A:AnswerYes. It’s exactly why it was purchased. To boost WiFi to remote camera.
Just make sure there is a clear line of sight from the unit to the camera otherwise you get a choppy, interrupted pucture.
A:Answertp-link website shows their different country websites where you should be able to find your correct configuration. It does not say what you're looking for in the product info I have.
A:AnswerFor full OneMesh compatibility and features, the RE505X must be used in Range Extender Mode. That being said, you can still use the device in Access Point Mode and configure it with the same SSID/password as your router; however OneMesh features will not be active.
A:AnswerWi-Fi coverage will depend on numerous variables, including, but not limited to:
- Placement of the extender
- Physical obstructions (e.g., walls, etc.) between the extender and your devices
- Distance between the extender and your router
- Distance between the extender and your devices
- Which Wi-Fi band you are connecting to (2.4GHz vs. 5GHz)
A:AnswerHi! No, the extender can only be connected to one host network at a time, via either Wi-Fi (2.4GHz, 5GHz, or both), or via Ethernet in Access Point Mode.
A:AnswerIt's rated at 1500 sq. ft. of coverage, so probably not, especially if your source is at one end and you want to use it as the other. It IS mesh-compatible, however, which is probably the way to go.
