A:AnswerYes, this stand should be compatible with your specific TV. This mount can support your TV's 400x400mm VESA pattern and your TV is under the mount's 150lbs weight limit.
Thanks,
- Haydn @ SANUS
A:AnswerThe main difference is the depth of mount. The BLT2 has a depth of 2.75" vs the BLT3 which has a depth of 2.10". They do not use the same mounting plate. The mounting plate for the BLT3 is a little over and inch longer and wider.
Thanks,
- Haydn @ SANUS
A:AnswerThe height is mostly dictated on the brackets you place on the TV. You can easily take the TV down and move the brackets up and down. The wall mount is fixed once it is installed on the wall. There are also leveling adjustment that has some vertical movement.
A:AnswerIt will depend on the size of your TV's VESA pattern. See link below to our tech drawing for a visual reference.
https://www.sanus.com/assets/products/blt3/documents/BLT3_TD_210720.PDF
Thanks,
- Haydn @ SANUS
A:AnswerThe pitch should be 1.25mm. Not totally sure about the diameter size as I am unsure of what size you need. Do you need M6, M8 and do you know what the length of the bolts that were lost are? If you need more assistance please give us a shout at [email protected] and please provide your TV model number and we can help ya out to find the correct size screws for your TV!
Thanks,
- Haydn @ SANUS
A:AnswerIts only rated for upto 90", with that said, i would check your TV's vesa mount specification and weight, if its within limits i would imagine it would work as long as you leave some room for buffer and not use it near its specified limit.
A:AnswerNo studs should be 32” apart. Max gap you should find would be 24” on and interior wall. Anything larger would be a code violation. If you are finding 32”, most likely you have 16” spaced studs.
A:AnswerThe frame is 31.3" x 16.60" below is the link to our tech drawing for a visual reference.
https://www.sanus.com/assets/products/blt3/documents/BLT3_TD_210720.PDF
Thanks,
- Haydn @ SANUS
A:Answerthere ARE TWO SPRING LOADED CLIPS ON THE BRACKET THAT IS ATTACHED TO THE TV. jUST PULL THEM SO THE TV IS RELEASED FROM THE BRACKET. THERE ALSO ARE INSTRUCTIONS IN THE PAPERWORK.