Questions & Answers

Q: QuestionI am replacing JVM1950DR1CC will this fit the previous bracket on the wall? Is this model comparable to the one I have?

Asked 5 years ago by Robert.

• A:Answer Hi Robert - We certainly appreciate your loyalty! Yes, Model JVM7195SKSS is the comparable replacement model. You will love your choice. When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. We're glad to have you in the family. Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWe currently have model jnm7196sk2ss and can’t seem to find a replacement. Is this model the same/can replace our broken one with this model?

Asked 5 years ago by Erin.

• A:Answer Hi Erin - Thanks for reaching out to us! We are sorry to hear your microwave jnm7196sk2ss is no longer working and apologize for any inconvenience this has caused. This model is still current. Enter Model JNM7196SKSS in the Search field. It is factory-assembled for recirculating. GE 1.9 Cu. Ft. Over-the-Range Microwave with Sensor Cooking Model JVM7195SKSS is the same microwave except factory assembled for outside venting but can be converted to recirculating. We certainly appreciate your loyalty. Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs there a Microwave Filter on this, and need to be change when due. and how much is the cost ?

Asked 5 years ago by Roy.

• A:Answer Hi Roy - Thanks for considering GE Model JVM7195SKSS! If the microwave is converted to recirculating and not vented to the outside, the air will be recirculated through a disposable charcoal filter (WB06X10807 included) that helps remove smoke and odors. You can view and purchase additional filters (if not vented outdoors) at GEApplianceparts.com: https://www.geapplianceparts.com/store/parts/spec/WB06X10807?SpecType=SpecType - Here's the link to the Use and Care Manual: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40766-2.pdf - Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI want to replace a GE built-in Microwave, Model # JVM1870SF001. What may I buy that will fit into that space. Would like 1.8 cubic feet or more.

Asked 5 years ago by VicaJean.

• A:Answer Hi VicaJean - We certainly appreciate your loyalty! We suggest GE® 1.9 Cu. Ft. Over-the-Range Sensor Microwave Oven Model #: JVM7195SKSS (Dimensions: 16 5/16 H x 29 7/8 W x 15 9/16 D). Model #: JVM1870SF001: (Dimensions: 16 13/32 H x 29 7/8 W x 15 1/4 D). Keep in touch at GEAppliances.com. Enjoy! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (1)Unhelpful (1)ReportAnswer this question

Q: QuestionNeed to replace my 36” GE Profile Spacemaker JVM3670SK. What will work???

Asked 5 years ago by Min.

• A:Answer Hi Min - When replacing a 36" over-the-range microwave, many current 30" over-the-range microwaves offer an optional 36" filler kit to allow it to be installed in a 36" cut-out opening. Model JVM7195SKSS is compatible with Optional 36" Side Filler Panel Kit JX36DSS (sold separately). Thanks for your loyalty! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have an older model # EM03000Ccc04 made sept 2002. What model replaces this one and will it use the old bracket???

Asked 5 years ago by Anonymous.

• A:Answer Hi - Thanks for reaching out to us! We certainly appreciate your loyalty. Model # EMO3000CSS is 16 15/32 H x 29 7/8 W x 15 1/16 D. Model JVM7195SKSS is a great replacement choice with sensor cooking controls (Dimensions: 16 5/16 H x 29 7/8 W x 15 9/16 D). All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. However, when replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. Keep in touch at GEAppliances.com. Enjoy! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhere does the steam vent out of this microwave? The top, front, or back? I am worried about my cabinets.

Asked 5 years ago by KeepSmiling.

• A:Answer Hello KeepSmiling, thank you for your question. This microwave can be installed to vent out of the front, back, or top. For instructions on how do to this, we recommend you check on our website for the installation instructions. We hope this helps! -Chris@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat is the fan noise level for each of the exhaust fan selections. Looking for a low noise level fan if this isn’t any suggestions. Thanks

Asked 5 years ago by Gary.

This question was asked about the related product: GE - 1.9 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Steam Cleaning - Black

• A:Answer Hi Gary - The only products currently rated in sones are external exhaust range hoods. Recirculating hoods and most over-the-range microwaves are not rated. The exhaust fan is comparable to undercabinet range hoods. Thanks for considering GE! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (1)Unhelpful (1)ReportAnswer this questionShow more answers (1)

Q: Questionour current ge , model jvm7195dfiww is rated at 1100 output and 1700 input. is there a model equivalent to this inout and output?

Asked 5 years ago by tm.

This question was asked about the related product: GE - 1.9 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Steam Cleaning - White

• A:Answer Hi tm - GE® 1.9 Cu. Ft. Over-the-Range Sensor Microwave Oven JVM7195DKWW is the current model (1000W Output/Electrical Input 120V- Watts 1580). All other models in white are the same except JVM6172DKWW (Electrical Input - 120V Watts 1600). We certainly appreciate your loyalty. Keep in touch! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have modelJVM1640CJ03 bought 11/05 .is the 1.9 CU. FT OVER THE RANGE MICROWAVE USED TO REPLACE IT.

Asked 5 years ago by Ray.

• A:Answer Hi Ray - All GE 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for your existing 30" over-the-range model JVM1640CJ03 ((WxHxD) (in.) 29 7/8 in x 16 3/16 in x 15 5/32 in). We offer GE® 1.6 Cu. Ft. Over-the-Range Microwave Oven JVM3160DFCC in bisque. If you are interested in stainless, Model JVM7195SKSS is also a great choice. This model has an easy-clean, dark gray enamel interior with steam clean option and sensor cooking controls. We certainly appreciate your loyalty! Keep in touch! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWe have model JVM 7195EK1ES. The panel has quit working there’s power to the outlet but it will not come on. the light nothing. It is dead. It worked fine just a few hours before. Does it have a fuse somewhere?

Asked 5 years ago by Kim.

This question was asked about the related product: GE - 1.9 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Steam Cleaning - Slate

• A:Answer Hi Kim - Thanks for reaching out to us and for choosing GE. We are sorry to hear your microwave JVM7195EK1ES is no longer working and apologize for any inconvenience this has caused. We suggest resetting the electronics by unplugging (outlet generally in upper cabinet) or turning off power at the circuit breaker for 30 seconds or so. While microwaves have an internal fuse, it is not consumer replaceable. It could be one of many components. For safety reasons, we offer no do-it-yourself repair advice on microwave ovens due to high voltage (capacitor hold a high voltage charge even after it has been unplugged), complexity of electronic circuitry and special equipment needed to make diagnosis. A qualified GE service technician is required for an accurate diagnosis. To schedule service online, visit us at GEAppliances.com or call 1.800.GE.CARES (800.432.2737). Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat does installation cost for an over-the-range microwave ?

Asked 5 years ago by Linn.

• A:Answer My 82 year old husband & I (80) did it. Hardest part was raising it up to hook over the bracket on the wall. Used the bracket already on the wall from the old oven, same brand now 14 years old.

  Answered 5 years ago by Oven

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHi we are looking to replace our otr microwave GE model PVM2070SM1SS. Is this microwave comparable? I don’t see the melt or soften feature on this model. Also does this unit use the same mounting bracket as our current model? Thanks

Asked 5 years ago by Singer2190.

• A:Answer Hi Singer2190 - We certainly appreciate your loyalty! Yes, Model JVM7195SKSS is a great replacement choice for your current model PVM2070SM1SS. The Melt pad is located under the Popcorn pad near the top below the display. Melt allows for worry-free melting of butter, caramel, chocolate and marshmallows. All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. Also, when replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. We're glad to have you in the family. Enjoy! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat microwave will replace GE Profile modelPVM2070SMC03

Asked 5 years ago by Bopper.

• A:Answer Hi Bopper - All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model, including model PVM2070SMC03. Check out GE Profile™ 2.1 Cu. Ft. Over-the-Range Sensor Microwave Oven PVM9215SKSS and GE® 1.9 Cu. Ft. Over-the-Range Sensor Microwave Oven JVM7195SKSS (same exterior dimensions: 29 7/8 in W x 16 5/16 in H x 15 9/16 in D). We love having you in the family! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (1)Unhelpful (1)ReportAnswer this question

Q: QuestionHi all, what Microwave will replace a GE profile space saver microwave Model No. PNM1871SM3SS< It is no longer being manufactured. Please Help. Rina

Asked 5 years ago by Rina.

• A:Answer Hi Rina - We certainly appreciate your loyalty and suggest GE - 1.9 Cu. Ft. Over-the-Range Microwave Model JNM7196SKSS. This models is factory assembled for recirculating (non-vent). Model JVM7195SKSS is the same except factory assembled for outdoor venting and can be easily converted to recirculating. We love having you in the family. Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs there an inside cooking light for this unit? also, where is the light under cook top located on this? is it both sides left and right just like my old model JVM1630BB004 which just died on us. Is the wall mount same configuration as this?

Asked 5 years ago by KingofLasVegas.

This question was asked about the related product: GE - 1.9 Cu. Ft. Over-the-Range Microwave with Sensor Cooking - Black Stainless Steel

• A:Answer Hi KingofLasVegas - Yes, all GE over-the-range microwaves, including JVM7195BLTS, have interior lighting. Also, the cooktop light is located front center, between the left and right grease filters. Take a look at page 23 of the Use and Care Manual: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40766-2.pdf - When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. We suggest viewing the Installation Guide at the following link for details: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40765.pdf - We certainly appreciate your loyalty. Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a GE JVM1870SF02 model with recirculating venting. I would to know what GE Model can replace. Also, there is a vent flap on the top face of the microwave that opens when the fan is operating. Does the replacement model have this?

Asked 5 years ago by Kurtis.

• A:Answer Hi Kurtis - It's great to hear from you! We certainly appreciate your loyalty and glad to have you in the family! Comparable models are GE Profile™ 2.1 Cu. Ft. Over-the-Range Sensor Microwave Oven PVM9215SKSS and GE® 1.9 Cu. Ft. Over-the-Range Sensor Microwave Oven JVM7195SKSS (Model JNM7196SKSS is the same as JVM7195SKS except factory-assembled for recirculating). All models can be converted to recirculating. All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for an existing 30" over-the-range model. Also, current models no longer have an active vent (vent flap that opens when operating). The vent is now located on top of the door. Keep in touch at GEAppliances.com. Enjoy! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes ge make a 1.9 cub ft. That also bakes like my adventium

Asked 5 years ago by Marie.

• A:Answer Hi Marie - We certainly appreciate your loyalty! We offer GE Profile™ 1.7 cu.ft. 120 Volt Over-the-Range Oven with Advantium® Technology PSA9120SFSS (PSA9240SFSS- 240 Volt). We suggest viewing the Quick Specs document at the following link for all product and cabinet cutout dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=240452_psa9120sf_c3.pdf - We love hearing from you. Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI am replacing a JVM1850SM2SS and I would like to know if the mounting bracket will work with the new Microwave - JVM7195SKSS SKU 5291514?

Asked 6 years ago by Edge.

• A:Answer Hi Ed - We certainly appreciate your loyalty! When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. We’re glad to have you in the family. Keep in touch at GEAppliances.com. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question