“After installing the board, the Q-code goes to code 55 - no memory installed. I have installed DDR5 memory in a single and multiple slots. It still gives to code 55. Also, the display won't come up. Can you help with this?”
Answer This Question
1-4 of 4 Answers
I have exactly the same problem and have also tried different memory configs (2x32GB 6400, 1x32GB, 2x16 5400, 1x16 5400, etc.). Research shows the error 55 problem has plagued ASUS motherboards for years. Very disappointed and will exchange for something else.
Sorry, there was a problem. Please try again later.make sure your memory is seated properly and the tabs are completely seated, find 1 memory stick that you know is good and install it in slot A, if that does not work you may need to RGA the board.
Sorry, there was a problem. Please try again later.While this is the error for the RAM not being detected, it can also occur from issues with the CPU. An unfortunately "common" example is when the pins on the board get bent during installing the CPU or the CPU is tightened down far too much by the installation of the fan and heatsink.
Sorry, there was a problem. Please try again later.I have not install yet when I do I will find out
Sorry, there was a problem. Please try again later.