Customer Ratings & Reviews

Hi ArthurD.

Thank you for taking the time to share your experience with us.

We understand how important it is for your device to detect motion consistently and reliably. The Ring Floodlight Cam Plus is designed to detect motion based on your specifications so that you are notified of all motion events that matter to you. We would love the opportunity to work with you to get your device performing optimally for your home's environment.

It sounds like you have some concerns with your device's motion detection. If your device appears to be missing a lot of motion, you may want to check the motion frequency setting. The motion frequency control allows you to reduce alerts from repetitive patterns of motion or increase alerts so you get notified about the motion events that matter to you.

Follow these steps to adjust the motion frequency:
Tap the menu (≡) on the top left of the Dashboard.
Tap Devices.
Select the device you'd like to adjust.
Tap Motion Settings.
Tap Advanced Settings.
Tap Motion Frequency.
Select Frequently, Regularly or Periodically.
Frequently: Motion detection always stays active. Shortest battery life.
Regularly: Motion detection takes a short break after each Motion Alert. Medium battery life.
Periodically: Motion detection takes a longer break after each alert. Maximum battery life.
Tap Save in the upper-right corner.

Ring Community was established to assist in providing our neighbors with the most recent news and instructional material. Four sections make up this online forum: Ring Updates, Product Boards, Tips & Tricks, and a Moderators' Corner. You can start new topics on the Product Boards with your questions or suggestions; a search function will assist you in locating subjects that other neighbors have previously posted.

Thank you,
Miyuki from Ring.

Hi ataloss.

Thank you for taking the time to share your experience with us. We understand the importance of a seamless setup process so that you can begin using your Ring Floodlight Cam Wired Plus right away. The Ring Floodlight Cam Wired Plus is designed to work in many environments and provide a seamless setup process. Rest assured, we're here to help!

We are eager to provide you with more information regarding the installation concern that you mentioned in your review. Install your Floodlight Cam Wired Plus with this step-by-step guide.

Before you begin installing your Ring Floodlight Cam Wired Plus, make sure you’re following safety code standards. Warning: Electrical shock is a is a hazard. Disconnect power to the installation area at your circuit breaker or fuse box before beginning installation. Always use caution when handling electrical wiring. Installation by a qualified electrician may be required in your area. Refer to your local laws and building codes before performing electrical work. Permits and professional installation may be required by law.

Your Floodlight Cam Wired Plus security cam must be installed on a 4“ round UL-listed weatherproof electrical box. Make sure the power is turned off at the circuit breaker.
1. Start in the Ring app.
Tap the menu (≡) on the left side of your dashboard in the Ring app.
Tap "Set up a Device."
Follow the instructions in the Ring app.
Scan the QR code on the back of the device.
2. Prepare your Floodlight Cam Wired Plus for installation.
If you’re mounting the Ring Floodlight Cam Wired Plus on an eave or overhang, rotate the lights away from the camera.
If you’re mounting it to a wall, rotate the camera downward into the installation position.
3. Remove your existing floodlight.
With the power off at the circuit breaker, remove your existing floodlight at the junction box and disconnect the wires.
If there is a metal bracket attached to the junction box, remove that as well.
4. Choose your screws.
Select a set of screws that fit your junction box from the bags marked A through F. One size does not fit all, so there are several sizes in the bags.
Save a screw from either bag B or C for one of the following steps:
Bag A: standard screws that fit most junction boxes.
Bags B and C have longer screws for recessed junction boxes.
Bags D, E, and F are best for older boxes with smaller screw holes.
5. Attach the metal mounting bracket.
Secure the metal mounting bracket with the screws you selected to the junction box, using either pair of screw holes. Be sure to align the bracket so the front text faces outward.
6. Install the plastic mounting plate.
Pull gently from the opening of the plastic plate to free it from the fixture, then feed your power wires through the opening. After your power wires are fed through the mounting plate, center it over the metal mounting bracket. If you’re installing on a wall, the UP arrow should point up when your wires have been fed through the mounting plate. If you’re installing under an eave, the arrow should point toward the wall. Then, insert one of the screws from Bag B or C into the center hole, and tighten to secure.
7. Hang up the Floodlight Cam Wired Plus.
Locate the nylon strap on the back of your Floodlight Cam Wired Plus light fixture and loop the buckle at the end over the hook on the mounting plate. Make sure that the buckle and hook are secure before releasing the light fixture.The green wire on the Floodlight Cam Wired Plus is the ground wire.
With the power still turned off at the breaker, use a wire nut from the bag marked G to connect the green wire coming from the junction box.
The white wire on the Floodlight Cam Wired Plus is a neutral wire. Use another wire nut from the bag marked G to connect the white (or neutral) wire coming from the junction box.
The black wire on the Floodlight Cam Wired Plus is a hot wire. Use another wire nut from the bag marked G to connect the black wire from your Floodlight Cam Wired Plus to the black (or hot) wire from your junction box.
Give all three wire connections and wire nuts a gentle tug to make sure they’re secure.
Warning: If you can’t easily identify the wires coming out of your junction box, have difficulty identifying them, or are uncomfortable in any way connecting them, consult a qualified electrician.
8. Mount the fixture.
Tuck the power wires into the junction box, then align the two holes on the light fixture with the threaded posts on the plastic mounting plate. Slide the light fixture onto the posts and push it firmly into place.
Secure the fixture using two of the hex cap nuts from Bag G over the ends of the threaded posts.
Remove the reversible bit from the included screwdriver and use the handle to tighten the hex cap nuts.
Once your Floodlight Cam Wired Plus is secured, apply a weatherproof silicone caulk or sealant (not included in the box) around the outside where the Floodlight Cam Wired Plus and the junction box meet.
9. Restore the power at the breaker.
Now that your Floodlight Cam Wired Plus is installed, you can turn the power back on at the breaker. The lamps on your Floodlight Cam Wired Plus will flash once it’s powered on.
10. Once your Floodlight Cam Wired Plus is installed, follow the set-up instructions in the Ring app.

We invite you to reach out to our community if any additional information is needed regarding your Ring Floodlight Cam Wired Plus. The Ring Community is our first peer-to-peer community forum, giving our customers the ability to help one another by sharing their feedback and experiences with each other.

Thank you,
Melissa from Ring.

Hi Hithereitsme. I'm glad you're enjoying the video quality on your Floodlight Cam, and I'd be happy to help with your other concerns. The lights on your Floodlight Cam shouldn't be coming on during the day or staying on all day, unless you have a Light Schedule in place. You can learn more about Light Schedules here: https://support.ring.com/hc/en-us/articles/360058421812-How-to-Use-Security-Camera-Light-Schedules-. I'd also recommend reviewing the light settings for your Floodlight Cam, as outlined here: https://support.ring.com/hc/en-us/articles/115004155866-Controlling-the-Floodlights-and-Light-Settings-on-Your-Floodlight-Cam. If this information doesn't help, try asking the Ring Community at https://community.ring.com/. The Ring Community is our peer-to-peer forum where you can interact with other neighbors and ask each other questions. All the best, Ashley from Ring.

Hi PabloD.

Thank you for taking the time to share your feedback with us. We are always looking for ways to improve our neighbor's experience, and your feedback is an invaluable part of this process. That is why we are dedicated to offering devices that help you safeguard what is most important at home, while also allowing you to connect with your neighbors from anywhere. We’re glad to read that you are finding the provided features useful.

If any additional information is needed regarding your Ring Floodlight Cam Plus, please reach out to our community. Ring Community is our first peer-to-peer community forum, giving our customers the ability to help one another and share their feedback and experiences directly with Ring. Join the Ring Community today!

Thank you,
Miyuki from Ring.

Hello Backyard,

We appreciate you sharing your Ring Floodlight Camera Plus experience with us. Our top priority, at Ring, is to ensure that our customers have the best possible experience with our products! It is important to us that you have all the necessary information needed to ensure that your installation and use is seamless.

After reading your review, it seems that you need some assistance with configuring your Ring Floodlight Camera Plus. If this is the case, we welcome you to see our help center articles on the Ring Floodlight Camera Plus. Please see our help center article on how to set up your new device: https://support.ring.com/hc/en-us/articles/360061193531-Setting-Up-Floodlight-Cam-Wired-Plus-Security-Camera-in-the-Ring-App-.

If you still have concerns regarding this, we would love to hear from you directly on our Ring Community forum. This is a platform intended for Ring users, just like yourself, to create open discussions regarding their Ring experiences, provide suggestions or feedback, and more: https://community.ring.com/.

Thank you, Jamila with Ring.