A:AnswerPlease reach out to our support team via private message on Facebook @LGUSSupport and use #VOC in your first message to our social media support team or call at 800-243-0000. Also, be sure to provide your contact information, model/serial numbers and date of purchase. ^Daphane
A:AnswerWhat are the exact distancea from outer edges of feet?? Very important question!! because many people will need to know what size pan the washer will fit in. LG really needs to list exact distance from outer edges of feet as part of normal specs for EVERY machine. Please don't make us go hunting around on social media trying to get answers from other customers.
A:AnswerThe washer dimensions are 27"W x 39"H x 30-1/4"D. For complete dimensions for this unit, please see the link to access the specification sheet, https://www.lg.com/us/support/products/documents/WM3400CW_Spec_Sheet.pdf. ^Daphane
A:AnswerThe electrical plug is a standard 120V plug. The unit can drain into a sink. Water supply pressure must be between 20 psi and 120 psi (138 - 827 kPa). If the water supply pressure is more than 120 psi, a pressure reducing valve must be installed. For further assistance, please reach out to our support team via private message on Facebook @LGUSSupport and use #VOC in your first message to our social media support team or call at 800-243-0000. ^Daphane
A:AnswerLG does make stands for their washers and dryers. I have a 27" wide model and apparently their stand model #WDP4W stand will fit my washer and dryer but I decided it wasn't a good value at $225. Best Buy does stock this stand but you'll probably want to check with them to see if it will fit your model. You could also go to the LG website, look up your appliance model number and they will show you the related products that will fit. Hope it helps.
A:AnswerThis washer can be stacked with the matching dryer for washer model WM2487HRM. Please provide your dryer model number so that I can confirm compatibility for the units to be stacked. Thank you. ^Daphane
A:AnswerThe dryer has its own terminal block that must be connected to a separate 240VAC, 60-Hertz, single-phase circuit, fused at 30 amperes (the circuit must be fused on both sides of the line). Electrical service for the dryer should be of the maximum rate voltage listed on the nameplate. Do not connect the dryer to 110, 115, or 120-volt circuit. Use a 30-amp, 240-volt, 3-wire, UL-listed power cord with #10
AWG-minimum copper conductor and closed loop or forked terminals with upturned ends. ^Daphane
A:AnswerWhile there will be some interchangeability in washer and dryer models across the same brand, you will not be able to stack laundry units from two different brands. ^Daphane
A:AnswerWhile there will be some interchangeability in washer and dryer models across the same brand, you will not be able to stack laundry units from two different brands. ^Daphane
