Customer Ratings & Reviews

This is exactly what we needed to fit our new washer and dryer into our tiny laundry room. Keeps the stacked washer and dryer very sturdy and stable, and saves us room in the laundry area. It was pretty easy to install too.

Kit worked perfect for stacking my Samsung WF42H5400AW washer and DV42H5400EW dryer. Saves a lot of space and puts the dryer at a great height for loading. Downside is you cannot see the settings dial very well and I'm 6' 1''. Not that big of a deal if you turn it to a setting you can see and then count the steps back to the setting you want.

I received the washer before the dryer. So initially all I had was the washing machine and my old dryer side by side. When the dryer arrived I looked at the space where it was going and thought "it would be nice to have that space for a utility sink for bathing our dogs. I went online and found the stacking kit for the machines. After reviewing on how easy it was to install a kit I decided to order (price was comparable to other stores) a kit. After about an hour of installing and setting the dryer on top of the washer my dream of putting in a utility sink became real. A day or later I installed the sink along side of my newly stacked machines and my wife and I are loving having a place to bathe the dogs other than the kitchen sink.

This kit securely stacked the dryer on the washer and locked them together. it has rubber runners that go on the bottom of the dryer that saves scratches on the washer. Easily installed, safe and secure. Great value for great quality

Easy to install, just leave them a little loose and all 4 holes will line up, then tighten. They give you two pairs of rear brackets for 2 different models/hole alignments. Toss the other two. Stacking the units is very handy and has worked great. We put the laundry basket up on top. You remove the legs to use this kit. They just unscrew. I put a little square of thin hard foam from an old yoga mat under the place where the front legs were just to avoid unnecessary scratching. but not needed.. The pictures of the kit show those two plastic pieces. I couldn't for the life of me figure out from the photos what they could be! So I was a bit leary of ordering as after looking at the Units I had no clue where they would go.. But upon receiving them, it becomes clear. They screw onto the side of the Dryer bottom and the curve rolls over the edge of the Washer Top. They seem to have an unnecessarily complex molding design that still kinda throws you thinking, "Something must attach to these" A++

Works as advertised. Easy installation and washer/dryer continue to be balanced and quiet during run cycles.

My husband was so happy that I found this at Best Buy - we were looking all over and I had not thought of BB until google showed me the way. Had found the w&d at Home Desperate and they did not have the stacking kit in stock and ordering would take long and cost more. So happy BB had it available quickly - and for a lower price.

I now can use the other side (where my washing machine use to sit) for shelving and hanging clothes from out of the washer or dryer-- you have to get a stackable washer and dryer to use this device...but once you do WOOOHAAA! LOVE IT, BellaSensation

Bracket is well made and easy to install. The only thing is that the set has to be assembled before you push them as close to the wall because the bracket screws directly into the dryer on the back side. Other than that I had no issues since I purchased about 6 months ago.

While these brackets certainly work, I would have to think they could come up with a better method than these brackets. They are difficult to install unless you have arms like a gorilla, by that I mean long. Or you have the strength of a gorilla and can move the stacked washer and dryer. While not perfect, a couple of things may make it easier to install into a corner. 1. Before you place the dryer on top of the washer. Take one of the sheetmetal screws that mount to the back ( of the dryer ) and screw them in and take them out. The screws are self-tapping, so it takes a good deal of force to get them started and cut through the paint & metal. This is nearly impossible when you are reaching ( 27" ) behind the stack with only inches to work with. 2. Don't tighten the brackets on the washer, at least not at first. The bracket, when tightened, does not exactly align with the holes on the back of the dryer. You need some play to get the screws started on the back of the washer and you are blindly feeling around for the hole. After you get the bracket tightened up to the dryer, then you can tighten the ones that mount to the washer. 3. A short clearance ratcheted screw driver & nut driver helped. If you have access to both sides of the stacked pair, then you may not have as much trouble as I did.

I highly recommend getting this kit for Samsung dryers. Works well and is barely noticeable.

Stacking the washer and dryer is a great space saver! The instructions are a little weak and the dryer sticks out quite a ways to leave room for all the connections in back.

Never had any issues. It has been working great since day 1.

Kit works as intended to stack amazing washer/dryer.

We love our samsung washer & dryer. it works. it is quiet when it run's. it is a front louder and fun to watch,

The price seems like a bit much for some metal and plastic. It does work and connects the 2 items. Need an extra person to lift. The controls for the dryer are a reach for a short person.

Crazy that you have to spend so much money on these but they are needed!

Stacking kit, does what it needs to do. It looks nice w/the appliances.

Used this stacking kit for the Samsung washer/dryer.