“I have a DVR which gets its signal via a coaxial cable then connected to the TV via a HDMI cable. I also have a DVD player connected to the TV via a HDMI cable. I also have a Amazon Cube which I can't connect. How do I wire everything using this product?”
Answer This Question
1-1 of 1 Answer
Hi Donald, SETTING UP YOUR HDMI SWITCH: 1 Connect HDMI cables from your source devices to the switch’s input ports. 2 Connect an HDMI cable from your TV (or projector) to the switch’s output port. 3 Connect the power adapter from the DC 5V port to a power outlet. The power LED and an input LED light up. Note: To fully support 4K resolution, connect the input and output channels using HDMI Premium Certified cables 9.6 ft. (3 meters) or less in length. Optional wall-mounting: Install two screws 4 in. (10.2 cm) apart into your wall, then hang the switch on the screws. Mounting hardware is not included. USING YOUR HDMI SWITCH: 1 Turn on your TV and the source device. 2 Turn on your switch by pressing the POWER ON/OFF button on your remote control or pressing the (power) button on your switch. Note: When the switch is turned on, it automatically switches to the last input that was used, unless Auto Switch is turned on. If Auto Switch is on, the switch goes to the device that is turned on. 3 To select a source device: • Press the number on your remote that matches the input of the source device you want. OR • Tap the number on your switch that matches the input port that your source device is connected to. The corresponding input LED lights. 4 Use your source device as usual to play video and audio. 5 When finished, press and hold the (power) button to turn off your switch. Note: You may leave the power on while not in use Rocket fish Support Irene https://www.bestbuy.com/site/brands/best-buy-brands/pcmcat1596746025285.c?id=pcmcat1596746025285
Sorry, there was a problem. Please try again later.