“I have my unit set at 64 degrees and when it hits that mark, the motor stops and it starts blowing room temperature air until it goes back up to 68 degrees. I want it to consistantly blow cold air and stay at 64. It’s on cool mode. Why does it do this?”
Answer This Question
1-2 of 2 Answers
Hi - Thanks for choosing GE Model # AHP06LZ. An electronic thermostat is used to maintain the room temperature. The compressor will cycle on and off to keep the room at the set level of comfort. This is normal. Energy Saver Mode controls the fan. When On, the fan will cycle on and off with the compressor. This may result in wider variations of room temperature and humidity. NOTE: the fan may continue to run for a short time or may pulse intermittently after the compressor cycles off to sample the room air. When Off, the fan runs all the time, while the compressor cycles on and off. Set to Auto for the fan speed to automatically set to the speed needed to provide optimum comfort settings with the set temperature. If the room needs more cooling, the fan speed will automatically increase. If the room needs less cooling, the fan speed will automatically decrease. Here's the link to the Use and Care Manual for reference: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-5000461.pdf - Keep in touch at GEAppliances.com. Sue
Sorry, there was a problem. Please try again later.Make sure it's not on Eco mode.
Sorry, there was a problem. Please try again later.