Customer Ratings & Reviews

this screen protector covers the screeen well, does not destort and fits perfect.

I HATED this screen protector a long time until I got used to the stupidest part: THERE'S A STUPID LINE AROUND THE ENTIRE THING!!!!! Its designed to match the curve of the screen, but it covers the curve with a line so the light ups are WAY less bright. ONLY reason it got any stars: Its a good protector of screens for about a year to year and a half, then the first layer starts to be to scratched to use the fingerprint scanner. Then they'll replace it!

I try this for the first time and I put it on for my samsung s20 n it was perfect. Barely much bubble if you do it right. Good thing I bought it for an expensive phone. Def help it alot protecting the screen. Hard time detecting fingerprint since I'm not use to it but as far as using the keyboard it work perfect

I'm disappointed I even spent money on this, and I knew I shouldn't of. Oh well, $35+ down the drain. The protector covers the top and sides of the phone very well but is about 1/4 inch too short on the bottom. It only goes down to the actual end of the panel and not towards the bottom of the phone. If you're like me and you use screen gestures to navigate, you'll be constantly scraping your finger against the protector and it'll eventually work it's way loose. After less than 24hr it had started to move just from this alone. In addition, the fingerprint sensor became almost unusable. Since it covers the in-display sensor, it would take up to 4-5 seconds to register a fingerprint even after redoing them. I ended up just taking the whole thing off and the FP works instantly. I just ended up just tossing in the trash as BB kept the box after installing it and threw it away so couldn't return anyways. It says it feels like glass, but it still feels like rubber and fingers don't really glide easily. If this was more like $10-15 I wouldn't gripe, but it's nearly $35 after tax.

Seems to work great so far and the included installation kit is really easy to use. Only minor problem is the the border has a slight black line. Probably extra a different material for added structure on the edge. Its only really noticeable at the top around the front fscing camera lense. Bothered me for a bit but bow I hardly notice it. Well worth the protection.

It's a very nice screen cover. Although it took a bit to get it right

Screen protector does its job. There are many surface scratches though.

Tried 2 of the glass fusion screen protectors. Both bubbled up and scratched within a couple days.  They also interfered with fingerprint reader.  Switched to the Advanced scratch & shatter screen protector.  It's only been a week, but no bubbles and no more issues with fingerprint reader.

It scratched way to easy and I was very careful where I put it

This particular screen protector has a super sticky side, which is different than other Zagg shields I've used. Despite my best efforts, it was impossible to get the screen protector on without dirt underneath. Once the spec was stuck to the sticky side, it was impossible to get off. I even tried washing it (per some YouTube videos), and it only got worse. I'd pay a little extra to get the tempered glass kind that doesn't have a crazy sticky side that picks up every little spec of dust in the air.

its ok takes marks pretty easy but protects the phone well

Everything works. But the finger scanner when pressed against the glass doesn't allow the phone to recognize to well.

The screen saver is working great. It fits well and no problem using the keyboard. A big thank you to the associate who put it on for me and was meticulous with it. Thank you very much

I'm a little disappointed because it kept bubbling up on the sides. So I ended up taking it off and reapplying it. But with my luck even after I wired my screen it with the dust slip remover I ended up with alot of dust. So now I have bubbles in the middle of the screen. On a good note- the sides stay down now. I think I'll give it another try and buy another screen later on

Easy to install but it scratches really easy 2 days after installing it had scratches and don't know how.

The fusion screen protector was the only one available. It offers a clear view, easy to clean and it hasn't affected the sensitivity of the screen.

I'm notorious for cracking my phone screen. I've always used Zagg invisible glass shield on my phone and it works SO WELL!! Easy to apply also.

Definitely not worth the money! Corners are peeling up after following directions and within minutes of application. The "tray" with the knobs provided to align the film prevent a secure application for the top and bottom of the film. While the glass fusion does seem to provide better functionality of the phone then the glass shield, not sure the peeling film is going to provide the protection of the other protectors.

This is a incredibly strong hybrid glass. Have someone at Best Buy put it on, they are more likely to get this on right. This glass is like a parachute, get it right the first time because fixing it is not fun. I actually owned this shield since March 2020 and used it on the galaxy s10 when it was introduced. Best buy allows a warrnety exchange/swap when the shield gets messed up. They look up your proof of purchase receipt via phone number and if you have it great. Don't throw away your shield, they need thay to give to Zagg (company that makes the shield). Easy warrenty to do. Never throw away your glass! Keep it for the warrenty and always provide Best buy necessary information when you buy it to show you have a record there to make it easy in future.

This screen protector is great. I had film before, but it got scratched and refused to stick in places. With this screen protector, I feel like I have a new phone.