A:AnswerThank you for your interest in our mounts. The PDX650 weighs 22.5lbs, and the shipping box weighs 24.7lbs. I hope that helps, if you have any other questions please feel free to contact us directly through the support tab on our website.
A:AnswerRAM, your TV is under the weight capacity of the PDX650 and has a compatible 200x200 VESA pattern (bolt pattern). Should work without any issues! Contact us directly using the support button on our site if you need help with anything else, thanks.
A:AnswerHi, there is 9.1" between the top lag bolt slots and the bottom slots. Feel free to contact us directly at [email protected] if you have any other questions, thanks.
A:AnswerChase10, The Vizio D65u-D2 is under the weight capacity of our mount and has a compatible 400x400 VESA pattern (bolt pattern). Should work great with our PDX650! Contact us directly using the support button on our site if you have any other questions, thanks.
A:AnswerCarGo,
You shouldn't have any issues using our mount with your TV but keep in mind you may have to use longer bolts at the top of the TV and short bolts at the bottom. This is due to the design of the TV which is thinner at the top and wider at the bottom. Contact us directly using the support button on our site if you need help with the installation, thanks.
A:AnswerThe maximum VESA spacing our PDX650 can handle is 600x400 so your TV should work without any issues. Contact us directly using the support button on our site if you have any other questions!
A:AnswerMichael,
The PDX650G is for outdoor use and the standard PDX650 is for indoor use. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks!
A:AnswerYour TV has a compatible 300x300 bolt pattern and is under the weight capacity of our PDX650. Should work fine, but there's a chance the horizontal supports on our mount may cover some of the legacy inputs such as component, RCA, and coaxial. If you're only using HDMI it will work great! Contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerGopack2,
When fully retracted the rear of your TV will be 2" away from your wall. If you have any other questions feel free to contact us directly using the support button on our site, thanks.
A:AnswerYour Sharp TV is compatible with the PDX650 but dual stud mounts don't work that great in this type of situation since the wall plate doesn't get very close to the corner. I'd suggest the M300 or PS350 as you can get the articulating arm closer to the corner. Contact us directly using the support button on our site if you need additional clarification, thanks.
A:AnswerPat,
The XBR-75X850C weighs about 80 lbs has a VESA pattern (bolt pattern) of 400x300. Our PDX650 can hold up to 125 lbs and will accept a 400x300 pattern with no issue. Your TV should great great with our mount! Feel free to contact us directly at [email protected] if you have any other questions, thanks.
A:AnswerIf you could please email us directly at [email protected] and pass along your TV's full model number and we would be happy to determine compatibility for you.
A:AnswerIf you could please email us directly at [email protected] and pass along your TV's full model number and we would be happy to assist you further with this.
