Customer Ratings & Reviews

The great thing about this case is it can fit all of the bigger cards. It is easy to install the motherboard and leaves plenty of room for cabling & extra fans. I took some measurements and it could fit a RTX 4070.

Great air flow and I love the design. Easy to use. It should have RGB at this price but not something I really car about. Build quality is great. Fans run quiet. Both side panels are removable. I read they are interchangeably but I haven't tried that yet. Highly recommended.

I was looking to upgrade a Corsair 22OT Airflow case to better fit some of the bigger GeForce RTX 30 series graphics cards which were just announced. This case was exactly what I was looking for. It has just a little more room where I needed it while still offering ample air flow in a midtower package. It has the quality and ingenuity I've come to expect from Corsair.

Nice looking case with good airflow and room in it

Was what we were looking for and more. Ample space with a separate area for the power source love the entrance on both sides are easy to open in 1 side 2 thread cords. Would have liked to have had one more fan included but the 3 cos I'll add another do to its space to do so.

This is a great case with plenty of airflow. Its very easy to build inside the case as it has plenty of room and is very functional. Cable management is not the greatest but is still very good. There is a lot of flexibility in the case to build it how you want. I wish there were an extra USB-A connection on the front panel but that is my only complaint. All around a great case.

Lotsa room in this cabinet, you can see eveything, disapates heat. Well

A quality, mid-priced and easy case. It's made well and has plenty of ventilation. If you are looking for a minimalist/basic/practical case that doesn't have 384 different RGB elements but that's also of a good quality and design, you can't go wrong here. And just in case you do have a lot of lighting and hardware to show off, the side is transparent tempered glass but slightly opaque and darkened. The yellow accents are pretty cool and the screws and mating points throughout the case are well made and fit together well. Definitely among the best cases I've used in terms of build quality. Only slight issue is that if you have a long PSU then you'll have a hard time installing and removing 3.5 in HDDs because the cordage from your PSU will be rubbing right against the drive cage. You have to disconnect the PSU, all of the cords, and then remove the cage. Very minor issue but something to consider. Regular sized PSUs seem unaffected by this issue. And I only use my old mechanical drives for storage and backup so if you are an SSD only user then there should be no issue there at all. If you don't want or need a fancy case then this is a great option. You do not sacrifice any quality or usability here. Take that money you save and get a better CPU/GPU etc...

This case looks pretty good but it could use some improvements. First of all, it only comes with two 3-pin stock fans, so if you are looking to buy this case make sure you look for some fans as well. Second, the side panel is black tinted glass so you can only see the rgb inside of the pc; you can’t see the spots that are not lit up. Third, you cannot mount a 280mm AIO or a 360mm AIO at the TOP of the case, unless you have low profile ram. The G skill trident Z ram does fit with a 280 or 360mm AIO but the Corsair vengance ram does not fit. However in the 5000 series Corsair cases, you are able to top mount any sized AIOs without clearance issues. If this case wasn’t tinted I would love it so much mote. The tint in my preference does not look good, but if you think it does look good go ahead and buy this case.

Great airflow and easy to build in. Fits my 280mm rad, 2 gpus, and more.

This is a great case! So easy to build in, and everything is incredibly organized. I think the most important feature though is the thermals of this case. The case is designed for breathability which keeps all your components very cool. I did have an issue with the fan sucking the front mesh into it and creating a really annoying noise, but I removed the mesh and put it back a few different times and somehow it went away.

Wish the case was a bit wider so you could fit better and bigger airflow cpu coolers like the the bequiet or Noctua HD-15. It is capable of a 360 aio in the front or 250 aio on top. Can handle triple fan graphics cards with some wiggle room. I think I'm just spoiled with the 5000D airflow i have fore my personal rig. So it could taint my perspective a bit. But its very beautiful. Easy to work in. Corsair makes pretty good cases. Can fit up to 6 fans. Although i think 5 fans is more optimal considering one fan wont really be blow across your part. I used this case to build my dads pc.

Amazing case, I build PCs and sell them online as a hobby and was incredibly impressed with the simplicity of the design and the ease to build in.

It is very spacious with easy cable management. It provides great airflow.

I used this case for my first ever PC build. It was very roomy and easy to work with. Different components remove or slide around easily, making it simple to adjust it to your needs. The dust filters are easy to remove and clean, making this a perfect case for a dusty environment. The two included fans are ok and get the job done, but I did supplement them with a couple aftermarket fans to help cool my components.

Love this case so much I put my 2nd build in the same black airflow looks amazing awesome temp very highly quality materials and build. The smaller size gives it much more modern look than the 5000 and wayless wasted space some corners are tight but I found it fine to work in. I recommend Corsair RGB fans they look amazing worth every penny I spend half my day memorized.

Very cool, has dust shields on the top, bottom and front of the pc, so it keeps the pc clean. Good amount of space, and fans are visible in the front, overall it’s a great pc case,

Great case! Nicely packaged and exactly what was expected. With all cases be careful with the tempered glass any small corner ding and it’s a goner. Coming from experience :(

This was my first time doing a case swap and i love how much more space and air flow this case had compared to my HP omen. It also has some cool features and great cable management options. It also has alot of room for additional fans. I added 3 RGB fans to the front with ease and one more fan at the top of the case.

Great case for my massive computer I'm very pleased with it