“This AVR has 100 watts per channel into 8 ohms (20-20,000 Hz) at 0.06% THD, with 2 channels driven. Does this receiver have enough power to run: (2) RP8000F Towers 600w [Front], (1) SPL-120 12” 300W [Subwoofer], (1) RP 404C [Center], • (2) RP 600Ms?”

1-2 of 2 Answers

• Yes. You tube this model and you can see your same setup hooked up to a dyno. It pumped out 200 watts.

  Answered by AJAbelson 4 years ago

  • 

  Helpful (8)Unhelpful (1)

  Report

  Sorry, there was a problem. Please try again later.

• The spl120 is a powered sub so the watts of this receiver won't make a difference. The center and rears you have, have high sensitivity and should work well with this receiver. Your towers are monsters. l'd probably use the front preamp outs and biamp 2 yamaha A-S301's to those, or 1 A-S701 (but two 301's are cheaper and you get more power). Plus if you use an external amp for the fronts you'll get more power to the rest of your channels running of the AVR.

  Answered by Dave 4 years ago

  Helpful (3)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.