Customer Ratings & Reviews

Great service they were polite and very patient and understanding

They work as they should. Makes install simple and helps create space for speakers with bigger magnets. I used these to install a set of crescendo pwx 6.5s and infinity 6.5 in my 2012 tahoe.

??? Not quite sure about these. The Tech seemed pleased to have them. Not everything in bag was used. So: Old speaker dead. Dead speaker has to come out. Dead speaker was 6 inch. But (and, there is always a but) The new speaker is 6 inch also. Yet, not all 6 inch speakets are created equal. The plastic adapters some how mate the holes in the 19 year old truck door to the new speaker. (aka and, then a miracle happened) To me, it sounded like a job for duct tape and JB Weld. Now, this could have been worse. All four speakets were blown. This process only cured two. Had the shop had another bag of brackets, I would've sprung for two more speakers.

I recently upgraded the factory speakers in my 2009 Chevy Tahoe and these Metra speaker brackets made the entire process smooth and stress-free. If you’re working on your Tahoe or a similar GM model, do yourself a favor and grab these first. They lined up perfectly with the original mounting holes—no cutting, no drilling, no headaches. The brackets feel solid and well-made, giving my new speakers a secure and rattle-free home. What impressed me most was how Metra clearly designed these with real installers in mind. Everything just fit. As someone who does most of my own car maintenance and upgrades, I appreciate parts that work the first time—and these did exactly that. Whether you’re a DIYer or a pro, this bracket is a no-brainer for a factory-to-aftermarket speaker swap. One of the best small investments I made in my Tahoe’s audio upgrade! Highly recommend.

These adapter rings were a perfect fit for a 2007 Chevy HHR. They made the speaker installation a snap with the wiring harness adapters also available at Best Buy. Make sure that you save the noise dampening material from the back of the old speaker and apply it to the adapter rings to prevent any rattling.

These made installation in the stock location very easy. I added double sided 3M Body Trim Tape to the back of these. This helped secure them tightly and acts as an insulator between the speaker and door metal.

Good price good quality easy installation highly recommend

While in the process of upgrading my audio system in my vehicle, I discovered that the speakers would not properly mount in my Chevy Cobalt on their own. These adapters were exactly what I needed for a custom fit in my car. They are well made and made for fast and easy installation of my new speakers!

Perfect fit for my Sierra, installed some rockfords without any issues

Perfect fit for ‘18 Silverado rear speakers! Made installation easy.

Perfect fit, easy install. Best buy is the best place for car audio and any technology in general.

Work great. Had to make new drill holes for placement.

Awesome great speakers. Great for anyone to get. Go For it!

Based on YouTube videos I had seen, I thought I was going to have stuff to cut out of these things, but they fit great. And all with a single screw back into the car door where the OEM screw goes.

I used these on 07 Chevy Avalanche. And would use them again. Solid fit. Made install a snap. No drilling. I didn't want to drill any holes so this was a perfect choice. Only reason not 5 star. Is when snapped in. They wiggle a little on the bottom. So I add some sticky foam tape and now super snug fit!

Works in my 2006 Chevy Impala door speaker. Used this along with a 7.75in kicker cs speaker, and fit perfectly. Really well made.

Made the install Easier, however the factory bolt to hold it in place was not enough. I had screw two screws on the bottom of the adapter. The whole adapter rattles if you don’t . The holes are already there for the screws .

Very easy to use and works as intended. So simple even someone else without experience could do it. Did have to create an opening between the ring and door for the speaker wires.

Had to change out my old stock speakers for a new upgrade speakers, this Part definitely fits my 2008 GMC Sierra, no rattles, and easy to install!

I needed this to install New Radio in my 20007 GMC Sierra 1500 classic. Works Great no problems. Like it was made from factory.