Main Content

Customer Ratings & Reviews

Insignia™ - 5.6 Cu. Ft. 2-Tap Beverage Cooler Kegerator - Stainless steel-Angle_Standard

Customer rating

Rating 4.4 out of 5 stars with 319 reviews

93%
would recommend to a friend

Pros

Cons

Customer ratings & reviews

Filter:
Page 1, showing1-20 of 319 Reviews
  • Rating: 4 out of 5 stars

    Solid Kegerator

    Posted
    Tyler

    Don't get me wrong, it pours beer and looks nice but it’s not perfect. Below are some “First World” problems/comments/fixes 1. The instructions are absolutely awful and there are no videos online on how to assemble. Most of it is common sense but as to where or if a gasket is required who knows. I put a gasket where the beer and co2 lines attach to the keg. You will have lots of extra parts leftover. 2. I had no leaks in my beer and co2 lines but my friend did. Probably has to do with number 1. Before you tap your beer, open your co2 bottle and with a soapy water solution check for leaks. Tighten what you need to make it go away. If you don’t do this is will wake up the next day with a dry co2 tank and depending on #6 you could be really screwed. 3. The co2 regulator is the cheapest model you can buy. It doesn't tell you your input pressure (the pressure in your tank). This is important so you know if your co2 pressure is low and needs replacement. Since it is a single regulator, you can’t have two different beers that require different pressure on tap at the same time (well technically you can but they don’t play nicely together and you will not enjoy it.) What I recommend you upgrade to is a dual tap co2 regulator. They sell them at kegworks and amazon for about $95. They fit inside no problem, have individual shut offs, and work sooooo much better. 4. Although it states it doesn't fit miller and coors kegs, it does only if you get the non-rubber topped ones. The rubber is similar to a non-skid truck lining on top and makes it too tall to fit in your kegerator. I always bring a measuring tape with me to make sure. 5. You will get a lot of foam on your first pour and if there is a long wait between pours. This is because your beer lines that are in your dual tap tower are warmer and as the beer passes through you get significant foaming. Don’t worry! This is common on all types of tower kegs. This is how you fix it: a). Just keep pouring beer so the lines never get warm or b). buy a kegerator tower cooler off of amazon for about $50. Route it through your external co2 line and plug it in the wall. Works great. 6. Your 5 lb co2 tank ships empty. Start looking for places the fill co2. Some have a 1 week turnaround so you may want to buy another 5 lb tank on amazon and keep them cycling. Also don't be scammed when you fill it up. 99.99% of co2 is food safe co2, most companies market it as such just to increase the price. 7. This is a good kegerator if you get it for a good price. The good price will allow you to do some upgrades. I was able to get mine for $425 with free delivery due to a sale on appliances at Best Buy. I purchased it on father’s day. You can use a 20% off coupon and get a discount too. 8. This will not "save" you money on beer. If you don't believe me do the math. The only way you could possible save money is to buy full kegs, run only 1 tap, and only drink domestic beer. It more of a cool novelty and an easy way to make more friends.

    I would recommend this to a friend

  • Rating: 4 out of 5 stars

    Nice mid-level kegerator

    Posted
    ThomasK
    • Verified PurchaserVerified Purchase
    • My Best Buy® MemberMember

    The kegerator arrived in a reasonable amount of time... or should I say that the wrong one arrived in a reasonable amount of time. Getting Best Buy to correct their error and get the right one shipped out was a rather challenging adventure involving numerous calls with long wait times and support staff that seemed like their priority was getting me off the phone and out of their hair. Ultimately, it seemed that a few FaceBook posts on the Best Buy site is what had the most impact in getting the issue straightened out. In the long run, the first (incorrect) kegerator arrived 1 week after ordering and the replacement (correct) one arrived 10 days after that. The final (correct) kegerator arrived with the box a little beat up with a few holes punched in it and upon unpacking I found the Styrofoam packing on the corners and the bottom to have been broken a bit but there was no apparent damage to the kegerator and, after all, that is the important part. Assembly took about 40 minutes and there were instructions (in english) enclosed which listed the parts and how they were to be assembled so the assembly went well and without any hitches. When installing the wheels, I did note that there were numerous other screws on the bottom the cooler that were very loose and required re-tightening and a couple were put in crooked to begin with which made them a bit harder to really tighten down so be sure when assembling, plan on checking all other screws you see even if not directly related to the assembly itself. The CO2 and the tap lines are all overly generous with respects to the length to whit I'll most likely be trimming them back once the unit is in full use so there's not an excessive amount of excess lines to mess with. While there is a bracket which can be attached to the back of the cooler to hold the CO2 canister I opted to use the small shelf in the interior to set the CO2 canister on, thus allowing me to get the cooler as close as possible to the wall and not stick out too far. Once assembled, even with the CO2 canister inside, I was able to fit two standard 1/4 barrel slim kegs inside and the door still closed easily and completely. Using at least one 1/6 barrel slim instead of one of the 1/4's then allows enough room to place an additional six-pack or 3 (if stacked) or a bottle or two of some other beverage. Overall, this seems like a nice enough unit. It's running quietly and keeping the beer nice and cold. My primary reason for scoring it 4 out of 5 stars is primarily due to the 'plastic-y quality' that it has. The drip tray and top grate are plastic as is the top of the cooler. Even after tightening the tower screws as much as I dare, you can still move the top of the tower back and forth about a half inch or so. You dare not even consider putting any sort of heavy weighted items on the top - especially near the front as you can easily press down on the front center of the top and see the plastic top sag under the weight. So, just keep in mind that this is a residential unit and not really meant for any sort of commercial or heavy use. The old unit I replaced was sturdy enough to where I had no second thoughts of jumping on top to reach the ceiling if I needed to but this unit I wouldn't even consider doing that with. I paid $419 for mine (supposedly on sale from $549). The $419 I would pay, but at $549 I would consider it to be overpriced for the quality of the unit.

    I would recommend this to a friend

  • Rating: 4 out of 5 stars

    Great but not perfect...

    Posted
    TexasJim
    • Verified PurchaserVerified Purchase
    • My Best Buy® MemberMember

    I feel compelled to share my experience, especially after reading the Q&A section regarding use of 2 kegs in the cooler. The instruction book shows the following in regards to which kegs can fit inside. If you are unsure of what these look like, go to kegerator.com and look up keg sizes to see accurate pictures. 1. You can fit only (1) 1/2 Barrel Keg (typical size almost all bars and restaurants use for on tap beer) 2. You can fit (2) 1/6 Barrel Kegs 3. You can fit (1) 1/4 Barrel Slim and (1) 1/6 Barrel Keg 4. You can fit (1) 1/4 Barrel (Pony) which is short but wide ***5. You can fit (2) 1/4 Barrel Slim Kegs (Take note - the gasket does not make full contact and is roughly 1/4 inch from closing. I personally used duct tape in 3 areas (bottom,middle,top) and this is keeping the door completely closed and sealed). Obviously, I can't store mugs or glasses inside anymore because I'd rather keep (2) 1/4 Slim kegs than (1) 1/6 and (1) 1/4 keg and some mugs mainly because your beer selection opens more when you go up to the 1/4 size kegs. If the manufacturer used just a bit more material and made the depth maybe a 1/2 inch deeper, 2 would fit and the door would close no problem!! **** Besides this, the only thing I am having issues with are the faucets. If you go a few days without any pours, they seem to "seize" up and it takes a bit of strength to get them to "break" open to allow you to pour beer. For me, I have it set to level 5, but I also built a small air box inside to circulate the air. Once I put this custom box inside with USB Fans, it helped out a lot! I hope this helps someone, because between reading reviews and the Q&A, there didn't seem to be accurate details on this. Other than what I mentioned above, I must say that as if having beer at home, didn't make us lazy before, having a kegerator takes our laziness to a whole new level. The fact that I can just grab a mug and fill it up, makes me feel super lazy, but I love it! Hope this helps everyone reading!

    I would recommend this to a friend

  • Rating: 5 out of 5 stars

    Great Kegerator! Great Price!

    Posted
    Brian584
    • Verified PurchaserVerified Purchase
    • My Best Buy® Elite Plus MemberElite Plus Member

    I do home-brew and have done a lot of research to try to find a good kegerator for my home-brew. This one did everything I wanted and was the best price, even better than the one Costco carries. If you want to use for home-brew you will have to buy some adaptors to fit it to your home-brew (corny) kegs. I spent about $30 at my local home-brew store getting everything I needed to convert it. This kegerator is a great combination of reasonable size and lots of inside space. First off you can easily fit 2 corny kegs and have room for a few 6 packs or what I do is keep about 8 chilled mugs ready for serving. I plan to add a third tap at some point because there is enough room (barely) for 3 corny's or 2 full corny's and one smaller keg you can set on the shelf where the CO2 tank goes (I keep my CO2 tank on the outside). There are 4 nice caster wheels on the bottom that make moving it around easy, 2 of them lock to keep it from moving around. Overall I highly recommend this! I got it on a deal of the day for under $400 and it shows up on deal of the day every once in a while. There is a single tap one also if you only want one type of brew but I highly recommend the 2 tap so you have the option of multiple brews.

    I would recommend this to a friend

  • Rating: 2 out of 5 stars

    Terrible Experience

    Posted
    JPV2
    • My Best Buy® MemberMember

    To start, the first unit shipped was dented. Returned it and got a new one. After a week, one of the faucets started leaking and a month later, the diaphragm blew on the co2 regulator. I checked the faucet and found an o-ring was damaged, causing the leak. Fortunately, both of these issues are easy to fix, assuming you know the o-ring size and regulator model. Unfortunately, I couldn't find the correct size o-ring after searching for months and the regulator has no brand/model identification on it. I really didn't want to go through the hassle of returning it again for what should be quick, easy fixes, so I contacted Insignia. You would think, seeing as how they manufacture the item, this should be simple. I received a response saying that's not something support could answer and they would have to reach out to engineering. I was told it would take 3-4 weeks to get an answer. Really? Whatever, I already went this long, what's another month. Six weeks later I got a response telling me thread sizes which didn't help. I sent a reply explaining I was given the wrong information. A week later they responded saying they had to reach out to the engineers again. After 4 weeks more and no response, I emailed asking what the hold up was. I was then sent an email recommending I just return the item for a new one. This would require me renting a truck to get it back to best buy all because of an o-ring. Not an acceptable answer. There's no reason for them to not know what parts are needed. Especially parts that may need to be replaced at some point in time.

    No, I would not recommend this to a friend

  • Rating: 5 out of 5 stars

    Very happy, works great. Planning some upgrades

    Posted
    DannoT

    I am replacing a single tap micromatic kegerator. This was a great price and was delivered faster than promised. Packaging was good and after reading some of the reviews, I made sure there were no scratches or dings and there were none. The unit is nice looking and looks like great quality. Assembly was easy and all parts were there. Instructions we not the greatest, but I was able to get it done. I had to exchange my CO2 tank for a full one (cost only $15.00) at the local welding supply store. Sad to see my shiny new tank go, but I mounted the tank inside the fridge, so no one sees it. I added a second gauge from Amazon ($12.00) to the regulator that monitors the tanks pressure. I do not want to run out of gas on a Friday night and this was much cheaper than buying a second CO2 tank. So far I am getting a little foam when I pour the first beer off each line, so I am planning on getting longer lines for the taps. From everything I have read online, a tower cooler and longer beer lines are the only way to reduce this common issue. Two 5 gallon slim kegs fit with plenty of room to spare.

    I would recommend this to a friend

  • Rating: 4 out of 5 stars

    Good value for the money

    Posted
    TEKSvcs
    • Verified PurchaserVerified Purchase
    • My Best Buy® MemberMember

    I'm purchased this kegerator to replace an older model which finally went kaput and one with which a new compressor alone would have run as much as this new unit. This new Kegerator was delivered in soundly (no damage) even though there were a few rips and holes in the exterior box. I was able to assemble the kegerator in about 45 minutes without running into any issues. I did notice that some of the screws in the bottom of the unit were really loose so I would suggest to everyone to not only assemble what you're supposed to but to check all other fasteners as well for proper assembly. In the unit I received, once assembled, I was able to fit 2 standard 1/4 skinny kegs. Putting in 1, 1/4 and 1, 1/6th keg even left enough room for a stack of 6-packs to keep cool at the same time. The unit is nice enough overall and a good value for the price paid ($419) which was the sale price. At the full price, I would not have purchased it. Quality wise, let's just say, it's not a commercial grade unit. My older unit was and I have stood on it many times to get something off an upper shelf. With this unit I wouldn't dare try. The top surface is plastic and has a good amount of give to it with even a slight amount of weight placed on it. The tower, fastening to this plastic top also has a bit of give and when pulling on a tap handle pulls the tower forward a bit as well. So... if buying this unit, I believe you'll be pleased with it as long as you understand that you're getting a residential quality unit and you'll need to be 'nice' (gentle) with it.

    I would recommend this to a friend

  • Rating: 3 out of 5 stars

    Good quality overall, problems with Thermostat

    Posted
    Mike
    • Verified PurchaserVerified Purchase
    • My Best Buy® Elite Plus MemberElite Plus Member

    The unit appears to be of good quality overall, and suitable for my needs as a home brewer. When the unit arrived I plugged it in and set it to max cool as instructed for the first 48 hours. The unit appeared to be operational, and at that time I discarded the original packaging. What I did not realize was that the unit's internal thermostat was not operational. The unit compressor continued to run continuously regardless of where the thermostat was set to, with the exception of off. The end result was frozen beer. I contacted the manufacturer for guidance. They referred me to Best Buy for return instructions. I wanted to arrange an exchange, a new unit sent out, and I would use the original packaging to facilitate returning my defective unit. The problem I ran into was the product appeared to discontinued, with no inventory remaining in the Best Buy system. This left me with the option of trying to cobble up some packaging on my own to return the unit, or keep the defective unit. I opted for keeping the defective unit, and using it in conjunction with a sensitive temperature controller. This works well, but cost me around $80 for my work around. If I ever want the thermostat fixed, it appears that will be on me.

    No, I would not recommend this to a friend

  • Rating: 4 out of 5 stars

    Nice tap for two beverages

    Posted
    OgreMama
    • Verified PurchaserVerified Purchase
    • My Best Buy® Elite MemberElite Member

    We've been pretty pleased with our 2-tap Kegerator. My husband is a hard cider drinker and I like beer, so 2-taps allows us to both have our favorite beverages ready to dispense. We found it relatively easy to assemble the hardware. It comes with an optional set of casters for the bottom, so you can wheel it around. The hoses and taps all look to be of good quality. It's nice that they provide a away to mount the CO2 tank on the outside as well as the inside of the fridge. The temp setting is a bit fussy to set and you'll need to provide your own thermometer. But once you figure out where to set the dial, it stays pretty close to that temp. TIP:// Have it shipped to the store for pick-up. It gets palletized for shipping. If shipped to your door, it does not and will likely show up damaged. Our friends had theirs shipped to their house and both times, it arrived with major shipping damage.

    I would recommend this to a friend

  • Rating: 5 out of 5 stars

    Get it shipped to store

    Posted
    Jonryb

    Works amazingly. I have two 1/6 kegs currently on. Was nervous if they would fit because one of the breweries near me have an oversized sixtel that they sell but it fits fine. Super quiet. Don't even know it's there. No problems with the thermostat. Bought a digital thermometer on Amazon for 10 dollars so I can dial the perfect temperature in. The only problem I had was I had it shipped to my house the first time and it came all busted up with dings and dents. That would of been fine but the door hinge was broken and I couldn't fix it without the part. Called insignia and they told me to bring it back to bestbuy. It was a pain but I managed to lug it over there. Bestbuy had a new one for me in two days and I had it shipped to the store instead. Way better idea. No problems whatsoever. Will probably upgrade the lines in the future to make them longer. Also might need a nitro tap soon. The co2 fits inside with the two kegs no problem. Good craft beer by me is 100 dollars per keg but the same stuff sells for 12 dollars for 4 16oz cans so it saves a lot of money in the long run. I highly recommend this is you are a craft beer lover. Oh and wait for a sale. I got it for 450 for the Labor Day sale. Save up for the dual tap. It's totally worth it.

    I would recommend this to a friend

  • Rating: 2 out of 5 stars

    Spend the Money on a better kegerator

    Posted
    Adam
    • My Best Buy® Elite MemberElite Member

    I've had this kegerator for about a year and a half now. I've had so many problems. They used cheap parts and it became apparent quickly. The beer has never poured well. The taps are forward sealing, so if you didn't use the kegerator for a week or two they would be very hard to open. If it sat a month without being used, it seized up and wouldn't open. I upgraded the taps and then the beer poured even worse because the cheap shanks won't work with good valves. I've had to deal with a couple leaks on the CO2 lines. BTW, you have to upgrade those if you ever just have one beer on tap since the original installment doesn't have a splitter that you can close off to one side. I was a novice when I decided to buy this. Big regrets for not spending a bit more money to get a good kegerator. Save yourself the trouble and spend a bit more to get one from a well-known brand.

    No, I would not recommend this to a friend

  • Rating: 3 out of 5 stars

    Could be great

    Posted
    JonnyAbs
    • Verified PurchaserVerified Purchase
    • My Best Buy® MemberMember

    This is a big heavy box that was delivered. I trucked it down to the basement and unboxed it and while putting together, I realized that the draft assembly arm was chipped up and missing paint. This is the metal tube that contains the beer lines as they come out of the fridge and connect up to the taps. This was not used because it was packed perfectly, which is impossible to replicate. So it must have been damaged in the factory and still packed together, which is a shame. I tried to get a replacement arm, but they said that this only comes as a whole unit and you cannot get parts. You have to return and get a replacement unit. I repacked it up and had to lug it back to the store, which was a royal pain. So much work for nothing. This has potential, but I got a refund because I did not want to risk something else being in bad shape and have to go through this all again. Make individual parts available, Insignia / Best Buy!

    No, I would not recommend this to a friend

  • Rating: 5 out of 5 stars

    Great Entry Level Kegerator

    Posted
    Jacob
    • Verified PurchaserVerified Purchase
    • My Best Buy® MemberMember

    I'm 2 months into ownership of my insignia kegerator and absolutley love it. I feel it's a quality piece of equipment for the asking price. Beware that the instructions aren't that good so if you've never tapped a keg before be prepared to spray some beer and make a sticky mess.. in my case the instructions mentioned nothing about putting the gaskets into the beer line taps and it made a huge mess. Other than that set up wasn't too bad. Depending on what kind of beer you get you may wanna consider increasing beer line length. I went with Ommegang Witte for my first and it poors a little rough at 12 PSI (Ommegang reccomended setting at 13). Before getting too crazy by changing lines and what not be aware pouring out of a tap isn't the same as pouring from a bottle so make sure your using proper technique... I found that even with a rough pour I can still get a really good pour with proper technique. Only thing I would change about this is maybe some cosmetics stuff like a stainless steel faucet tower and drip pan/grille, but for the price point I can live without those things. Highly reccomended for an entry level kegerator .

    I would recommend this to a friend

  • Rating: 5 out of 5 stars

    Great Value

    Posted
    JohnD
    • Verified PurchaserVerified Purchase
    • My Best Buy® Elite Plus MemberElite Plus Member
    • Top 500 ContributorTop 500 Contributor

    For the price this is hard to beat, especially if you get it during a flash sale. If you follow instructions and have patience it works great. Can fit a full 1/2 keg, 2 1/6 kegs, or a 1/6 and a 1/4 slim keg. Not sure it could fit two 1/4 slims. 6 is the coldest setting for the temp gauge, not 1, I keep mine around 4/5 and that seems best. The PSI says put it at 10-12 but I have had the best luck with keeping foam down by using 7-9 PSI. Get a tower cooler off Amazon, only about $40 and it keeps the lines in the tower cold so the temp change doesn't foam the beer during pouring. I filled my CO2 tank at a local beer store for $14, do not overpay. Once you bring the keg/kegs home put them in the kegerator but do not attach anything and let them sit/settle and cool all day or over night. Doing some of these above things will help lead to a much more enjoyable experience.

    I would recommend this to a friend

  • Rating: 5 out of 5 stars

    Cheap and easy

    Posted
    Beerman
    • Verified PurchaserVerified Purchase
    • My Best Buy® MemberMember

    This is my most prized possession. Great for party's bbq's and get togethers. I read all reviews before purchasing and some were true and some were false. Temperature is very cold in high setting I bought a thermometer and highest setting is constant 27 degrees makes for a perfect beer. Nothing pleases me more then coming home to a perfectly cold beer to take off the edge. I did find a local shop that sold me longer beer lines to help with foaming issues. I recommend changing out to 7ft of line. After this adjustment and realizing the keg has to settle before pouring immediately out of your truck during transport has proven to solve all foaming issues. Great buy, crowd pleaser, always the topic of any get together. Best purchase I've made in the last five years.

    I would recommend this to a friend

  • Rating: 3 out of 5 stars

    Perfect for cold beer and multiple taps

    Posted
    GoodForThePrice
    • My Best Buy® MemberMember

    I was excited when I saw this kegerator on sale for $349 since it was about $200 less than every other option I had been looking at and it had duel taps. When the package arrived the box was severely damage and was scared to even open the item. The fridge had some damage to the side panel probably from a fork lift or during shipping. was hoping I could get some discount off. Since I thought it may be more of a hassle to return and since it was such a good deal - I decided to see how it works before determining if it needs to be returned. After a couple tweaks and realizing the door was bent during shipping I have the fridge holding at a steady 38 degrees. and it pours a nice cold IPA. Not sure about the other review as this version of the kegerator will definitely hold 2 - 1/6 Barrel Craft kegs or one full size keg with room to spare. For the price I got it at I am thinking I will be keeping this item as long as I don't have any other problems in next 30 days.

    I would recommend this to a friend

  • Rating: 5 out of 5 stars

    Just awesome

    Posted
    Phatmatt593
    • Verified PurchaserVerified Purchase
    • My Best Buy® MemberMember

    I love it. Setup was quick and easy. It is equal in temp to the coldest of kegerators. Temp was my biggest fear, but you definitely don't have to worry about this one at all. It supposed to be able to go all the way to 32 degrees F. Even though most beers are supposed to be served around 38F. But some people are weird. You can adjust it to wherever you like. It holds 2 1/6 barrel kegs which is perfection for your average home of beer drinkers. The big kegs will go bad too fast. I recommend following the directions. I think when people don't, that's why they have to get their system recalibrated or whatever. Although we didn't really follow the directions and everything works perfectly. Overall, I have no complaints and I can't imagine a way to improve it, especially at that price. And I have a really effing awesome imagination. Plus you can change the draft levers and what-not.

    I would recommend this to a friend

  • Rating: 5 out of 5 stars

    Duel tabs is key.

    Posted
    Jimmy
    • Verified PurchaserVerified Purchase
    • My Best Buy® MemberMember

    It was damaged when it arrived (plastic around the frame). Customer service desk at Best Buy was no help. I worked out a deal with the appliance section to keep the Kegerator. The CO2 tank was low quality but the didn't matter because I swapped it out at a welding supply place for another one full of CO2 for less than 24 bucks. Putting it together was easy, it rolls in place nicely and I would recommend keeping the CO2 inside the Kegerator not putting it outside although that is doable with this model. Duel tabs are key, it fits 2 1/6 kegs with plenty of room. Kegs are easy to install and replace. Beer is cold and I have the pressure around 6-8 psi to reduce any foam. I have the temp down to 2 and it is nice a quiet in fact I don't even hear it.

    I would recommend this to a friend

  • Rating: 5 out of 5 stars

    solid product, looks and performs great

    Posted
    NHSkier35

    This is my first kegerator so my experience is limited to friends and the occasional rental. The package arrived and after unpacking everything was in good shape except the door bracket was bent to the point the door wouldn't fit on. Fortunately a philips head screwdriver was all that was needed to lift the cover off and remove the bracket. I threw it in a vise, straightend it back out and everything then fit perfectly. Setting the keg up was simple by following the instructions. It took me about 2 hours from start to finish (including bending the bracket). After getting the regulator dialed in which took me an entire keg ( and I'm sure half a CO2 tank) it poured perfectly. It's summer and I have it set on 5 out of 6 on the thermostat (it's in my garage) and that keeps the beer nice and cold. I'm very pleased with the quality and performance of the product.

    I would recommend this to a friend

  • Rating: 5 out of 5 stars

    Amazing addition to our home bar!

    Posted
    critical
    • Verified PurchaserVerified Purchase
    • My Best Buy® MemberMember

    After shopping around for a kegerator for a couple months I decided on this one. Hard to beat its features for the price. It's extremely easy to set up if you're at all familiar with kegs and CO2 tanks. The tank does come empty, as others have noted. Easy fill or swap at Norco or other medical supply distributors. The tubes, connections, and gas regulator are very good quality. Surprisingly it came with extra components and replacement parts! The temperature control on the back offers 1-6 levels. 1 is the coldest. I went and got a thermometer for $3 and put it inside to more closely regulate it. I would also recommend purchasing draft cleaning products from online, or local brew store, to keep the internal tubes and components clean after/between kegs. I am extremely satisfied with this purchase.

    I would recommend this to a friend