“I’ve been trying to set this switch up to my night hawk mesh wifi for weeks now. The switch seems to want to reset itself to a blinking orange light. How do I fix this?”
Answer This Question
1-4 of 4 Answers
Contact their support (good luck!) for an exchange
Sorry, there was a problem. Please try again later.Do you have it plugged in to a socket that turns on and off with a light switch!? This could be the problem every time you flip the switch it could reset if not I recommend returning and purchasing globe brand.
Sorry, there was a problem. Please try again later.We ran into a similar(ish) issue. We got a new router, updated all the firmware for both the plugs and router… and then all the plugs started blinking orange. They would still work 95% of the time, but kept blinking orange. Couple of things we did; One thing I found from the Belkin support site was “ To solve the problem, change the channel and SSID on your access point or router. Preferred channels to use are 1, 6, 9 and 11 since they're considered as non-overlapping channels.” but I also had to reset my router after the firmware update. After doing both of those things our Wemo plugs are much happier. Not sure if there is a way to check the Nighthawks settings like that but maybe one of our trials may help.. I was able to find quite a few good reads on their support site. https://www.belkin.com/us/support-article?articleNum=7960
Sorry, there was a problem. Please try again later.Hi! Please send us an email at [email protected] with your contact details and the link to this post so we can have this setback checked.
Sorry, there was a problem. Please try again later.