1-4 of 4 Answers
I see another purchaser said "It will require holes drilled into the soundbar" Don't drill into the soundbar! There are mounting slots on its bottom, about 8" from each end. Tape the mounting template to the wall (leveled), mark drill-hole locations on the WALL, remove the template & drill holes in the WALL. Attach mounting hardware (not included) securely to the wall, using the holes you drilled. Align the factory made slots on the bottom of the soundbar to the heads of mounting brackets you just attached to the wall. The soundbar should drop less than half an inch on the bracket heads so it doesn't pull straight off. To remove the soundbar from the wall brackets, lift it while pulling towards you as you lift. It should hang and remove pretty easily.
Sorry, there was a problem. Please try again later.1. The soundbar can be mounted beneath the TV using a soundbar mount. It will require holes drilled into the soundbar 2. Using the soundbar attached to the bottom of the TV and an articulating mount is the best way to direct the sound
Sorry, there was a problem. Please try again later.In order to attach the sound bar to the tv you will need to purchase an additional mounting kit. If you will be significantly moving the viewing angle of the tv then it would be advised to have the sound bar move with it. If it is only a few inches then don’t worry about it.
Sorry, there was a problem. Please try again later.I would have to refer to the instructions that come with the unit.
Sorry, there was a problem. Please try again later.
