“I have a three way light that I turn on or off from two different switches. Would I have to replace both switches,if I use the GE model 12723 ?”
Answer This Question
1-7 of 7 Answers
12723 is not a standalone switch. It is only for three and four way scenarios. You must use a standalone switch (there are many to choose from) at the main switch and every additional switch will be one of these. Instead of a paddle add-on there is also a toggle add-on switch if you don't like paddles. Please read the previous questions and answers as this has been described several times.
Sorry, there was a problem. Please try again later.Yes, you need to replace both. One would be either an on/off switch or dimmer, and the second would be this ad-on switch.
I would recommend:
Sorry, there was a problem. Please try again later.Yes, you would have to replace both switches. One replacement switch would handle the load and turn on/off the light. I believe GE has two switches and two dimmers now for this. The second add-on switch (this product) would just trigger the primary switch. It cannot carry load and the primary switches only work alone or with an add-on switch. They don't work with another primary switch or a conventional three way or four way switch.
Sorry, there was a problem. Please try again later.Yes. You have to replace the main switch and then put an "add-on switch" for the other switch. The add- on switch is about half on the cost of the main switch.
Sorry, there was a problem. Please try again later.You have to replace one light switch with model 12722 and one light switch with the aux switch 12723. 12722 is a master, and the aux switch connects to it.
Sorry, there was a problem. Please try again later.Yes. You will have to replace both. You need a primary smart switch. If you're using Zwave technology then it'll be either 12724 (dimmer) or 12722 (non dimming switch) to control the light. Then you use the add-on switch in your question 12723 for the secondary location(s) for three or four way operations. 12723 by itself won't be any good.
Sorry, there was a problem. Please try again later.Yes you would need to replace both, but one would be a master switch and the other would be a slave. The slave is only $20 i believe. You then also have to run your travel wires through your neutral, but the switch comes with clear instructions.
Sorry, there was a problem. Please try again later.
