StarTech.com - PXTMG1013 3 ft Hospital Grade Power Cord - NEMA 5-15P to C13 - Monitor Power Cable - Power Supply Cord

Need a Japan power cord for a computer, monitor, server, or other device with an IEC C14 inlet? This IEC C13 power cord uses a JIS 8303 Japan plug with two flat blades plus a separate ground lead and ring terminal, paired with an IEC C13 connector for equipment with a standard C14 inlet. The 6 ft VCTF cord uses three 0.75 mm² conductors and is rated 7A at 125V; molded connector bodies protect the terminations during routine office, lab, and rack use. It works as a computer power cord, monitor power cord, or power cord replacement for compatible C14-inlet equipment, provided the outlet has a separate grounding terminal; this IEC power cable does not convert voltage or provide surge protection. Manufactured to RoHS environmental standards. Best for: C14-inlet equipment that needs a Japan plug plus separate ground lead; Not for: loads above 7A, C5/C7/C15/C19 inlets, voltage conversion, or outlets without a compatible ground terminal.

This UL Listed hospital grade power cord connects equipment with an IEC 320 C13 inlet to a NEMA 5-15P wall outlet, carrying a 13A 125V cordset rating over 16 AWG x 3-conductor SJT cable. The green dot on the fully molded 5-15P plug marks certified hospital grade construction, built to the grounding reliability, assembly security, and strength standards that facility compliance checks look for. Thicker 16 AWG copper conductors support a higher 13-amp cordset rating than common 18 AWG C13 cords, while the gray Pantone Cool Gray 9C jacket keeps these runs easy to identify against standard black cords. The 8.5 mm SJT jacket, 105C-rated wire, and molded strain relief on both ends hold up to repeated plugging in daily service. Lengths of 3, 6, 10, and 15 feet let you match each run without coiling excess cable. Best for: hospitals, clinics, labs, and medical or dental offices powering computers, monitors, carts, and equipment with IEC C13 inlets rated within 13A 125V. Not for: life-support or patient-connected applications, outdoor use, C19 inlets, or devices requiring more than 13A.

Lost the original cord, or need a longer, shorter, or heavier one for your PC, monitor, or printer? This Cable Leader 14 AWG heavy-duty computer power cord is a 3-prong power cord with a standard NEMA 5-15P plug for any 120V wall outlet, power strip, or UPS and an IEC C13 connector for the C14 inlet on your device, rated 15A at 125V for up to 1875W, 50 percent more current than a typical 10A 18 AWG cord. Three 14 AWG copper conductors run inside a flexible SJT jacket rated to 105°C, and this UL Listed AC power cord has molded ends for strain relief. A universal power cord replacement for any device using an IEC C14 inlet, including desktop and gaming PC power supplies (PSU), monitors, laser and inkjet printers, projectors, scanners, servers, and network switches. Best for: replacing a lost or damaged PC power cord or monitor power cable, or reaching a far outlet with a long power cord. Not for: 2-prong devices, C7 figure-8, C5 cloverleaf, or C20 inlets, 240V circuits, or outdoor use. RoHS compliant.