Customer Ratings & Reviews

Printed right out of the box and the AMS has been pretty awesome. I only had one failed print from a model with low contact points with the bed. I also had a snag with something to do with one of my cardboard spools not rewinding correctly, but the print resumed perfectly fine. This setup does make me want a 2nd AMS! Printing from the phone is a nice bonus, but really it’s best for monitoring prints when I’m not at the computer. I print in my around-freezing garage and the printer doesn’t seem to care at all. PLA and PETG prints have all come out great. I upgraded from a CR-10 S Pro, and a Prusa Mk3S. I’ll be keeping the Prusa because that thing is rock solid, but the CR-10 will probably get sold due to it not having an enclosure.

I am very very impressed with the quality of this and the overall build. The ability with the ams pro 2 to dry the filament makes sure that all my prints come out better. I've done quite a few tests with the speedier prints and many of them have turned out so good. I did put a 2 inch foam on my table and then a 16x16 concrete paver on top of that underneath the machine. That helped quite a bit with overall sound. I can highly recommend this printer. It's super beginner friendly and just works.

Owning 3 H2Ses and 2 P1Ses, I am very familiar with Bambu Lab quaity. I knew this would be a solid printer, but I’m honestly blown away. I love my P1Ses but now find myself wishing I could upgrade them to P2Ses. The quick swap nozzles, better camera, and touch screen are all very nice, but there’s so much more. This machine feels premium. Very happy with my purchase and will likely add another in the not too distant future.

I have over 100 hours on it- it has worked great so far- a few failed prints but nothing serious. The machine was easy to set uo and start printing right away. I bought it wanted to make custom parts for my Jeep and motorcycle for filming, radios etc. love it so far. Ive had it about a month.

Excellent 3D printer. Extremely easy to setup and use with minimal troubleshooting. It has made some of the best 3d prints I have ever done with no modifications. Highly recommend going through Bambu's beginner tutorial to learn the ins and outs of the printer.

I have been extremely pleased with this purchase. I have used other 3D printers and found them to be quite finicky. The P2S AMS 2 Pro combo worked right out of the box. It has been running almost non stop since I set it up.

I am new to 3D printing and I got it going right out of the box. Everything I have made was on makerworld.com. I have had 0 failures so far. I did a lot of research before hand and am glad I bought the P2S Combo

The P2S is what the X1C is but upgraded. It has a beautiful screen, upgraded AMS, and other useful features that help the quality of life. if you can afford this one over the P1S, but it!

The Bambu Lab P2S takes everything I liked about the P1S and refines it into a truly premium printing experience. Setup is straightforward, but what really stands out is how effortlessly it produces high-quality prints at incredible speeds. The upgraded features—like improved cooling, better vibration compensation, and more reliable auto-calibration—make prints even cleaner and more consistent. Paired with the AMS, multi-color printing is shockingly simple and works with minimal tweaking. It feels like a professional machine right out of the box but still remains approachable for users who are upgrading from an entry-level printer. Day-to-day use has been smooth and surprisingly low-maintenance. Plate alignment and nozzle changes, which were minor pain points on the P1S, feel noticeably improved here. The enclosure helps with temperature stability, giving great results with PLA and PETG. Long prints run quietly, reliably, and without the random quirks you get from cheaper printers. If you're looking for a printer that’s fast, accurate, and dependable, the P2S delivers well above its price point. A fantastic upgrade over the P1S—faster, cleaner, and more refined in almost every way.

This purchased for my kid for christmas. She absolutely loves it. She prints something everyday. The setup was so easy. Definitely recommend

The printer was so easy to set uo compared to my creality 5s plus. And this one prints! Over 300 hours printing and no mess ups.

I have to say the rating is for the printer, because I really like it, it's been just abort flawless thus far. However, 1 star if I was rating BB, reasons in the review. Our first venture into the 3D world. We've researched and Bambu stands out as pretty much fool proof. Bambu provides plenty of learning avenues, unpacking, startup guide and videos. It's amazing what these things can do! Not only for toys but useful items used around the house can be 3D printed. The P2S combo comes with the AMS2Pro holding 4 spools of filament. With additional AMS units/accessories it's possible to print with up to 20 colors. The AMS2Pro is also capable of filament drying as a separate operation and not at the same time as printing. Only 2 negative things I've found at this point is the PTFE tube that carries the filament to the print head rubs on the bottom side of the top glass cover. 3D parts/accessories can be printed to remedy this. The other is there is no filament supplied with the printer, not even a small amount to print a test item after calibration. Beyond those two minor things, the printer has been great and we'll above our expectations. But, we are 3D novices. The sad part is, BB doesn't stock or carry a wide assortment of filament, parts and supplies for 3D printing. I'm sure BB's analytics show 3d printers have been selling out as soon as they arrive. It would seem that a logical step would be for BB to carry 3D consumables and accessories like an assortment of filament and colors and things like filament dryers. Assortment means a variety of filament types, not just PLA. The crazy thing is not all BB stores carry even the smallest amount of filament. As mentioned, you also need to carry hot ends, build plates, lubricants - the consumables - things needed to keep the printer running and printing! Some people have multiple printers and they run constantly. If they run out of filament during a print or need a replacement hot end what do they do? Have spares on hand of course, but not always. They can order online, but wouldn't it be nice to basically run around the corner to a BB? Except BB doesn't have it or carry it. Yes they can be ordered through BB, but why when there is Amazon. I'm sure Amazon sales thank you BB! So, 5 stars for the machine and 1 star for Best Buy management.

Amazing printer. I went from an ender 3 and this is a massive upgrade. Everything works perfect out of the box. Next to no effort to set up other than removing packaging.

This printer is absolutely the best printer I have yet owned. I have had 0 issues and it seems faster than the P1S.

This printer is awesome. It's fast and it just works out of the box, no messing around. Better prints than the X1C IMHO.

I loved my p1s. Then I got the x1c. I thought it was an upgrade to the p1s adn it was... But i had more issues with it than the p1s. The p2s is BETTER than the x1c for real! I think i am finally happy. best buy was the perfect place to order this. The day of release, I got it the very next day overnight. Best buy is local whereas bambu you have to ship for any issues. Also, 60 return and price protection for plus members. I have purchased so many printers and this was an easy unboxing and more.

I upgraded my 3d printer from a Bambu labs A1 to the P2S with the AMS pro and j love it, I’ve printed with both PLA and PETG at this time with only great results and no problems at all. Made a bunch of Christmas gifts and organized a drawer with Gridfinity modules. I plan to upgrade the printer with a Bambu external venting system as soon as it is available so I can experiment with ABS as well .

Easy to use and set up instructions very clear was up and printing within an hour

I was looking for a Christmas gift and first ordered the P1S Combo because it seemed like such a great deal, but then I saw the P2S for about $250 more and decided to take the plunge and future-proof my purchase by buying the P2S instead. So glad I did. I've heard great things about the P1S, so this isn't a knock against that model, it's just that the few complaints that I did read about the P1S all seem to have been addressed in the P2S, along with some other upgrades (better camera, spool placement, more accessible tube detachment, etc...) that justify the $250 difference in my mind. The only issue that I've ha so far is trying to print with PETG off the auxiliary spool, but I'm new to 3D printing so I'm going to keep working at it and see if there's just a setting I need to adjust. Bottom line- if you're on the fence about the 2 printers- either is a great purchase, but if you have the money (and Best Buy has them in stock) I say get the P2S.

Overall a good printer but had issues with heatbed abnormal temperatures from day one. Returned it