“What size wire does this take, I'm trying to find the amperage and this does not tell me the info”
Answer This Question
1-1 of 1 Answer
Hello- Thanks so much for your question. We are happy to help! You must use a single-phase, 120/208 VAC or 120/240 VAC, 60 Hertz electrical system. If you connect to aluminum wiring, properly installed connectors approved for use with aluminum wiring must be used. Note: Effective January 1, 1996, the National Electrical Code requires that new construction (not existing) utilize a four-conductor connection to an electric oven. When installing an electric oven in new construction, a mobile home, recreational vehicle or an area where local codes prohibit grounding through the neutral conductor, refer to the section on four-conductor branch circuit connections. Check with your local utilities for electrical codes which apply in your area. Failure to wire your oven according to governing codes could result in a hazardous condition. If there are no local codes, your oven must be wired and fused to meet the National Electrical Code, NFPA No. 70 – latest edition, available from the National Fire Protection Association. Please check our site for the complete installation instructions. We do not provide the AWG wiring size or gauge (the physical thickness of the wire) for those trying to wire their house for any cooking appliance. There are too many variables involved, such as: length, type of wire, etcetera. This is a safety issue; if the wrong size wire is used, the insulation covering the wire can overheat, melt and cause a fire. The power leads supplied with this appliance are suitable for connection to heavier gauge household wiring. The insulation of these leads is rated for temperatures much higher than the temperature rating of the household wiring. The current-carrying capacity of the conductor is governed by the wire gauge and the temperature rating of the insulation around the wire. We can't provide a link on through this format but if you'd like to reach out directly we can provide you with the link. We hope this is helpful. If you have any questions in the future, please let us know. we are here to help! Joyce@GEA
Sorry, there was a problem. Please try again later.