I thought that each point would provide 1600 sq ft so the total with package should be 5400 sq ft is that correct? null

Question

Nest Support · Accepted Answer

Ideally, one Nest Wifi router can cover up to 2200 sq ft, while a Nest Wifi point can cover up to 1600 sq ft. However, the strength and speed of signal will depend on your internet provider and the location of Nest Wifi. The layout of your house, and physical obstructions like furniture, doors and walls can impact the total coverage and speed.

Answered by Nest Support 5 years ago

Paul · Answer

As with any wireless transceiver device, the details do matter, so while it may optimally cover 5400 square feet from the specs, the details of the distances between the main router and the mesh points matter, the details of the walls and appliances and "stuff" between the units matter, and transmitting through floors or ceilings matters to the signal strength also. An ideal configuration would have the router in the center and the two mesh points in opposite directions to cover an optimal area on a single floor. If you cannot or do not want this, as I could not, you may find challenges from the layout that impede the coverage area and force the nodes either closer together, or in some other arrangement to allow for a stronger signal between the mesh nodes and the main router unit. In my case, I could not position one mesh node on the floor below the router due to signal strength challenges, so had to keep one of the nodes on the same floor as the router. The node transmits well to the floor below, so I still have strong signal, but during the setup, the configuration would not support putting a mesh point downstairs.

So, the details matter, regardless of what mesh system you choose. Systems with dedicated back channels between the mesh nodes and the router are stronger in this aspect, but still have issues. The Google Nest does *not* have a dedicated back channel design, but is a solid performer overall. I would suggest asking the Geek Squad for their perspective regarding your specific configuration details to see if they have suggestions.

“I thought that each point would provide 1600 sq ft so the total with package should be 5400 sq ft is that correct?”

1-2 of 2 Answers