A:AnswerPlease reach out to our support team on Facebook at @LGUSSupport and use #VOC in your first message to our social media support team. Please be sure to provide your name, phone number, address, email, model/serial numbers, and date of purchase and we will be happy to assist you. There are policies and procedures in place to ensure resolutions are consistent and fair. I am confident that we will work to provide an agreeable resolution.^Venette
A:AnswerPlease reach out to our support team on Facebook at @LGUSSupport and use #VOC in your first message to our social media support team. Please be sure to provide your name, phone number, address, email, model/serial numbers, and date of purchase and we will be happy to assist you. There are policies and procedures in place to ensure resolutions are consistent and fair. I am confident that we will work to provide an agreeable resolution.^Venette
A:AnswerWKG101HVA has a cord for the washer which has to be plugged into a standard 120V, 60Hz outlet and a cord for the dryer that has to be plugged into a 240V, 60Hz outlet. The dryer should be connected to a 4-hole outlet. The unit will need two outlets. One for the washer and the correct outlet for the dryer. ^Daphane
A:AnswerThis dryer is equipped with a three-prong grounding plug for protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. The cords on washer/dryers is typically 6-8 feet. ^Daphane
A:AnswerThere are no tutorials or installation manual for LP conversion. The owner's manual states conversion should be installed by a qualified technician. You can try reaching out to to our technical support team for further assistance via private message on Facebook @LGUSSupport and use #VOC in your first message to our social media support team or call at 800-243-0000. Also, be sure to provide your contact information, model/serial numbers and date of purchase. ^Daphane
A:AnswerI am not sure what you mean by space saver. Use only 4 '' (10 cm) rigid, semi-rigid or flexible metal ductwork inside the dryer cabinet and for venting outside. Rigid, semi-rigid or flexible metal ducting is
recommended for use between the dryer and the wall. All non-rigid metal transition duct must be UL-listed. Use of other materials for transition duct could affect drying time. For further assistance, please reach out to our technical support team via private message on Facebook @LGUSSupport and use #VOC in your first message to our social media support team or call at 800-243-0000. ^Daphane
A:AnswerThe can be vented to the left. Right side venting is not possible on gas models. When facing the front of the unit the vent would be on the right. The side venting kit is part 3911EZ9131X, https://www.lg.com/us/laundry-accessories/lg-3911ez9131x. ^Daphane
