Results

Main Results

View:
Dremel - 1.75mm PLA Filament - Cotton White - Larger Front
  • Model: DF01-01
  • SKU: 4246500
Compatible with select Dremel Idea Builder 3D printers; plant-based PLA material; 1.75mm diameter; 374-to-428-degree printing temperature range; 1.1-lb. unit
$18.99
SAVE $11Was $29.99
RoBo 3D - 1.75mm PLA Filament 2.2 lbs. - Carbon Fiber - Larger Front
  • Model: 00-0592-FI
  • SKU: 4564502
Compatible with select RoBo 3D printers; PLA material; print temperatures from 383 to 437 degrees; 2.2 lbs. of filament
Dremel - 1.75mm PLA Filament 1.1 lbs. - Deep Black - Larger Front
  • Model: DF02-01
  • SKU: 4214108
Compatible with Dremel Idea Builder 3D20 3D printers; plant-based, recyclable PLA material; withstands print temperatures from 374° to 428°
$22.99
SAVE $7Was $29.99
XYZ Printing - 1.75mm ABS Filament - Steel Blue - Larger Front
  • Model: RF10XXUSZYB
  • SKU: 7740007
XYZ PRINTING 1.75mm ABS Filament: Compatible with select XYZ Printing da Vinci 3D printers; ABS thermoplastic material; 1.8-lb. spool
$25.99
SAVE $2Was $27.99
XYZ Printing - 1.75mm PLA Filament for Select XYZ Printing da Vinci Jr. 3D Printers - Clear Green - Larger Front
  • Model: RFPLCXUS04E
  • SKU: 7475269
XYZ PRINTING 1.75mm PLA Filament for Select XYZ Printing da Vinci Jr. 3D Printers: Compatible with XYZ Printing da Vinci Jr. 1.0 3D printers; 1.75mm diameter; PLA material; 1.8-lb. spool
$25.99
SAVE $2Was $27.99
Dremel - 1.75mm PLA Filament 1.1 lbs. - Blue - Larger Front
  • Model: DF06-01
  • SKU: 4214106
Compatible with Dremel Idea Builder 3D20 3D printers; plant-based, recyclable PLA material; withstands print temperatures from 374° to 428°
$23.99
SAVE $6Was $29.99
CreoPop - Temperature Ink - Photopolymer Ink (3-count) - Blue/Bright Greenish Yellow/Purple Blue - Larger Front
  • Model: SKU008
  • SKU: 4477302
CREOPOP 1mm Photopolymer Filament 0.57 lbs. (3-Count): Compatible with most CreoPop 3D printer pens
CreoPop - Regular Ink - Photopolymer Ink (3-count) - Blue/Black/Green - Larger Front
  • Model: SKU003
  • SKU: 4477314
CREOPOP 1mm Photopolymer Filament 0.57 lbs. (3-Count): Compatible with most CreoPop 3D printer pens
CreoPop - Regular Ink - Photopolymer Ink (3-count) - Purple/White/Yellow - Larger Front
  • Model: SKU004
  • SKU: 4477332
CREOPOP 1mm Photopolymer Filament 0.57 lbs. (3-Count): Compatible with most CreoPop 3D printer pens
New Matter - 1.75 mm PLA Filament 1.1 lbs - Polar White - Larger Front
  • Model: 853106006427
  • SKU: 5705807
Compatible with MOD-t 3D printer models; 1.75-millimeter PLA filament; break-resistant formula
3Doodler - Eco-Plastic Filament for 3Doodler Start (Mixed 24-pack) - Primary Pow - Larger Front
  • Model: 3DS-ECO-MIX2-24
  • SKU: 5506733
Compatible with 3Doodler Start printing pen; biodegradable eco-plastic material
3Doodler - Eco-Plastic Filament for 3Doodler Start (24-pack) - Lemon Zest - Larger Front
  • Model: 3DS-ECO04-YELLOW
  • SKU: 5506750
Compatible with 3Doodler Start printing pen; biodegradable eco-plastic material
3Doodler - Eco-Plastic Filament for 3Doodler Start (24-pack) - Simply White - Larger Front
  • Model: 3DS-ECO01-WHITE-
  • SKU: 5506751
Compatible with 3Doodler Start printing pen; biodegradable eco-plastic material
MakerBot - 1.75mm PLA Filament 2 lbs. - Slate gray - Larger Front
  • Model: 111746-00
  • SKU: 5661224
  • Compatible with Replicator +, + Essentials Pack, Fifth Generation printers
  • 1.75mm diameter
  • PLA material
  • With a maximum printing temperature of up to 419°
  • Fused deposition modeling
MakerBot - 1.75mm PLA Filament 2 lbs. - Ocean Blue - Larger Front
  • Model: MP06102
  • SKU: 8629026
Compatible with MakerBot Replicator 5th-generation, Replicator 2 and Replicator Z18 3D printers; PLA material made from nontoxic resin; adheres well to acrylic and to MakerBot Build Plate Tape; 2-lb. spool
3Doodler - Eco-Plastic Filament for 3Doodler Start (Mixed 24-pack) - Fire and Ice - Larger Front
  • Model: 3DS-ECO-MIX1-24
  • SKU: 5506739
Compatible with 3Doodler Start printing pen; biodegradable eco-plastic material
MakerBot - 1.75mm PLA Filament 0.5 lbs. - Warm Gray - Larger Front
  • Model: MP05793
  • SKU: 8629104
Compatible with MakerBot Replicator 5th-generation, Replicator 2, Replicator Z18 and Replicator Mini 3D printers; made from nontoxic resin; adheres well to acrylic and to MakerBot Build Plate Tape; 0.5-lb. spool
MakerBot - 1.75mm PLA Filament 10 lbs. - True Black - Larger Front
  • Model: MP06237
  • SKU: 8991011
Compatible with MakerBot Replicator 5th generation and a variety of other MakerBot Replicator 3D printers; PLA material is made from nontoxic resin; adheres well to acrylic and MakerBot Build Plate Tape; quality tested
Dremel - 1.75mm PLA Filament 1.1 lbs. - Racecar Red - Larger Front
  • Model: DF03-01
  • SKU: 4214100
Compatible with Dremel Idea Builder 3D20 3D printers; plant-based, recyclable PLA material; withstands print temperatures from 374° to 428°
$22.99
SAVE $7Was $29.99
RoBo 3D - 1.75mm PLA Filament 2.2 lbs. - Rocket Red - Larger Front
  • Model: PLARED
  • SKU: 2428259
ROBO 3D 1.75mm PLA Filament 2.2 lbs.: Compatible with Open Source R1 3D printers; PLA material; 2.2-lb. spool
$34.99
SAVE $5Was $39.99
3Doodler - 3mm PLA Filaments (25-Count) - Blue/Purple/Pink - Larger Front
  • Model: PLMIX9
  • SKU: 7616032
3DOODLER 3mm PLA Filaments (25-Count): Compatible with 3Doodler 2.0 3D pens; PLA material; 10" straight-cut strands; 25-count package
3Doodler - 3mm PLA Filaments (25-Count) - Black/Gray/Brown/White - Larger Front
  • Model: PLMIX7
  • SKU: 7616078
3DOODLER 3mm PLA Filaments (25-Count): Compatible with 3Doodler 2.0 3D pens; PLA material; 10" straight-cut strands; 25-count package
XYZ Printing - 1.75mm ABS Filament - Neon Yellow - Larger Front
  • Model: RF10XXUS0DC
  • SKU: 4955019
XYZ PRINTING 1.75mm ABS Filament: Compatible with select XYZ Printing Da Vinci 3D printers; ABS material; surface-treatable with sandpaper or acetone; 1.8-lb. spool

No matching products found at this store.