A:AnswerThis 27" trim kit fit perfectly around my 2.2 microwave so maybe you need the 30" kit. I wouldn't know what to recommend to you but I would suggest you take all your measurements of your opening & microwave to Best Buy for them to figure out for you. That's what I did as it was very confusing.
A:AnswerI believe GE makes a Gray surround or you could go with Slate (PEB7227ELES), Black Stainless BLTS, Black Slate FMDS, Stainless SLSS, White DLWW. I urge you to go to the website shown. "Build in microwaves and "Related Products and Accesories" tab that shows all the choices. VERY IMPORTANT!! NOTE: you will have a choice of 27" or 30" surround. It is probably most dependent if you have room for the larger one around the microwave cut out. I had to use the 27" otherwise it would have hung out over the side from the cabinets. It fit PERFECTLY and looks great - - I used the Stainless Steel with the gray.
https://products.geappliances.com/appliance/gea-category/microwave-ovens
A:AnswerThe description literally says it’s compatible with the 2.2 profile microwave. Am I missing something here? Need to buy a 27 inch trim kit myself and if 2.2 is required, I will be upset since it won’t fit.
A:AnswerHi - We encourage you to view the Installation Instructions at the following link for complete cabinet cutout dimensions, clearance requirements, etc.: https://www.myapstore.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40782.PDF - Thanks for choosing GE! Sue
A:AnswerHi Lou- We certainly appreciate your loyalty. We re unable to offer modifications to the UL approved installation provide in the Installation Guide at this link: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40782.PDF - Any product failure due to improper installation is not covered under the Warranty. Thanks for checking with us! SUE@GEA
A:AnswerHello Trev - this is Nancy at GE Appliances and we are happy to help you. Yes, the 27" trim kit for the PEB7227DLWW microwave would be the JX7227DLWW trim kit. It requires a cabinet cutout of 25-1/2" wide x 16-3/4" high. We hope this helps! Thanks for checking with us!
A:AnswerYes. It comes with all the necessary attachments. However the design is poor, as it does not have an easy way to adjust the width or height, therefore forcing you to mess up the wall to make the hole bigger or cut the metal plate slightly to make it fit.
A:AnswerHi Charles- GE Profile™ Series 2.2 Cu. Ft. Built-In Sensor Microwave Oven PEB7227SLSS is compatible with GE® Optional 27" Built-In Trim Kit JX7227SLSS and GE® Optional 30" Built-In Trim Kit JX7230SLSS. We suggest to view the Quick Specs for details: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227SL_BL_R2_17.pdf - Microwave trim kits are not interchangeable. A trim kit consists of the trim frame, as well as an upper, lower, and rear duct that attaches to and encases the microwave inside the cabinet cut-out. It is important to only use the trim kit designed for that model. Thanks for choosing GE! SUE@GEA
A:AnswerHi Joejoe- Thanks for choosing our GE Profile PEM31EFES! No, this model is compatible with GE® Optional 27" Built-In Trim Kit JX827EFES and Optional 30" Built-In Trim Kit JX830EFES. We suggest to view the Quick Specs for details: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEM31SF_EF_BM_FM_R2_17.pdf - Enjoy! SUEatGEA
A:AnswerHi tlccabinets - We encourage you to view the Installation Instructions at the following link for cutout and clearance requirements (See page 2): https://www.myapstore.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40782.PDF - GE® Optional 27" Built-In Trim Kit JX7227SLSS is compatible with GE Profile™ Series 2.2 Cu. Ft. Built-In Sensor Microwave Oven PEB7227SLSS. You can also view the Quick Specs at the following link: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227SL_BL_R2_17.pdf - Thanks for choosing GE. Keep in touch! SUEatGEA
A:AnswerHi Jamie- JX7227BLTS is Black Stainless Steel. The photo is incorrect. A website correction request will be sent to BestBuy. Thanks for reaching out to us! SUEatGEA
A:AnswerHi there, and thank you for taking the time to reach out to us. We appreciate your interest in a built-in look for this microwave; we regret any inconvenience this may cause, but this model number is designed for countertop use only. It cannot be converted to be built-in. We do have multiple other microwaves available that have built-in options. We are happy to help with any other questions or concerns you may have, including over social media if you need to reach out for any further information. All the best! -Sarah@GEA
A:AnswerHi DonW - We certainly appreciate your loyalty! GE Profile™ Series 2.2 Cu. Ft. Countertop Sensor Microwave Oven PES7227SLSS is intended for countertop use only. It is not compatible with a trim kit. The built-in model is GE Profile™ Series 2.2 Cu. Ft. Built-In Sensor Microwave Oven PEB7227ANDD. This model is compatible with GE® Required 27" Built-In Trim Kit JX7227SLSS and GE® Required 30" Built-In Trim Kit JX7230SLSS. See Quick Specs document for dimensions: https://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227ANDD_C2_18.pdf - Keep in touch at GEAppliances.com - Sue
A:AnswerHi - A trim kit is not available for model JES1657SMSS. This model is intended for countertop use.
We suggest our GE Profile™ Series 2.2 Cu. Ft. Built-In Sensor Microwave Oven
PEB7227SLSS. It is compatible with GE® Required 27" Built-In Trim Kit JX7227SLSS and GE® Required 30" Built-In Trim Kit JX7230SLSS. We encourage you to view the Quick Specs for cabinet cutout dimensions: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227SL_BL_R2_17.pdf - View all BUILT-IN MICROWAVE OVENS: http://products.geappliances.com/appliance/gea-category/microwave-ovens?TYPE=Built-In - Keep in touch! SUE@GEA