Customer Ratings & Reviews

After shopping around for a kegerator for a couple months I decided on this one. Hard to beat its features for the price. It's extremely easy to set up if you're at all familiar with kegs and CO2 tanks. The tank does come empty, as others have noted. Easy fill or swap at Norco or other medical supply distributors. The tubes, connections, and gas regulator are very good quality. Surprisingly it came with extra components and replacement parts! The temperature control on the back offers 1-6 levels. 1 is the coldest. I went and got a thermometer for $3 and put it inside to more closely regulate it. I would also recommend purchasing draft cleaning products from online, or local brew store, to keep the internal tubes and components clean after/between kegs. I am extremely satisfied with this purchase.

I bought this kegerator on sale. It's been one of the best purchases I made all year. I love this thing. It comes with everything you need for standard Sanke kegs. Just get some CO2, a keg, assemble it which was really quite easy. I did convert one tap to ball lock using a conversion kit for homebrew but it was a breeze. Also after reading other reviews, I shipped to store. No dents or dings as this seems to be a problem with home deliveries. I definitely recommend this kegerator.

... well then get yourself this awesome dual tapped kegerator !!! I bought it as a gift for myself and boy do I love it ! I have a full keg of Lone Pint Brewery's Yellow Rose in there and it pours out even colder than they serve it at bars or at the Brewery ! I love my kegerator I've had it since the end of August so almost 4 months now and I don't know why I didn't just get one sooner !

I feel compelled to share my experience, especially after reading the Q&A section regarding use of 2 kegs in the cooler. The instruction book shows the following in regards to which kegs can fit inside. If you are unsure of what these look like, go to kegerator.com and look up keg sizes to see accurate pictures. 1. You can fit only (1) 1/2 Barrel Keg (typical size almost all bars and restaurants use for on tap beer) 2. You can fit (2) 1/6 Barrel Kegs 3. You can fit (1) 1/4 Barrel Slim and (1) 1/6 Barrel Keg 4. You can fit (1) 1/4 Barrel (Pony) which is short but wide ***5. You can fit (2) 1/4 Barrel Slim Kegs (Take note - the gasket does not make full contact and is roughly 1/4 inch from closing. I personally used duct tape in 3 areas (bottom,middle,top) and this is keeping the door completely closed and sealed). Obviously, I can't store mugs or glasses inside anymore because I'd rather keep (2) 1/4 Slim kegs than (1) 1/6 and (1) 1/4 keg and some mugs mainly because your beer selection opens more when you go up to the 1/4 size kegs. If the manufacturer used just a bit more material and made the depth maybe a 1/2 inch deeper, 2 would fit and the door would close no problem!! **** Besides this, the only thing I am having issues with are the faucets. If you go a few days without any pours, they seem to "seize" up and it takes a bit of strength to get them to "break" open to allow you to pour beer. For me, I have it set to level 5, but I also built a small air box inside to circulate the air. Once I put this custom box inside with USB Fans, it helped out a lot! I hope this helps someone, because between reading reviews and the Q&A, there didn't seem to be accurate details on this. Other than what I mentioned above, I must say that as if having beer at home, didn't make us lazy before, having a kegerator takes our laziness to a whole new level. The fact that I can just grab a mug and fill it up, makes me feel super lazy, but I love it! Hope this helps everyone reading!

Had this shipped to my house, it had a very small ding in the back that can't be seen when put where I want it so no problem. Easy to set up and works great. The CO2 pressure takes a little tweeking but once set works as it should. Do yourself a favor when you get your CO2 and dont trade bottles but get your new one filled. You will have to get it tested every 5 years so it pays to keep a new one.

Bought this to install into a counter top. Works very well and can easily hold a 1/2 barrel I haven't tried two 1/4 barrels or 1/6ths yet. The tap tubes are long enough if you want to put them up through a counter top just make sure you seal the opening in the top and don't get the CO2 pressure above 15.

Have had this unit for several months now and I have to say it's a great value. Overall the quality of construction is solid, runs quiet and refrigerates perfectly.. I have been keeping 2 5gal kegs of home brew on tap at all times @ 35'F w/11# psig co2. Ordered it online from Best Buy and picked up in store 3 days later, perfect.. Assembly is straight foreword and easy, maybe 30 min including unboxing.

Great product for the price, user friendly. And the most important it keeps my beer cold.

The product looks good and performs well. Setup was fairly easy and the instructions are decent. The one minor issue is that it's noisy, when cooling. Another factor to consider is that locating a CO2 supplier can be challenging; I've found that sporting goods stores will not fill a container that large.

Great price and love the two taps! Not hard to set up! Definitely worth the price!

We've used this kegerator through a full keg now and just finished the cleaning process so are ready for another keg. For the price (we got in on sale) , this was a steal! Love that it can hold two separate 1/6 barrel kegs or a full size keg. Two taps is nice....if we need them. Would likely be only using two taps if we have a large party, but definitely nice to have that option. Works like a charm.

Was a good price only was missing a few things but the customer service is fixing that which is greatly appreciated. Seems to be working great, would recommend getting more hose line for the tap so beer has more time to settle when coming out of the tap.

The kegerator looks great and cools to the exact temperature. It fit our space perfectly! The only downfall is that the top cover is made of plastic and came with a crack on the top. It doesn't effect the use but doesn't look great.

Found this unit on a 4 hr flash sale, and couldn't pass it up. I'd been looking at single tap units, and the 2nd tap on was a great bonus. It's a great looking appliance, it comes with everything you need, including a 5# Co2 tank, it's easy to put together, holds temp, basically it's perfect.

I bought this to house my home brew. After a few upgrades, it's perfect. I installed three, 5 gallon corny kegs, and have two 5lb c02 tanks. One tank inside, and one outside. One 5 gallon corny keg I have water in for sparkling water. The other I have for my beer. Would recommend this to anyone getting started in the hobby.

This kegerator does exactly what it says very well. 2 taps for 2 different beers, keeps em cold and easy to set up. I've never set anything up like this before and just followed the directions, very easy. Had it for a couple months now and already had to switch out one of the kegs, again, super easy, quick and painless actually.

The kegerator cools efficiently. It is quite easy to set up. Recommend making or buying a tower cooler as well as installing longer lines. Overall a decent product that gets the job done.

Everything worked as expected/ advertised. No leaks with CO2 system. I did buy add on USB fans and a tower cooler to help cool inside. I bought a gas manifold to add isolation valves for each keg. The one gage on the regulator indicates line pressure. Thinking of adding an additional gage for bottle pressure. Installed a wireless outdoor thermometer to monitor temp inside ($10 at Walmart). It records highest and lowest temp for 24hr period. I was surprised at how much the temp fluctuated but it helped me dial the fridge in to just right.

Keeps a keg cold. If you're using Corny Kegs, you'll have to get tubing and ball-head attachments--what comes with the unit is a single T-hose with full-keg connectors. Other than that, it works well. Quiet and cold.

Pictures don't do it justice but this is pretty big mini fridge so double check the measurements if you're unsure of your space. Overall I like the double tap feature and it's pretty easy to setup just following the basic instructions. I have two 5 gallon pony kegs in mine and have some extra room for some of my specialty beer and a stack of mugs to keep them cold. Only compliant I have like others is that mine was damaged during shipment. Wasn't anything major but it's heavy so I'm sure it gets dropped around in shipment.