Customer Ratings & Reviews

Love the color and look! Way more space to work with and still have plenty room and slots to add more components in the future.

Perfect for a build. Easy S tier for aesthetics. Super easy to build upon, as well. Plenty of space for cable management and components. Would highly recommend. Also huge win for vertical GPU mount

Its a great cade to work with that has plenty of cable management space for your build. Best thing to do will be to replace the fans it comes with since they are 3 pin and will be a little noisy.

I wanted to redesign and upgrade my secondary PC which my daughter uses for gaming so I decided to build out an all AMD rig with a vertical mount so she could play Hogwarts at max settings at 1440p. After much research, I settled on the Hyte Y40. It has turned out to be a decent case but with a few problems. Material quality is definitely a step above average and the case itself is very sturdy. Building in it is pretty easy and straight forward and I love that the front, top and back just pop off and on. One thing I noticed is the exhaust fan was very loud. No matter what I did outside of slowing it down greatly, it was audibly louder than all the other fans. I ended up removing it and the lower intake fan and replacing the case fan with an aRGB 120mm and the intake with an aRGB 140mm. Another issue is one many case makers make and that is a lack of depth in the rear of the case for thicker cables to lay down easily and snap the back on especially if you have longer/thicker cables, hubs, accessories or more. It's crazy what even another inch would do overall. Lastly, and the biggest problem, was the riser card. This was installed with an Asus B650 Prime motherboard and no matter what I did the card would not sit fully in the PCIe slot because it didn't have enough depth before the screw down slat was flush with the rear screw bracket and bottom latch. I ended up having to detach it and readjust it and let it float a bit to fit in properly and now the screw down portion is about 1/4" above the screw hole instead of flush. Doing some searches shows I'm not alone in this problem with the riser implementation and most likely it is a seating issue with the PCI card->motherboard. Some have also had issues with the actual GPU mounting too. Now that everything is up and running, I DO like the looks and visuals of the case very much and it turned out exactly like I thought it would but the loud fan(s), poor QC on the PCIe riser and yet again lack of cable depth in the back for easier runs has me on the fence overall with this case.

Roomy for a mid tower. Easy for cable management. Makes for a very clean build.

Loooks really nice , nice airflow and gpu mount make it looks cool

Nice looking case with nice temps. Great cable management, well done HYTE!!!

Great case not as roomy as y60 but still plenty of room for an easy build pure white really pops.

The Hyte y40 is a brand new compact mid tower case from the folks at hyte. The case offers a clean, minimalist design with tempered glass side panels that show cases your build similar to their y60 case. The case also includes a pcie Gen 4 riser cable which is a nice added on inclusion. I much prefer the look of the y60 but I also got the y40 purely because it fits my desk more in terms of space. Overall, the y40 is a sold choice for those who wants to showcase their builds.

Great case, plenty of space and great cable management! Vertical gpu mount is excellent and glass look is awesome!

My HYTE Y40 case is fantastic! It looks so clean and has intricate designs across the sides. The cost might seem a little high but it's honestly worth it here. It comes with a free riser cable, usually $50 for a good one. I was worried about shipping problems because of all the tempered glass but everything is packaged VERY securely from HYTE. Can't wait to build my PC in this case!

best case for vertical mounted GPU, plentiful space for even the biggest cards to breath, second time using this case for a build and probably won’t be the last so long as they are available, a breeze to build in and looks amazing!

Amazing case, the glass panels make it a very nice display piece!

Innovative. Awesome looks. Integrated video card mounting bracket. Expensive but for those looking for a case to show off the GPU, not many other choices. On the other hand side intake airflow can be trickier to pull off, only a 240/280 radiator (or equivalent fans). Another complain, top mounted fans are a bit too recessed and not really visible and when you have expensive fancy fans, it feels like they're wasted. Overall a bit of a niche product offering limited choice but still 5 stars for innovation and quality

The HYTE Y40 is a stunning, modern mid-tower case with panoramic tempered glass panels and clean lines that showcase your build beautifully. It includes a PCIe 4.0 riser cable, which adds value, and supports vertical GPU mounting for a sleek look. While the design is excellent, airflow is somewhat restricted due to limited front intake and reliance on side ventilation. It’s best suited for builds with efficient cooling solutions. Overall, it’s stylish and affordable for showcase builds.

I really love the look of this case, I really wish there was a bit more room for cable management but overall not bad. Also love the fact that this case allows you to vertically mount you GPU making it look even more amazing. Ive seen alof of reviews saying that airflow isnt this best in this case but in my experience I havent had any issues with overheating. Definitely recommend if you want a case that shows off your components.

Beautiful case to look at and an ease to build in. I’m using two lian li rgb controllers as well as a vetroo aio controller and all were mounted in the back panel without incident, and more than enough room for cable management.

This computer case looks great, the only downside is if you use a 240 mm radiator you need to reverse the fans to blow outward or The Thermals are higher, this takes away from the aesthetics of the build.

Using for a family build. Fits an MSI mobo with a 7900X3D and an NVidia 2080Ti. I can barely fit the 3 fan radiator for water cooling at the top. Had to remove the rear fan to install. CPU power cables barely cleared it as well. Will have to replace the rear fan with a smaller one. Cable management is fairly easy. Fits a normal power supply in bottom section. The only real negative would be that one can only use half height add-in cards. Isn't really a problem with this, since it's going to be used just for 1440P/1080P gaming. Panel removal is easy and everything is accessible. The vertical placement of the video card makes this case worth it.

Y40 is good but little hot. You gonna need 2 intake fans, 140mm at least, to let you pc breath. Quality is very good. Very impressive design and overall a beautiful case. I giving 4 of 5 start because the fans that come with it doesn’t help. You need 2 i takes 140mm. My suggestion is get the y60 better temps on it. 50$ more. But y40 is good with little hiccups.