I have had no issues in cooling mode with the unit; however, when I use it in dry mode, water leaks down the inside of the back of the unit (in addition to out the drain hole). Any idea why this is happening or how I can get it to drain properly? null

Question

Lydia · Accepted Answer

Get a garden hose and screw it to the back of the units rubber attachment tightly. A small hose will do. Cut it if it's too long, and put the end in a bucket to c a tch the water.

OldDawg · Answer

The operating instructions in the user manual says that in DRY mode, the exhaust hose does not need to be hooked up; but the water removed from the air during the drying process must be drained. Remove the rubber plug from the drain hose fitting located on the back of unit, about halfway down from the top, and connect a drain hose.

Answered by OldDawg 8 years ago

Verified Purchase

“I have had no issues in cooling mode with the unit; however, when I use it in dry mode, water leaks down the inside of the back of the unit (in addition to out the drain hole). Any idea why this is happening or how I can get it to drain properly?”

1-2 of 2 Answers