Is the power cord for the dryer a 3 prong or a 4 prong null

The dryer should be connected to a 4-hole outlet. The dryer has its own terminal block that must be connected to a separate 240 VAC, 60-Hertz, single-phase circuit, fused at 30 amperes (the circuit must be fused on both sides of the line). Electrical service for the dryer should be of the maximum rate voltage listed on the nameplate. Do not connect the dryer to 110-, 115-, or 120-volt circuit. Use a 30-amp, 240-volt, 4-wire, UL-listed power cord with #10 AWG-minimum copper conductor and closed loop or forked terminals with upturned ends. ^Daphane

“Is the power cord for the dryer a 3 prong or a 4 prong”

Asked by SamAdams 4 years ago

Answer This Question

See all questions & answers

LG - 4.5 Cu. Ft. HE Smart Front Load Washer and 7.4 Cu. Ft. Electric Dryer WashTower with Steam and Built-In Intelligence - Graphite Steel-Front_Standard

Save $900

$2,699.99

1-1 of 1 Answer

The dryer should be connected to a 4-hole outlet. The dryer has its own terminal block that must be connected to a separate 240 VAC, 60-Hertz, single-phase circuit, fused at 30 amperes (the circuit must be fused on both sides of the line). Electrical service for the dryer should be of the maximum rate voltage listed on the nameplate. Do not connect the dryer to 110-, 115-, or 120-volt circuit. Use a 30-amp, 240-volt, 4-wire, UL-listed power cord with #10 AWG-minimum copper conductor and closed loop or forked terminals with upturned ends. ^Daphane
Answered by LG Digital Customer Care 4 years ago
Sorry, there was a problem. Please try again later.