Customer Ratings & Reviews

Hello, DrLeo470. Thank you for taking the time to leave a review on the Blink Outdoor 4 wireless camera system. I am sorry to hear about the lag you are experiencing with the device. I have some recommendations to try and help with the issue. I recommend checking for app updates and checking your internet connection. Unstable or weak internet connectivity can affect the app's performance. Also, I recommend checking to ensure the sync module has a good connection to both the cameras and Wi-Fi. I hope this information is helpful, and if you have any questions, I recommend reaching out to Blink Customer Support at 1-833-392-5465. Thank you again, have a great day!

Hello, and thank you for your feedback on the Blink Outdoor 4 camera. We're sorry to hear about the connectivity issues you've been experiencing between the camera and the Sync Module, and we understand how frustrating that can be when the device isn't performing as expected.

The Blink Outdoor 4 is a wire-free camera that communicates with the Sync Module over a wireless connection, and a strong, stable Wi-Fi network is essential for reliable performance. There are several troubleshooting steps that may help resolve the connection issue. First, make sure the Sync Module is placed in a central location within your home, ideally near your Wi-Fi router, as the Sync Module needs a strong connection to your router before it can reliably communicate with the camera. The camera should be placed within approximately 100 feet of the Sync Module, though walls, floors, and other obstacles can reduce that effective range. If the camera is mounted far from the Sync Module or separated by thick walls, try repositioning the Sync Module closer to where the camera is installed, rather than moving the camera closer to the Sync Module.

Additionally, check your Wi-Fi network to ensure it is operating on a 2.4 GHz band, as Blink devices connect exclusively to 2.4 GHz networks and will not connect to 5 GHz bands. A minimum upload speed of at least 2 Mbps is recommended for each camera to function properly. If multiple devices in your home are competing for bandwidth, this can impact the camera's ability to maintain a stable connection. Try temporarily disconnecting other devices from your network to see if the connection improves. Restarting your router and the Sync Module by unplugging them for about 30 seconds and then plugging them back in can also help clear any temporary connectivity issues. If the Sync Module's LED light is not showing a solid blue and green light, this indicates it is not properly connected to your network and may need to be re-added through the Blink app.

If none of these steps resolve the issue, try removing the camera from the Blink app and re-adding it by following the in-app setup process again. You can also reset the Sync Module by pressing the reset button on the side of the device with a thin object like a paperclip, holding it until the light turns red, and then setting it up again through the app. If you continue to experience connectivity problems after trying all of these steps, Amazon Customer Service is available 24/7 at 1-888-280-4331 for further assistance. We want to make sure your Blink Outdoor 4 is working reliably for you. Thank you!