“When I installed a new TN 450 in my copier, the message, "replace toner" will not clear from the machine? What did I do wrong?”
Answer This Question
1-8 of 8 Answers
I've had no problem installing the TN450 in my HL-2240 printer. The installation instructions say to have the printer ON when installing the toner unit and, after closing the front cover, wait for the "Ready" LED to come on before doing anything else. I hope this helps.
Sorry, there was a problem. Please try again later.Sometimes you have to shake the cartridge gently from side to side and slide the green tab back and forth several times.
Sorry, there was a problem. Please try again later.Just keep using toner until printing begins to fade.
Sorry, there was a problem. Please try again later.NP
Sorry, there was a problem. Please try again later.Read the manual: http://support.brother.com/g/b/manualtop.aspx?c=us_ot&lang=en&prod=hl2280dw_us
Sorry, there was a problem. Please try again later.Try these steps I found using google search results: 1. Open the front panel. 2. press the clear button (display will show: replace drum 1.yes 2. no) 3. press the * star button, NOT the # button. 4. you should see "accepted" on the panel. laser printer - Brother MFC7360N keeps saying "replace toner" - Super ... superuser.com/questions/783439/brother-mfc7360n-keeps-saying-replace-toner
Sorry, there was a problem. Please try again later.Consult the owner's manual. You have to turn the copier on and leave it on for something like 20 minutes before replacing the toner cartridge. It's stupid, but that is what the owner's manual says to do.
Sorry, there was a problem. Please try again later.Perhaps the message on your copier has cleared by now. First I check the manual; then re-install the cartridge. If message continues, what works for me is to press cancel and then OK.
Sorry, there was a problem. Please try again later.