this P2S, and judging by some of the hobbyists I've seen, this is pretty normal as the only bottleneck to creativity is how fast and how much you can print at once. I've just scratched the surface, but I am enjoying my 2 week crash course on 3D Printing so far!!!

Love this thing. Price was best I could find delivered (and quickly). Definitely satisfied with the purchase and the purchase experience. Best buy for the win. We've got 140hrs so far and its not missed a lick. PLA, PLA 2.0+, PETG. Not a problem. Great packaging and easy setup to print in around an hour pending calibration.

The Bambu Lab P2S has delivered unmatched speed and reliability for a plug-and-play 3D printing experience. Its robust build quality and intuitive software make it a top-tier choice for me. While the proprietary parts can be pricey, the consistent print quality justifies the investment every time. I give this machine a 5-star rating.

The speed of this unit is incredible, but the reliability is what really stands out. Setup was seamless...essentially plug-and-play. The AMS system handles multi-color prints with zero downtime, making it feel more like a precision tool than a hobbyist machine. It’s the 'set it and forget it' experience I've been looking for.

Truly a plug and play experience. Unboxing and setup took no more than 15 minutes, then the printer completely calibrated itself and we started printing. Almost 1000 print hours and s little over 1 month later and it hasn't skipped a beat.

I've been watching this model since its first announcement. I saw it sell in other countries first, but I guess P2S was waiting for the H2S announcement in the United States. Anyway, I'm very curious about the price because it's an upgrade from the P1S. From my understanding, it uses the latest nozzle—the same one used on the H2D—which allows 30-second nozzle swaps. This is a huge upgrade for me in a single-nozzle system. Besides other upgrades that make me think it is even better than the X1C. I've tried various printing tasks with it and haven't had any issues, except occasionally when printing ASA with a 0.2mm nozzle. I've seen others have similar issues, and it might be the nature of the nozzle that makes printing ASA with a 0.2mm nozzle nearly impossible. However, ASA is the most challenging printing material I've ever used. The self-maintenance and debugging manual is pretty clear. (I was really harsh on this printer—I basically disassembled the entire extruder module to fix an ASA filament jam on the third day I had the printer.) I was able to fix the issue easily by following the steps, but as a 3D printer owner, you need some level of hands-on ability, right? Overall, it's pretty reliable. $850 for the AMS2 Pro + P2S printer combo is a steal compared to $550 for the AMS + P1S combo. You can expect about 99% of your prints to be handled successfully by this machine.

AMAZING! I upgraded from a BambuLab A1 to the P2S and I’m so happy with the decision. It’s been running non stop for the last 2 weeks. It’s user friendly and ready to print after about 10-15 minutes of setup. GET YOU ONE!!!!

The printer is quite beautiful and very feature-rich; it is fast, and what impresses me most is the possibility of automatic filament changes.