Customer Ratings & Reviews

Hi BryanS. Thank you for your feedback on the eero 6 system. I’m sorry to hear about your signal drops. Soft resetting your gateway eero (the one connected to your modem) can be a useful troubleshooting step. To soft reset your eero: Hold the reset button until its LED flashes yellow (approximately 7 seconds). Once it flashes yellow, release it. As the eero boots up, the LED will flash white, then blue, and then return to solid white. Once the LED is solid white, you should be able to see your eero is back online in the eero app. If you still experience connection drops, take note of the time of the drop and reach out to customer service so that they can troubleshoot further. They can be reached at (877) 659-2347. I hope this helps. Have a great day!

Thank you for your feedback on the eero 6 2-pack. I am sorry to hear about the issues you are experiencing with the range of the eero devices. You may need a 3rd eero to help with the range issues. Here are a few tips to help address range issues: 1. Place eeros where they can talk to each other. While it might be tempting to place your eero in an existing dead zone or area with poor WiFi connectivity, it’s much more effective to place eeros halfway between your gateway eero and your existing dead zones. This way, your eeros can get a strong WiFi signal from your gateway eero and broadcast that signal into your former dead zones. You can think of placing them like a WiFi relay – each eero is a link in the chain bringing WiFi to your dead spot. 2. Place eeros on a hard, flat surface. Your eeros should be placed on a surface that is both stable and flat, such as tables, countertops, and nightstands. 3. Aim high. eeros radiate their signal more upwards than downwards, but mostly along the plane they’re placed on. It’s best to place your eeros at a height halfway between the floor and the ceiling, not on the ground. 4. Keep your space open. eeros communicate best when they’re not closed in. Keep them out in the open – try not to place your eero(s) inside a media console or cabinet. 5. The thinner the barrier, the better. The fewer the walls (and the less substantial their inner material) between your eeros, the better your performance will be. Older houses with dense materials like plaster, lath, or chicken wire in the walls are particularly hard for WiFi waves. Placing your eeros near doors may help since wood is less dense and easier for WiFi waves to penetrate. Whenever possible, aim for direct line of sight between eeros. Here are some things to avoid: 1. Heavy metal. Stream as much Motörhead as you can stand, as long as you don’t put your eero(s) near your refrigerator or other heavy metal objects. These objects can interfere with wireless radios. If you’re placing an eero in the kitchen, we suggest placing it on a counter or shelf that’s as far from your major appliances as possible. 2. Interference. eeros work best when they’re 20-30 feet away from objects that cause interference. 3. Avoid placing your eero on top of, or near, these objects: Microwave oven, Cordless phones (for your landline, not your cell phone) that use the 2.4GHz or 5GHz range. If these cause interference, try changing the channel your phone uses. WiMAX, Other 802.11 networks, power lines, power stations, or railroad tracks, radio leakage from Direct Satellite Service (DSS), older coaxial cable from certain types of satellite dishes. If you have an older satellite dish, contact the device manufacturer to get newer cables, fluorescent lights, bad electrical connections, radar. 4. Smothering your eeros. Keep your eeros out in the open and never put anything on top of them. When possible, also avoid having your eeros enclosed in a small space. 5. Soft surfaces. Your eeros work best on a stable surface, so avoid putting them on chairs, cushions, and any other surface that doesn't allow for space beneath them to breathe. If these tips don't help with your range, contact eero support at 877-659-2347. They are available to help Monday - Sunday 6am - 8pm PT. I hope this information helps, have a great day!

Hello, MaryannT. I'm sorry to hear about the issue you are having with your Eero 6 3-pack. If you have performance issues with the mesh system I recommend power cycling. You can power cycle the system by unplugging the power cable from the back of your eero, waiting 30 seconds, and plugging it back in. This step can sometimes fix connectivity issues. The eero’s LED will turn solid white, then be flashing white while booting up. It takes about a minute to start up and begin broadcasting. You’ll know when the cycle completes because the eero’s LED will go solid white again. I also recommend going into the Eero app and ensuring all devices have a strong connection to one another and placing them where the connection is the strongest. If this information does not resolve your issue, please reach out directly to eero customer support at (877) 659-2347. Thank you and have a great day!

Hello JessicaB, the eero 6 AX1800 Dual-Band Mesh Wi-Fi 6 System (3-pack) is designed to cover up to up to 4,500 sq. ft. It is recommended to use the eero app to guide you on placement to maximize your eero 6 AX1800 Dual-Band Mesh Wi-Fi 6 System (3-pack). The app will walk you step by step for the placement and will tell you if you have place your unit in a place where it is not favorable to maximize it. Hope this can help you and having a better experience with your eero 6 AX1800 Dual-Band Mesh Wi-Fi 6 System (3-pack). Have an amazing day!