Questions & Answers

Q: Questionwhen would this be available to buy?

Asked 8 years ago by Filli.

• A:Answer Hello Filli, Thank you for your interest in our black stainless range hood. Please check back with us after the first of the year for availability. Lisa from GE Appliances.

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan this hood be used for a island or does it have to be attached to a back wall?

Asked 8 years ago by Steph.

• A:Answer Hi Steph- No, GE® 30" Wall-Mount Pyramid Chimney Hood JVW5301SJSS must be wall mounted. We also offer GE Profile™ Series 36" Island Hood PV977NSS. Thanks for viewing GE! SUEatGEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this range hood extend to fit properly for a kitchen with 9 foot ceiling???

Asked 9 years ago by shortie.

• A:Answer For me it didn't so I had to get an extension

  Answered 9 years ago by ChristianVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionIs this hood compatible with a gas range? How much are the charcoal filters? Thank you

Asked 9 years ago by Jill.

This question was asked about the related product: GE - 30 inches - Convertible & Recirculating - Wall Range Hood - Slate

• A:Answer Hello Jill - this is Nancy at GE Appliances and I am happy to help you. Yes, this hood can work with a gas range, however, we recommend checking the range installation instructions to verify the CFM's on this hood are sufficient. The charcoal filter is part #JXCF72. I hope this helps! Thanks for checking with us!

  Answered 9 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionGE 30" hood on sale at $449.00What size the evacuation tube of this model connects to, 6" or 8" dia?

Asked 10 years ago by Pierre.

This question was asked about the related product: GE - 30 inches - Convertible & Recirculating - Wall Range Hood - Slate

• A:Answer Hi-this is Sue from GE. Thanks for your interest! This hood is designed to be vented vertically through the ceiling. Use a 6" round duct. Use locally supplied elbows to vent horizontally through the rear wall. Or, a recirculation duct (included) and two charcoal filters (not included-JXCF72) are necessary for recirculation installation. Thanks for checking with us!

  Answered 10 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionRemodeling our kitchen. We have close to 4 ft from stove top to ceiling. We are not venting to the outside. What would the hood look like with 4 ft of clearance to ceiling? I want it to be close to ceiling with appearance of venting outside.

Asked 3 years ago by Hawaii.

This question was asked about the related product: GE - 30 inches - Convertible - Wall Range Hood - Black Slate

• A:Answer Hello- Thanks for your interest in our 30" Convertible Range Hood. This is a really beautiful hood! The installation height should be measured from the cooking surface to the lowest part of the hood. This hood must be installed onto a wall. It can either be vented to the outdoors, or it can be installed for recirculating operation. The hood would look unfinished if you left a 4 foot space to the ceiling. We recommend getting the duct cover. It can be adjusted for ceilings between 7' 3/4" and 9' depending on the distance between the bottom of the hood and the cooktop. Please review page 6 in the installation instructions. https://files.bbystatic.com/g%2FgVtfSWPjoCNQWddBKs%2Bg%3D%3D/D67FF54E-9361-45C4-8C73-34702006953E.pdf If you have any questions in the future, please let us know. We are here to help! Have a great day! Joyce@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (0)Unhelpful (1)ReportAnswer this question

Q: QuestionIs there an extension for the GE hood in slate for a 10' 4" ceiling or 48"

Asked 4 years ago by inneedofextensionfor10footceiling.

This question was asked about the related product: GE - 30 inches - Convertible & Recirculating - Wall Range Hood - Slate

• A:Answer Hi - Thank you for reaching out to us. This pyramid style vent hood includes duct covers that are adjustable and will fit ceiling heights from 7' 3/4" - 9' depending on the distance between the bottom of the hood and the cooktop as described on Page 6 of the Installation Instructions. For a 10' 4" ceiling you will need optional accessory UXDC53EJES -- https://www.bestbuy.com/site/10-ceiling-duct-cover-for-select-ge-appliances-vent-hoods-slate/6396389.p?skuId=6396389-- We hope this helps. Vikki@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (0)Unhelpful (1)ReportAnswer this question

Q: QuestionI need to be able to fit this in a space that is 24" long, i.e, I only have 24" from the bottom of the range hood to the bulk head. Will it fit and look okay?

Asked 6 years ago by Designer.

• A:Answer Hi - Thanks for your interest in GE Model JVW5301SJSS! We suggest to view the Installation Guide at the following link for product dimensions and clearance requirements. The unit must be installed between the 24" required minimum and 38" recommended maximum above the cooking surface: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=31-10983-7.PDF - Keep in touch at GEAppliances.com. We are always eager to help. Sue

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (1)ReportAnswer this question

Q: Questiondo you have some model ductless? can you tell me which is these model?

Asked 6 years ago by coco.

This question was asked about the related product: GE - 30 inches - Convertible & Recirculating - Wall Range Hood - Slate

• A:Answer Hi coco - GE® 30" Wall-Mount Pyramid Chimney Hood JVW5301EJES is a convertible hood which means you can install as recirculating(ductless) or external venting. JXCF72 - Charcoal Filter is required for recirculating (ductless). We suggest to view page 8 of the Installation Guide at the following link: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=31-10983-7.PDF - Thanks for choosing GE! Sue

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (1)ReportAnswer this question

Q: QuestionDo you have any range hoods that can be plugged into the electrical outlet rather than wired in?

Asked 7 years ago by Inky.

• A:Answer Hi Inky - GE® 30" Under The Cabinet Hood JVX5300SJSS can be installed with JXHC1 - Optional Power Cord Kit (sold separately). EASY HOOD INSTALLATION- Play Video: https://www.youtube.com/embed/nrqTMMN9feA?rel=0 - Installation Guide: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-80783-4.pdf - Thanks for choosing GE! Sue

  Answered 7 years ago by GE Answers

  
  Helpful (0)Unhelpful (1)ReportAnswer this question

Q: QuestionCan I install Island Kitchen Style ?

Asked 7 years ago by happyboy.

This question was asked about the related product: GE - 30 inches - Convertible & Recirculating - Wall Range Hood - Slate

• A:Answer No it is not set up for island kitchen style

  Answered 7 years ago by TopguntnlVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat is the difference between the chimney extension kit and the ceiling duct cover? Ordered the black slate 30" wall mount pyramid chimney hood & the ceiling duct cover kit (JXGC72DS) and the ext piece is alot wider than the original and looks strange

Asked 7 years ago by Abbyrose.

This question was asked about the related product: GE - 30 inches - Convertible - Wall Range Hood - Black Slate

• A:Answer Hi Abbyrose- Thanks for choosing GE! So that we can better assist you, please contact us at 1-800-626-2005 or visit our "Contact Us" page at GEAppliances.com: http://www.geappliances.com/ge/service-and-support/contact.htm?icid=GEARtopnav-contact - Keep in touch! SUE@GEA

  Answered 7 years ago by GE Answers

  
  Helpful (0)Unhelpful (1)ReportAnswer this question

Q: QuestionWhat materials are the black slate or slate models made of?

Asked 7 years ago by Anonymous.

This question was asked about the related product: GE - 30 inches - Convertible - Wall Range Hood - Black Slate

• A:Answer Hi - Black Slate/Slate is a highly engineered, low-gloss matte metallic paint finish that will hold a magnet. Black Slate is an extension of the Slate finish family from GE Appliances. It is a deep charcoal color. Its unique matte finish hides fingerprints and virtually eliminates smudges. The Black Slate painted finish also has a small amount of gloss for that sparkly reflection in the light. Explore Black Slate: https://www.geappliances.com/ge/black-slate-appliances.htm - Keep in touch! Sue

  Answered 7 years ago by GE Answers

  
  Helpful (0)Unhelpful (2)ReportAnswer this question