A:AnswerGood Day,
Yes! This mount is designed with an opening so you can fit your electrical outlet right inside the wall plate. The opening is just under 7", so make sure to do some measurements but you should be all set. Let us know if you need anything else.
Thanks!
Jake @ SANUS
A:AnswerThe Sanus mount has built in adjustment screw on both the left and right brackets. The kit comes with a 14" long hex wrench so it is easy to get on a ladder, get above the TV, put the hex wrench into the adjusting screw and adjust left or right bracket until it is level. I also found that this adjustment came in handy when I mounted a sound bar under the TV. After putting the sound bar under the TV I was able to lower the TV using the long hex wrench in the adjustment screws, so that there was no space between the two, for a very sleek, custom look. So even if you don't place the wall bracket on the wall so it is level, you can come back and level the TV using this neat feature.
A:AnswerYes it has plastic inserts that fit concrete installs. You will need a masonry bit and hammer drill for the drilling the hole. A drill that does not hammer will not work the hole needed is 1/2" diameter. The anchors hold very well as they set deep and the Bolts are stout, but I added a coating of liquid nails to ensure they would not pull out during adjustments of my large TV. All works well.
A:AnswerActually, this will work with the hole pattern you asked about. This mount extends 5.75" and retracts back to 1.75". Let us know if you need anything else!
A:AnswerThe mount will fit the TV, yes, but the spacers that come with the mount will not fit the inset holes on the back of that TV. This seems to be a common problem. I have mounted numerous TVs, each with a different mounting kit. Every single time I run into the issue of not having spacers small enough to fit the inset holes.
