Customer Ratings & Reviews

Hi JosephG.

Thank you for taking the time to share your experience with us. We understand the importance of having your Ring Video Doorbell (2nd Gen.) record clear and concise videos so that you can effectively monitor your home. The features and technology provided by the Ring Video Doorbell (2nd Gen.) are incredibly valuable and help provide you with peace of mind about your home security. We can definitely assist you with this today, and we are confident we can find the correct settings for your home’s environment.

It sounds like the device is not performing as expected in regards to "Night Vision." With Ring Video Doorbell (2nd Generation), stay connected to your home from anywhere by seeing who’s at your door and answering it right from the Ring app. Enjoy enhanced features like upgraded video quality from 720p HD to 1080p HD, "Near Zone" motion detection in areas as close as 5 to 15 feet in front of your home, and a reimagined mounting setup that simplifies installation. To ensure that the "Night Vision" feature works as intended, make sure your Indoor Cam’s infrared light is toggled on in the Ring app. The infrared light control is in your Ring app under Video Settings. Enable "Color Night Vision" in the Ring app to help improve clarity at night.

To turn the "Color Night Vision" on or off, follow these instructions:
Open the Ring app.
Tap the "Menu" (☰).
Tap "Devices."
Select the device you want to adjust.
Tap "Device Settings."
Tap "Video Settings."
Toggle "Color Night Vision" on or off.

Although rare, there have been instances where a Ring device can experience black, pink, and other distorted video quality, like night vision video captured during daytime hours. Here are a few things to try.

Check your Ring device's signal strength.
If your Ring device is far from your wifi router, it may be experiencing connection or video issues.
Open the Ring app.
Tap the "Menu" (☰).
Tap "Devices."
Select the Ring device you would like to test.
Tap on the "Device Health" tile.
Scroll to "Signal Strength" under the "Network" section.
The green, amber, and red colors are indicators of your device connection. Green is good; red is poor.

Reboot your Ring Video Doorbell (2nd Gen.) in the Ring app.

Open the Ring app.
Tap the "Menu" (☰).
Tap "Devices."
Select the device that you wish to reboot.
Tap on the "Device Health" tile.
Scroll down to "Reboot This Device."
Give your device a few moments to start back up.

We invite you to reach out to our community if any additional information is needed regarding your Ring Video Doorbell (2nd Gen.). The Ring Community is our first peer-to-peer community forum, giving our customers the ability to help one another by sharing their feedback and experiences with each other.

Thank you,
Melissa from Ring.

Hi Daniel.

Thank you for taking the time to share your experience with us. We understand the importance of a seamless installation process so that you can begin using your Ring Video Doorbell (2nd Gen.) right away. The features and technology provided by the Ring Video Doorbell (2nd Gen.) are incredibly valuable and help provide you with peace of mind about your home security. We can definitely provide you with more information regarding the concern mentioned in your review.

We are happy to provide you with the instructions for installing your Ring Video Doorbell (2nd Gen.). With Ring Video Doorbell (2nd Generation), stay connected to your home from anywhere by seeing who’s at your door and answering it right from the Ring app. Enjoy enhanced features like upgraded video quality from 720p HD to 1080p HD, Near Zone motion detection in areas as close as 5 to 15 feet in front of your home, and a reimagined mounting setup that simplifies installation.

We recommend following these instructions when installing your Ring Video Doorbell (2nd Gen.):

For the best results, mount it around 1.2 meters above the ground.
There are two types of screws included in the product packaging:
The four wood screws are used to secure the mounting bracket to your door or wall.
The two star-shaped security screws are used to tighten the screws into the bottom of the Ring Video Doorbell (2nd Generation) faceplate to help deter theft.
You'll need to install wall anchors when installing on stucco, brick, or concrete.
Grab 4 of the wall anchors from Bag A. Using your Ring Doorbell as a template, mark 4 drill holes on the wall. Use a 1/4" masonry drill bit (not included) to drill the holes, then insert the four wall anchors.
Install the mounting bracket.
Using a Philips head screwdriver, drive the mounting screws from Bag A into your wall (or into the anchors, if installed) until they are flush with the mounting bracket.
Attach your Ring Doorbell to the mounting bracket.
Hook the slot on the rear of your Ring Doorbell onto the tab near the top of the mounting bracket.
Then, let the Doorbell pivot down to sit flush on its bracket.
Secure the doorbell.

CAUTION! If you use the wrong screws to secure the doorbell, you could damage the battery during installation, create a fire hazard, and be seriously injured.

DO NOT use any screws other than the included short security screws when securing your Ring Doorbell to the bracket.

Use the star-shaped end of the included screwdriver to insert and tighten two of the security screws from Bag B into the bottom of your Ring Doorbell.

We invite you to reach out to our Community if any additional information is needed regarding your Ring Video Doorbell (2nd Gen.). The Ring Community is our first peer-to-peer community forum, giving our customers the ability to help one another by sharing their feedback and experiences with each other.

Thank you,
Melissa from Ring.

Hi Bigpapa,

We are pleased to learn that overall, you are getting good use out of your Ring Video Doorbell (2020 Release). This device can provide a way to capture all the motion events that are relevant to your home security needs. By making a few adjustments, we're confident that you can improve the accuracy of the motion detection it provides. Our team is here to help.

It's possible that you can resolve your motion concerns by increasing your Motion Frequency settings. By changing it to Frequently, you'll have a better chance at capturing the person as they approach your property, rather than begin walking away from the door.

To better help you understand this feature and how to enable it, please follow the link below:

https://support.ring.com/hc/en-us/articles/115003477106-Understanding-and-Optimizing-Motion-Detection-with-Motion-Frequency

If you have further questions, please visit our Community Forums at https://community.ring.com/. Where you can post similar questions and have other members of the Ring Community share their experience and knowledge with you.

All the best,
Marlom at Ring

Hi OlehP.

Thank you for taking the time to share your experience with us.

At Ring, we understand it is essential to have your Ring Video Doorbell (2nd Generation) online and working properly so you can keep your home secure. The features and technology provided by the Ring Video Doorbell (2nd Generation) are incredibly valuable and help provide you with peace of mind about your home security. We are here to provide you with some information to resolve the connectivity concern mentioned in your review.

It sounds like you have some concerns with the connectivity of your device. Usually, devices falling offline repeatedly is related to poor wifi connectivity caused by signal fluctuations, channel congestion, or data loss. In rare cases, this can be caused by settings in your router.

We recommend checking the Device Health section of your Ring application to ensure the device’s RSSI is within an acceptable range. The recommended range for optimal performance is 0 to -60 for the RSSI. Visit our support center for more information on how to improve your device's signal strength.

Visit our support center for tips on how to improve your device's signal strength.

Ring Community was launched to help deliver the most current news and educational information to our neighbors. This online forum is divided into four categories: Product Boards, Ring Updates, Tips + Tricks, and a Moderators’ Corner. The Product Boards are where you can begin new topics with your questions or feedback; there is also a search option that helps you find topics that have already been posted by other neighbors.

All the best,
Nicole from Ring.